You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Optical Diagnostics/Modeling Platform for Plasma Assisted Combustion in Vitiated Air

    SBC: SPECTRAL ENERGIES LLC            Topic: AF13AT04

    ABSTRACT: Modern gas-turbine engines designs for the next-generation warfighter need to reduce exhaust gas temperatures to reduce effective thermal footprint thereby improving the mission capability. In such situations, high-altitude engine operation is often limited by the overall combustion efficiency, lean flame blow out (LBO) limit, and combustion instabilities that results in narrower opera ...

    STTR Phase I 2014 Department of DefenseAir Force
  2. Advanced Materials for the Design of Lightweight JP5/JP8/DS2 Fueled Engines for Unmanned Aerial Vehicles (UAVs)

    SBC: Northwest Uld, Inc.            Topic: N10AT001

    Northwest UAV Propulsion Systems proposes using our purpose built heavy fuel engine designed and built in the USA for small unmanned aerial systems in the tier 2 & 3 class. We will be adding a lightweight ceramic material set combined with FEA (Finite Element Analysis) and heavy fuel atomizer (IRAD Project) to create a lightweight engine for a SUAS or STUAS class UAVs. The Ceramic material set is ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Advanced Diagnostic for Performance and Combustion Characterization in Rotational Detonation Rocket Engine (RDRE)

    SBC: Exo-Atmospheric Technologies LLC            Topic: AF19AT011

    Rotating Detonation Rocket Engines (RDRE)are being developed to take advantage of the near instantaneous heat release potential of detonation waves versus conventional deflagration-based chemical reactions in combustion applications. However, the detonation product environment is extreme and current instrumentation to measure wall / surface conditions within the detonation chamber are lacking. The ...

    STTR Phase I 2019 Department of DefenseAir Force
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: SENVOL LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  7. Additive Manufacturing of Multifunctional Nanocomposites

    SBC: Sciperio, Inc.            Topic: A13AT010

    Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

    STTR Phase I 2013 Department of DefenseArmy
  8. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  9. Adaptive Quantum-Dot Photodetectors with Bias-Tunable Barriers

    SBC: ESENSORS INC.            Topic: AF08BT02

    The proposed research program focuses on design, fabrication, and characterization of quantum-dot infrared photodetectors (QDIPs) which features bias-tunable parameters, including the spectral response, optical gain, and operating time. Wide variations of detector parameters can be realized through the bias-tunable potential barriers surrounding quantum dots. Changes in bias will transform the ba ...

    STTR Phase I 2010 Department of DefenseAir Force
  10. Adaptive Quantum-Dot Photodetectors with Bias-Tunable Barriers

    SBC: ESENSORS INC.            Topic: AF08BT02

    Esensors, with SUNY at Buffalo and SUNY at Albany as a subcontractor, will simulate, fabricate, experimentally investigate, evaluate, and deliver aprototype of a new adaptive IR photodetector based on advanced quantum dot (QD) structures. The detector’s operating principle is based on a new concept of the photoelectron lifetime tunable via adjustable potential barriers in QD structures. The phot ...

    STTR Phase II 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government