You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Flow Battery Structures to Improve Performance and Reduce Manufacturing Cost

    SBC: Faraday Technology, Inc.            Topic: 21d

    Redox flow batteries are a promising technology for electrical energy storage for renewable energy sources; however traditional redox flow batteries are limited in their use due to non-uniform pressure drops and mass transfer limitations, as well as high manufacturing costs related to the felt material costs for the electrode and component alignment challenges during manufacturing.General Statemen ...

    STTR Phase II 2013 Department of Energy
  2. 3-D nondestructive imaging techniques for mesoscale damage analysis of composite materials

    SBC: Multiscale Design Systems, LLC            Topic: AF11BT04

    ABSTRACT: An experimental and computational effort is proposed to develop a data-driven experimentally-validated framework for analysis of plastically bonded energetic materials at meso and micro scales. A unique data-mining strategy and model reduction technology based on thermodynamics and manifold learning techniques and on nonlocal dispersive reduced order model will be devised. Reduced order ...

    STTR Phase II 2013 Department of DefenseAir Force
  3. Fidelity Enhancement of Nuclear Power Plant Simulators Utilizing High Fidelity Simulation Predictions

    SBC: WESTERN SERVICES CORPORATION            Topic: 30c

    Accurate simulation of nuclear power plant behavior is necessary for both engineering and training applications. An engineering grade simulator, used for design, safety analysis and operations, is characterized by high fidelity, computational power, lack of real-time capability, and user non-interactive environment. By contrast, a training grade simulator, used for operator training and education, ...

    STTR Phase II 2019 Department of Energy
  4. High-Power, Ultra-low Noise, Heterogeneously Integrated Lasers

    SBC: Morton Photonics Incorporated            Topic: A14AT005

    In this program, Morton Photonics (MP) and its STTR partner Professor John Bowers and his research group at the University of California at Santa Barbara (UCSB) will develop two truly disruptive integrated laser devices: (1) A broadly tunable integrated laser with ultra-low linewidth, ultra-low relative intensity noise (RIN), and high output power; the Integrated Coherent Tunable Laser (ICTL), whi ...

    STTR Phase II 2019 Department of DefenseDefense Advanced Research Projects Agency
  5. Additive Manufactured Smart Structures with Discrete Embedded Sensors

    SBC: 3DFlexible Inc            Topic: A17AT024

    Recent advances in 3D structure printing and 3D direct printed electronics have widened the scope of possibilities for the Internet of Things (IoT). New near room temperature 3D direct ink writing (DIW) additive manufacturing (AM) printing processes allow many different type of sensors and they can be embedded anywhere in a structure, which offers several benefits. 1. Protection: sensors face degr ...

    STTR Phase II 2019 Department of DefenseArmy
  6. REBCO Coated Conductor Cables for Fusion Magnets

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: 22c

    The feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems. This can be done by using high-temperature superconductors, allowing for much larger temperature margins, a higher magnet performance and less mechanical degradation during operation. There are curren ...

    STTR Phase II 2013 Department of Energy
  7. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  8. Improved Capillary Guided Laser Wakefield Accelerators based on Diamond Materials

    SBC: EUCLID TECHLABS, LLC            Topic: 03d

    The laser plasma accelerator (LPA) is a very promising technology for generating gamma rays for the detection of contraband bulk nuclear materials, but is currently limited by the rate at which the beam can be pulsed. Erosion of the capillary plasma channel is the main limiting factor and can be mitigated through the use of artificial diamond to construct the channel. Computational modeling and ...

    STTR Phase II 2013 Department of Energy
  9. Tools for Parallel Adaptive Simulation of Multiphase Ballistic Flows

    SBC: SIMMETRIX, INC.            Topic: A15AT002

    This project will provide state-of-the-art predictive capabilities for simulating systems central to advancing the U.S. Army’s modernization priorities related to long-range precision fires and future vertical lift platforms. The goals of the project are to: (1) Produce geometry and meshing technologies that support the modeling and discretization techniques needed to explicitly track evolving/i ...

    STTR Phase II 2019 Department of DefenseArmy
  10. Low Cost Data Acquisition Synchronization for Nuclear Physics Applications

    SBC: KLIMA JOANNA            Topic: 27b

    The DOE Office of Nuclear Physics (NP) seeks innovations that will advance our nation’s capability to perform nuclear physics research, and more specifically to improve DOE Nuclear Physics (NP) Facilities and the wider NP community experimental programs. For example, data acquisition (DAQ) for the Facility for Rare Isotope Beams (FRIB), currently under construction, will require considerable spe ...

    STTR Phase II 2019 Department of Energy
US Flag An Official Website of the United States Government