List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Commercial Development of Advanced UV Curable Index Matching Materials

    SBC: Tetramer Technologies,L.L.C.            Topic: N112125

    In this Phase II SBIR program, Tetramer Technologies will develop new, commercially attractive, patentable, UV curable refractive index (RI) matching materials which have a significant shelf life in the uncured state. The value proposition to the customer working with fiber optic cabling will be increased reliability in refractive index matching adhesives(IMA) for fiber optic coupling and increase ...

    SBIR Phase II 2013 Department of DefenseNavy
  2. Closed Loop Frequency Control for Tunable High Quality Factor Filters

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: SB12A005

    The proposed project will focus on the development of closed loop frequency control hardware and algorithms for control of high quality factor tunable microwave filters based upon evanescent mode resonators. The developed controller will be integrated with a representative filter. As a system demonstration, the integrated filter/controller module will then be applied to a next generation frequency ...

    STTR Phase II 2013 Department of DefenseDefense Advanced Research Projects Agency
  3. Tunable Bandstop Filters for Suppression of Co-site Interference and Jamming Sources

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: N11AT016

    This project will develop tunable notch filter for the mitigation of co-site interference and jamming sources. The novel filter technology explored in the Phase I program has displayed excellent potential to provide wide tuning capability, low out-of-band insertion losses, deep notch depths, compact form factors and low power consumption. Furthermore, by using novel MEMS tuning membranes, high fil ...

    STTR Phase II 2013 Department of DefenseNavy
  4. Development of a Direct Ethanol Fuel Cell System with Anion Exchange Membranes

    SBC: Tremont Technology LLC            Topic: A11022

    Fuel cell technology as a clean and efficient energy source has several advantages for military applications, including lower weight, better safety, shorter down time (no recharge time, unlike secondary batteries), and lower heat signature (as compared to combustion engines). Ethanol has the advantage of being nontoxic and less flammable, which are attractive features for both military and comme ...

    SBIR Phase II 2013 Department of DefenseArmy
  5. Innovative Methods to Determine Thermal Capacity of Remaining Fuel Quantity Heat Sink in Real Time

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: N103200

    PCKA has developed a dynamic, real-time thermal capacity algorithm and gauge for predicting current and anticipated fuel heat sink capability on a fifth-generation tactical aircraft. Relevant internal and external sources and sinks are tracked with prognostics and adaptive intelligence designed to anticipate future thermal constraints. Net heat transfer, available range, and time until potential t ...

    SBIR Phase II 2013 Department of DefenseNavy
  6. Advanced Gas Turbine Engine Exhaust Waste Heat Recovery System

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N103229

    Navy ships use of gas turbine engines for both main propulsion and shipboard electrical power generation. With a typical simple cycle gas turbine nearly 65% of the energy consumed is typically lost as waste heat. Safely and efficiently recovering electrical power from this source of energy equal to an amount of power to provide a 20% reduction in fuel consumption is the program goal. Also importan ...

    SBIR Phase II 2013 Department of DefenseNavy
  7. Advanced Bearing and Gear Steel Materials and Thermal Processing

    SBC: IBC Materials & Technologies, LLC            Topic: N112107

    Operation of turbine engines in marine environments presents a great challenge for bearings and gears composed of Pyrowear 675. The harsh environment reduces bearing life and increases unscheduled maintenance. IBC Materials is developing an industrial-scale, novel thermal process utilizing a unique atmosphere and innovative heat treat process. Using this approach, IBC will significantly improve th ...

    SBIR Phase II 2013 Department of DefenseNavy
  8. Stochastic Reliability Metrics for Damage Characterization Based on Parametric and Voxel-Based Estimation Algorithms

    SBC: VICTOR TECHNOLOGIES LLC            Topic: AF112130

    ABSTRACT: To achieve the objectives of condition-based maintenance plus prognosis (CBM+), and realize its potential, the location and size of damage at any length scale, e.g., either a crack or a microstructural perturbation, needs to be determined with statistical metrics to feed prognostic reasoners and risk assessments. Previous work by Victor Technologies has focused on developing estimation ...

    SBIR Phase II 2013 Department of DefenseAir Force
  9. Spectral LES/FMDF for Simulation of Turbulent Combustion Interaction in High Speed Flow on Unstructured Grids

    SBC: Enabling Energy Systems            Topic: OSD10T001

    The focus of this project is on large-eddy simulation (LES) of high-speed turbulent reacting flows. The Enabling Energy Systems (EES) Inc. has assembled a well-experienced team of experts to tackle all the main issues involved in modeling of such complex flows. Several innovative ideas have been proposed and team members have complementary expertise. The ultimate goal of the project is to develop ...

    STTR Phase II 2012 Department of DefenseAir Force
  10. AlInN/GaN HFET over Free-Standing bulk GaN substrates

    SBC: Sensor Electronic Technology, Inc.            Topic: MDA09T001

    This proposed research for Phase II consideration involves the growth of AlInN/GaN heterostructure field effect transistors (HFET) on bulk GaN substrates. By combining a homoepitaxial substrate for the growth of the heterostructures with the lattice-matching ability of the AlInN alloy, it is expected that the defect density in the eventual HFETs can be reduced significantally, ultimately improvin ...

    STTR Phase II 2012 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government