You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
-
Diamond Cathode Coating for Spacecraft Charge Mitigation
SBC: Physical Sciences Inc. Topic: AF18AT011Physical Sciences Inc. (PSI) proposes the development of a composite laminate cathode coating based largely on consumer off the shelf (COTS) industrial materials functionalized to possess a low work function, negative electron affinity surface. The cathode coating is applicable to any surface of a spacecraft, regardless of shape or material, and allows passive one wire operation for spacecraft cha ...
STTR Phase I 2018 Department of DefenseAir Force -
Stable High Bandwidth AO Control with physical DM constraints
SBC: Guidestar Optical Systems, Inc. Topic: AF18AT008Adaptive optics (AO) system performance is hindered by the mechanical limits of the deformable mirror (DM), namely stroke limits, interactuator stroke limits, and mechanical resonance.The nature of the multi-in multi-out (MIMO) control system does not lend itself well to notch filters to combat the mechanical resonances, and the stroke limits introduce non-linearities to the system.The traditional ...
STTR Phase I 2018 Department of DefenseAir Force -
Novel Ionic liquids for Reversible Electroplating
SBC: BUSEK CO INC Topic: AF16AT20Busek Co. Inc. and The University of Notre Dame propose to develop room-temperature ionic liquids (ILs) that are robust, non-volatile, transparent, radiation hard, and atmospherically tolerant for use in electrolytes for reversible electroplating applica...
STTR Phase I 2016 Department of DefenseAir Force -
Open Standard for Display Agnostic 3D Streaming (DA3DS)
SBC: Third Dimension Technologies LLC Topic: AF16AT07The Air Force has identified a need for the creation of a common streaming model for 3D data that is agnostic to the display technology. To address this need, Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) propose to form a c...
STTR Phase I 2016 Department of DefenseAir Force -
AgileBeam Reconfigurable Free Space Optical Communication System
SBC: SA Photonics, Inc. Topic: AF18AT010Free Space Optical (FSO) communication systems provide many benefits for satellite communications, including high data rates and low Size, Weight and Power (SWaP) compared to traditional RF communication systems.Additionally, FSO systems operate without RF emissions and are inherently immune to RF interference and jamming.The narrow optical beams and small Field-of-View of the optical receivers al ...
STTR Phase I 2018 Department of DefenseAir Force -
Anisotropic Property Manipulation of Selective Laser Melted GRCop-84
SBC: SPECIAL AEROSPACE SERVICES Topic: AF18AT009In partnership with the Colorado School of Mines Alliance for the Development of Additive Processing Technologies and with support from the Johns Hopkins University Energetic Research Group, Special Aerospace Services will provide the Air Force with characterization of fully dense Selective Laser Melted GRCop-84 subjected to a variety of manipulations that affect key performance metrics for regene ...
STTR Phase I 2018 Department of DefenseAir Force -
Hypersonic Experimental Aerothermoelastic Test (HEAT)
SBC: Global Aerospace Corporation Topic: AF16AT24The Air Force is interested in developing technology that would enable long duration hypersonic flight with reusable aircraft. Hypersonic flow presents many design challenges that can be encapsulated into an aerothermoelastic problem, i.e., a complex dyn...
STTR Phase I 2016 Department of DefenseAir Force -
Volumetric Wavefront Sensing for the Characterization of Distributed-Volume Aberrations
SBC: Guidestar Optical Systems, Inc. Topic: AF18AT006Modern Directed Energy (DE) missions require target engagements at low elevation angles and long ranges.These engagement geometries require propagation through distributed-volume turbulence. To correct for distributed-volume turbulence effects, an estimation of the turbulence along the propagation path is required. Correcting for these image aberrations will improve the quality of the target image ...
STTR Phase I 2018 Department of DefenseAir Force -
Intelligent and Multiplexable Ultra-High-Temperature Fiber-Optic Pressure Sensors for Robust Distributed Engine Control
SBC: INTELLIGENT FIBER OPTIC SYSTEMS CORP Topic: AF16AT18Next-generation intelligent engines will operate at higher temperatures for increased efficiency and will migrate from centralized to distributed control. There is critical need for sensors for operation at ultra-high temperatures (3000F). Conven...
STTR Phase I 2016 Department of DefenseAir Force -
Modeling and Simulation of Lean Blowout in High-Pressure Swirl-Stabilized Combustors
SBC: Metacomp Technologies, Inc. Topic: AF16AT14The ability of Large-eddy simulation (LES) techniques to accurately predict combustion instabilities and the onset of lean blow-out is not yet firmly established, especially in realistic operating conditions. A number of modeling choices play an importan...
STTR Phase I 2016 Department of DefenseAir Force