List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. High-Power Deep-Ultraviolet Tunable CW Laser

    SBC: Aculight Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  2. LONG TAPER HONE

    SBC: C-K Technologies L.L.C.            Topic: N/A

    The proposed project will develop an advanced control system (software and related hardware) and adapt this control system to a well developed and commercially available honing machine. The resultant system will be capable of producing controlled inside cylinder geometries with controlled taper and cylinder size along the length of a cylinder bore on a controlled basis. The desired geometry (diame ...

    SBIR Phase I 1994 Department of DefenseAir Force
  3. Advanced Composites Recycling/Reuse Program

    SBC: ENVIRONMENTAL ENGINEERING GROUP, INC.            Topic: N/A

    Advanced composites usage has grown ever since their introduction in the l970's. Consequently, a large volume of advanced composites waste has been generated over the years because of the high scrap rate (two-to-one) in composite production. The prevalent method of disposal into landfills is becoming prohibitive due to increased cost, negative public opinion, and legislation. This project will add ...

    SBIR Phase I 1994 Department of DefenseAir Force
  4. Millimeter Wave (MMW) Radar Measurement of Ice Formation on Aircraft Wings

    SBC: Fred M. Lightfoot & Associates            Topic: N/A

    Army aircraft operating at altitudes below 25,000 ft are at risk when liquid water is present in the atmosphere within a critical temperature range. Currently, existing ice detection and accretion measurement systems have particular features that limit their application for Army aircraft utilization. A multi-mode, MMW radar sensor is proposed that has unique features that make it useful for both f ...

    SBIR Phase I 1994 Department of DefenseArmy
  5. Fast and Robust Algorithms for Process Modeling of Ceramic Matrix Composite Processing Simulation

    SBC: MO-SCI Corp.            Topic: N/A

    It is proposed to develop and validate fast and robust algorithms and computer codes to simulate the processing of ceramic matrix composites. While the processing and parameters that control the efficient manufacturing of ceramic matrix composites can be studied experimentally, a validated mathematical model that accounts for the microstructural and processing parameters is a very economical and u ...

    SBIR Phase I 1994 Department of DefenseAir Force
  6. Automated Bobbin-Baselayer Inspection System

    SBC: Machine Design Engineers,            Topic: N/A

    A fast and precise measurement system is needed for production line testing of bobbin baselayers and wound bobbins. This system should also support investigations to establish the acceptance criteria. The video metrology machine proposed for Phase II will achieve rapid image acquisition by taking a sequence of video frames as the bobbin is rotated and translated through the field of view. The lase ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  7. Projectiles

    SBC: Nipro            Topic: N/A

    This proposal consists of a program for the deveopment of a technology to use an unconventional material as projectiles, warheads and fragmentation dvices in weapons systems. Some research on the use of this material as projectiles has been accomplished with private funds. However, due to the unavailability of mechanisms to propoel larger projectiles onto target materials, testing has been limited ...

    SBIR Phase I 1994 Department of DefenseAir Force
  8. Optoelectronic Interconnect Technology Demonstration for Advanced C3I Netwcrk Communications

    SBC: OPTICOMP CORP.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  9. Non-Invasive Communications with Embedded Sensors in Composites

    SBC: PRODUCTION PRODUCTS MANUFACTURING & SALES CO., INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  10. MULTILAYER FERROELECTGRIC CAPACITOR FOR HIGH ENERGY DENSITY STORAGE DEVICES

    SBC: Research International, Inc            Topic: N/A

    Roust, multilayer thin-fim ferroelectric capacitors are proposed that provide high electrical energy density storage at high voltage and high electric field. This is accomplished through a combination of novel planar internal structures and state-of-the art fabrication procedures. Modeling utilizing semiconductor heterojunction device physics predicts that large improvements in energy storage dens ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government