You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: GLOBAL AEROSPACE CORPORATION Topic: AF16AT24
The Air Force is interested in developing technology that would enable long duration hypersonic flight with reusable aircraft. Hypersonic flow presents many design challenges that can be encapsulated into an aerothermoelastic problem, i.e., a complex dyn...STTR Phase I 2016 Department of DefenseAir Force
SBC: FREEDOM PHOTONICS LLC Topic: AF14AT13
This work will focus on the development of monolithic SWIR focal plane array technologies using CMOS or CMOS compatible fabrication technology. This will be realized on a Silicon substrate and incorporate APD+TIA arrays and be scalable to Megapixel arrays and coherent receiver operation for capture of the full optical wavefront vector information.STTR Phase II 2016 Department of DefenseAir Force
SBC: EXOANALYTIC SOLUTIONS INC Topic: AF16AT05
ExoAnalytic Solutions, teamed with Texas A&M University, will develop Highly-mobile Autonomous Rapidly Relocatable Integrated Electro-optical Resources (HARRIER) with the goal being to design and demonstrate tracking of resident space objects (RSOs) in n...STTR Phase I 2016 Department of DefenseAir Force
SBC: Eureka Aerospace Topic: A14AT004
This proposal addresses the problem of PCSS/laser trigger integration using a single monolithic laser diode array, thus simplifying the entire optical delivery network necessary for efficient operation of PCSSs. The proposal constitutes a logical continuation of Phase I effort where the main focus was on the detailed design of the PCSS/laser diode array (LDA) integrated architecture. In Phase II ...STTR Phase II 2016 Department of DefenseArmy
SBC: NESS ENGINEERING, INC. Topic: A14AT004
The objective of this Phase II proposal is to continue the development of a Photoconductive Semiconductor Switch (PCSS) with an integrated optical trigger that can switch at least 30 kV, 1 kA, 20 ns pulses with jitter 108 shots. Ness Engineering, Inc. (NEI) and Texas Tech University (TTU) propose to utilize wide bandgap materials to demonstrate lock-on switching and allow much less optical trigger ...STTR Phase II 2016 Department of DefenseArmy
High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection SystemSBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC. Topic: N15AT009
Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...STTR Phase II 2016 Department of DefenseNavy
SBC: CFD RESEARCH CORPORATION Topic: DHP16A001
Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...STTR Phase I 2016 Department of DefenseDefense Health Agency
SBC: HYPERCOMP INC Topic: AF14AT07
In this program, HyPerComp and University of Michigan have teamedtogether to develop a high-order grid generator for Euler and viscousmeshes. The grid generator is based on HyPerComps successful generalpurpose CAD2Mesh software and is being integrated with HyPerCompsHDphysics and U. Michigans XFlow DG high-order solvers. High-order gridgeneration methods are being implemented to accurately capture ...STTR Phase II 2016 Department of DefenseAir Force
SBC: APIC CORPORATION Topic: AF16AT28
Tensile-strained germanium tin structures will be developed for infrared emitters and detectors that are compatible with silicon fabrication processes.Optical detectors in the wavelength range of 2-5 microns will be developed by using GeSn on silicon ...STTR Phase I 2016 Department of DefenseAir Force
Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and MagnesiumSBC: Adranos Energetics LLC Topic: DTRA16A002
While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency