You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Next-Generation Composite Flywheel Design for Shock and Vibration Tolerant, High Density Rotating Energy Storage

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: N13AT022

    The overall objective of the Phase I and Phase II proposed effort is to design and demonstrate the ability to develop a high-speed shock tolerant composite flywheel energy storage system (FESS) using a low cost manufacturing process. The Phase I tradeoff design studies will assess the FESS size, operating speeds and material requirements needed to achieve the energy density levels and charge/disch ...

    STTR Phase I 2013 Department of DefenseNavy
  2. Modeling of Integrally Bladed Rotor (IBR) Blends

    SBC: SIMMETRIX, INC.            Topic: N13AT002

    Integrally bladed rotors (IBR), also called blisks, are becoming increasingly common in the compressor and fan sections of modern turbine engines. The integration of the blades and disks into a single part has the advantages of reduced part count, reduced weight, increased reliability, and increased performance. However, a drawback of this technology is that individual blades cannot be easily repl ...

    STTR Phase I 2013 Department of DefenseNavy
  3. Compact, cold-atom clock for Navy field use

    SBC: VESCENT TECHNOLOGIES INC.            Topic: N13AT018

    Vescent Photonics proposes to develop a compact laser system and integrate it with a cold-atom micro primary standard developed under the DARPA IMPACT program. In phase I we will investigate performance enhancements resulting from immobilizing the cold-atom sample with an optical lattice formed from an optical field whose wavelength is chosen to minimize the differential light shifts between the s ...

    STTR Phase I 2013 Department of DefenseNavy
  4. LEARNING-BASED APPROACH FOR RELEVANT DATA EXTRACTION (LARDE)

    SBC: ROBOTIC RESEARCH OPCO, LLC            Topic: N13AT016

    Autonomous systems continue to be outfitted with larger amounts of sensors that are capable of collecting extremely large amounts of data over the course of a mission. Even autonomous systems with high storage capacities can run into storage limitations when burdened with large amounts of sensor data over long mission durations. This proposal will develop a Learning-based Approach for Relevant Dat ...

    STTR Phase I 2013 Department of DefenseNavy
  5. High Efficiency Computation of High Reynolds Number Flows

    SBC: Technosoft, Inc            Topic: N13AT009

    Although advancements in CFD technology and high performance computing have proven to be effective and reasonably accurate in assessing the hydrodynamic performance of naval vessels, the effort required to develop associated analysis models remains a challenging and time consuming task. Decomposing and manipulating the design geometry for mesh construction, while capturing near-field and far-field ...

    STTR Phase I 2013 Department of DefenseNavy
  6. Interlaminar Mode I and Mode II Fracture Toughnesses in Ceramic Matrix Composites (CMCs)

    SBC: Thornton Tomasetti, Inc.            Topic: N13AT008

    Susceptibility to delamination is one of the major weaknesses of ceramic matrix composites (CMCs). Knowledge of the resistance of composite to interlaminar fracture is essential for life cycle prediction analyses of structural components. The current test method for Mode I-interlaminar fracture toughness, the double cantilevered beam (DCB), is not satisfactory for thin CMC specimens because the co ...

    STTR Phase I 2013 Department of DefenseNavy
  7. Maneuver Prediction and Avoidance Logic For Unmanned Aircraft System Encounters with Non-Cooperative Air Traffic

    SBC: NUMERICA CORPORATION            Topic: N13AT003

    For Unmanned Aircraft Systems (UAS) to operate seamlessly in both the U.S. National Airspace System (NAS) and abroad, it will be crucial that they possess a sense-and-avoid (SAA) capability that can ensure safe operations among maneuvering, non-cooperative aircraft. Numerica Corporation, in partnership with Johns Hopkins University, proposes to develop a set of algorithms to model the uncertaintie ...

    STTR Phase I 2013 Department of DefenseNavy
  8. Compact robust testbed for cold-atom clock and sensor applications

    SBC: COLDQUANTA, INC.            Topic: N13AT018

    As strontium and other alkaline-earth metals become increasingly attractive for ultracold-atom applications, there is a growing need to develop compact, robust systems for cooling, trapping, and studying these elements. In this proposal, ColdQuanta will team with Dr. Jun Ye at JILA and the University of Colorado at Boulder to develop a portable, turn-key system that can produce, utilize, and optic ...

    STTR Phase I 2013 Department of DefenseNavy
  9. Mechanical Property Characterization and Modeling for Structural Mo-Si-B Alloys for High Temperature Applications

    SBC: Imaging Systems Technology, Inc.            Topic: N13AT012

    Under this STTR, Imaging Systems Technology (IST) in cooperation with Georgia Institute Technology (GIT) will develop and mature models to predict mechanical properties of refractory alloys with an eye toward tailoring these alloys for specific applications. In particular, this research will focus on addressing core aspects of Integrated Computational Materials Engineering (ICME) as it applies to ...

    STTR Phase I 2013 Department of DefenseNavy
  10. Probiotics for Maintaining Dolphin (Tursiops truncatus) Health and the Readiness of the U.S. Navy"s Marine Mammal Systems

    SBC: AGAVE BIOSYSTEMS INC.            Topic: N13AT013

    Agave BioSystems, with their academic partners at the Mote Marine Laboratory, proposes to develop probiotic pharmaceuticals from indigenous commensal microbes to enhance gastrointestinal health in the bottlenose dolphin (Tursiops truncatus). The dolphin gastrointestinal microbiome will be characterized by 16S rRNA deep sequencing, and culturable commensals will be isolated by plating dolphin gastr ...

    STTR Phase I 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government