You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: Inview Technology Corporation Topic: A12aT007
The main goal of the Phase II program is to build and test an operational prototype compressive sensing (CS) camera capable of high-speed change detection. Based on the algorithmic development, hardware modeling and simulation achievements of Phase I, we have defined a real-time CS framework that will be implemented in Phase II in an operational prototype. This framework, similar to Phase I, begin ...STTR Phase II 2013 Department of DefenseArmy
SBC: APPLIED NANOTECH, INC. Topic: A12aT018
We propose to leverage the expertise of Applied Nanotech, Inc. (ANI) in building highly sensitive, selective, portable and versatile GC/DMS instruments, to create a system to uniquely identify pollen species in complex mixtures based on their VOC profile. This project will determine which VOCs shall be collected and how many pollen grains are needed in order to increase the confidence of accuratel ...STTR Phase II 2013 Department of DefenseArmy
SBC: LYNNTECH INC. Topic: A11aT013
Methanol crossover of commercial Nafion membranes is a major issue that results in lowering of the efficiency of direct methanol fuel cells (DMFCs). A biomimetic approach for the membrane design using either proton conducting nanochannels and/or nanothin barrier layer can produce DMFC membranes with highly selective and fast proton transfer. In the Phase I project, Lynntech demonstrated the feasib ...STTR Phase II 2013 Department of DefenseArmy
SBC: TDA RESEARCH, INC. Topic: A12aT005
Decontamination of chemical and biological threats demands a very reactive solution. It is ideal to generate the decontaminants on-site: the activated decontaminant is highly reactive and quickly destroys chemical and biological warfare agents; prior to activation the ingredients can be safely stored for years, shipped, and handled. TDA's electrochemical decontamination (eClO2) technology u ...STTR Phase II 2013 Department of DefenseArmy
SBC: RADIATION MONITORING DEVICES, INC. Topic: A13AT013
The goal of the proposed program is to identify an effective passivation material and develop a capable passivation methodology to protect highly reticulated HgCdTe surfaces. The proposed passivation material and technique using highly conformal atomic layer deposition (ALD) will allow the DOD to develop high-performance infrared focal plane array detectors that can operate under wider operating c ...STTR Phase I 2013 Department of DefenseArmy
SBC: BOSTON APPLIED TECHNOLOGIES, INCORPORATED Topic: A11aT018
Microwave technologies have found a broad range of and growing applications, especially in the area of communications. Many microwave tunable devices are bulky and incompatible with RF semiconductor IC technology. The slow tuning response speeds, high material losses, and device noise at higher frequencies have also limited their widespread applications.Recent advances in processing complex oxide ...STTR Phase II 2013 Department of DefenseArmy
SBC: Fulcrum Bioscience, LLC Topic: A13AT007
The synthesis of ammonia through nitrogen fixation is a vital component to all plant life and the world economy as a fertilizer and commodity chemical. The global industial production of ammonia exceeded 140MM tons in 2009 and is expected to grow to 160MM tons by 2020. Most ammonia,>90% is synthesized through the Haber-Bosch processThe Haber-Bosch process produces more than 90% of the industrial ...STTR Phase I 2013 Department of DefenseArmy
SBC: Sciperio, Inc. Topic: A13AT010
Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...STTR Phase I 2013 Department of DefenseArmy
SBC: NexGen Composites LLC Topic: A13AT021
There is a great need and opportunity to develop lower cost manufacturing process for ceramic tile-based composite armor system for military tactical vehicles. The threat levels encountered by the military tactical vehicles, particularly due to the Improvised Explosive Devices (IED) pose an ever-increasing need for more lightweight and effective vehicle armor system at an affordable cost. A low-co ...STTR Phase I 2013 Department of DefenseArmy
SBC: TDA RESEARCH, INC. Topic: A13AT019
Approximately 5-6% of military injuries involve some form of major peripheral nerve injury with little chance of spontaneous healing. Currently these injuries lead to major impairment of voluntary muscle function in the limbs and extremities, making tasks of walking, reaching, grasping, etc. very difficult or impossible for many patients. It is not enough to focus therapeutic treatment on the se ...STTR Phase I 2013 Department of DefenseArmy