You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS)

    SBC: MV INNOVATIVE TECHNOLOGIES, LLC            Topic: N17AT030

    Optonicus proposes development of the Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS) laser additive manufacturing (LAM) system. The WALAM-ABS metal additive manufacturing system will solve long-standing drawbacks imposed by current single-point selective laser melting LAM technology through the use of wide-area processing based on proprietary multi-beam fib ...

    STTR Phase II 2018 Department of DefenseNavy
  2. Tools for Parallel Adaptive Simulation of Multiphase Ballistic Flows

    SBC: SIMMETRIX, INC.            Topic: A15AT002

    This project will provide state-of-the-art predictive capabilities for simulating systems central to advancing the U.S. Army’s modernization priorities related to long-range precision fires and future vertical lift platforms. The goals of the project are to: (1) Produce geometry and meshing technologies that support the modeling and discretization techniques needed to explicitly track evolving/i ...

    STTR Phase II 2019 Department of DefenseArmy
  3. Medium Voltage Direct Current (MVDC) Fault Detection, Localization, and Isolation

    SBC: ISSAC Corp            Topic: N16AT009

    During the Phase II effort, the ISSAC Team will investigate several objectives and questions posed in Phase I efforts, in order to best develop a draft specification for NGES MVDC DLI systems. This includes exploring notional and conceptual architectures and discerning thresholds for DLI parameters; exploring individual and hybrid protection plan technologies to drive performance requirements for ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Modular Thermal Management System for Electronics Enclosures

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N16AT014

    The heat load from Navy combat system electronics housed in Mission Critical Enclosures (MCEs) continues to increase. During Phase I, Mainstream designed and demonstrated a modular, scalable thermal management system (TMS) for existing and future MCE cabinets with triple the cooling capacity of the legacy TMS. In Phase II, Mainstream will transition the TMS to the Navy for retrofit and next-genera ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Super-Efficient Mid-Infrared Quantum Cascade Lasers with Continuous-Wave Wall-Plug Efficiencies in Excess of 40%

    SBC: INTRABAND, LLC            Topic: N17AT006

    The technical objectives of this proposal are: 1) demonstrate a single-element, 4.6 micron-emitting quantum-cascade-laser (QCL) with > 40 % continuous-wave (CW) wallplug efficiency (WPE) at room temperature; (2) perform a comprehensive simulation to achieve a design for a monolithic QCL operating in a single spatial mode to 10 W CW output power; 3) perform a thermal-management analysis for the des ...

    STTR Phase II 2019 Department of DefenseNavy
  6. Principled Design of an Augmented Reality Trainer for Medics

    SBC: UNVEIL LLC            Topic: DHP17A003

    Augmented reality (AR) offers the ability to enhance existing combat medic training by including perceptual cues and adaptive training elements to traditional simulation-based training using manikins. Unveil has developed a training system called the Macrocognitive AR Trainer (MART). MART is designed to foster the development of macrocognitive skills (e.g., sensemaking, assessment skills, mental m ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  7. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  8. Cyber Ready-and-Aware Mindset for Protection and Resilience against Threats (Cyber RAMPART)

    SBC: SOAR TECHNOLOGY, LLC            Topic: N17AT023

    We propose to develop Cyber RAMPART as an extensible and customizable training delivery tool with near-term transition potential. It will offer shipboard operations personnel the opportunity to develop foundational cyber awareness knowledge and skill that prepares them to participate in their ship’s cyber defense mission and to hit the ground running in future fleet-level exercises that include ...

    STTR Phase II 2018 Department of DefenseNavy
  9. Solar Blind MgZnO Photodetectors

    SBC: AGNITRON TECHNOLOGY, INC.            Topic: A13AT006

    This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

    STTR Phase II 2014 Department of DefenseArmy
  10. Innovative Methodologies for Manufacturing of Lethality Test Articles

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost. However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat target ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government