You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Membrane Process to Recover and Use Methane Emissions

    SBC: MEMBRANE TECHNOLOGY AND RESEARCH, INC.            Topic: N/A

    Methane is an important global warming gas. Large amounts of methane and other light hydrocarbons are produced as solution gas in the production of oil, and as biogas from landfills and animal feedlots. Some of this gas is emitted directly to the atmosphere, some is flared, and some (from the very largest sources) is used as fuel in specially modified turbines or engines to generate electricity. T ...

    SBIR Phase I 2001 Environmental Protection Agency
  2. Combined Centrifugal Separator/Membrane Ultrafiltration System for Shipboard Treatment of Bilge and Ballast Water

    SBC: MEMBRANE TECHNOLOGY AND RESEARCH, INC.            Topic: N/A

    Ships generate large volumes of bilge and ballast water which, to meet new environmental regulations, will require treatment prior to overboard discharge. Such wastewaters contain high levels of emulsified and free-phase oil and suspended solids. Treatment by ultrafiltration can produce dischargeable water, but all currently available membranes are finely porous and only moderately hydrophilic. Th ...

    SBIR Phase I 2001 Environmental Protection Agency
  3. High Altitude Fuel Injection

    SBC: Mide Technology Corporation            Topic: N/A

    Mide Technology Corporation proposes to develop a fuel injection system for automotive combustion control. The design is composed of a fast-acting piezoelectric actuator to operate a fuel injection valve and emission sensors located in the exhaust, both used in concert with a rapid-learning control algorithm to reduce engine NOx, hydrocarbon (HC), and particulate emissions without sacrificing fuel ...

    SBIR Phase I 2001 Environmental Protection Agency
  4. Innovative Sonic Technology for Ex-Situ Treatment of Mercury Contaminated Waste

    SBC: RESODYN CORPORATION            Topic: N/A

    A novel combination of technologies is proposed by Montec Research to improve ex situ mercury remediation. The combination of acoustic agitation, iodine leaching chemistry, and real-time management of leach oxidation potential will allow mercury to be extracted economically from soils, sediments, and debris. Additional residue-washing steps are proposed to help residues pass the Universal Treatmen ...

    SBIR Phase I 2001 Environmental Protection Agency
  5. Metals Recycling from Waste Sludges by Ammoniacal Leaching Followed by Solvent Extraction

    SBC: Mse Technology Applications, Inc.            Topic: N/A

    The Phase I objective is to demonstrate the feasibility of applying recently developed enhanced ammoniacal leaching techniques and solvent extraction reagents to recycle nickel, copper, cobalt, zinc, and cadmium from hydroxide sludges such as those produced by electroplating shops, metal finishers, treatment of acid mine drainage, and industrial wastewater in general. Electroplating sludges, class ...

    SBIR Phase I 2001 Environmental Protection Agency
  6. Nano-engineered Hazardous Metal-free Electronic Components

    SBC: Nanomaterials Research LLC            Topic: N/A

    Electronic components (resistors, capacitors, inductors, batteries, and piezoelectric components) based on nickel, cobalt, lead, and other hazardous materials account for more than 50 percent of electronic components consumption in the United States and worldwide. The exceptional and ongoing growth of the electronic components industry suggests that this trend will increase in the future, and that ...

    SBIR Phase I 2001 Environmental Protection Agency
  7. Nanocomposite Sensor Array for the Detection of Multiple Toxic Air Pollutants

    SBC: Nanomaterials Research LLC            Topic: N/A

    This proposal is intended to develop a low-cost, sensitive, and selective sensor array for the detection of volatile organic compounds (VOCs). In particular, the final sensor array will detect a subset of VOCs from the Toxic Air Pollutants List. This subset of VOCs is based on those toxics identified as having the greatest negative impact on public health, also known as the Urban Air Toxics Strate ...

    SBIR Phase I 2001 Environmental Protection Agency
  8. A Process for On-Line Quality Control of Recycled Plastic Flake

    SBC: National Recovery Technologies LLC            Topic: N/A

    Generally, it is accepted that for plastics recycling to be economically viable in the long term, recycled resins must be competitive with virgin resins. To compete with virgin material, new applications must be made available for recycled resins. Such applications will require that the recycled resin be of a high purity level. Thus, many processors are requiring ever-tightening contamination limi ...

    SBIR Phase I 2001 Environmental Protection Agency
  9. Sensor Fusion for Contaminant Detection and Removal from Plastic Recycle Streams

    SBC: National Recovery Technologies LLC            Topic: N/A

    Post-consumer plastics have become a tremendous burden upon our waste disposal system. Although plastics constitute only about 9 percent by weight of municipal solid waste, they occupy approximately one-fourth the volume of the waste stream. The U.S. EPA recommends recycling of plastics as the best solution to the problem. However, contamination of plastics within the recycle stream by foreign mat ...

    SBIR Phase II 2001 Environmental Protection Agency
  10. Sensor Fusion for Contaminant Detection and Removal from Plastic Recycle Streams

    SBC: National Recovery Technologies LLC            Topic: N/A

    Post-consumer plastics have become a tremendous burden upon our waste disposal system. Although plastics constitute only about 9 percent by weight of municipal solid waste, they occupy approximately one-fourth the volume of the waste stream. The U.S. EPA recommends recycling of plastics as the best solution to the problem. However, contamination of plastics within the recycle stream by foreign mat ...

    SBIR Phase I 2001 Environmental Protection Agency
US Flag An Official Website of the United States Government