You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Portable, Omnidirectional Retroreflector Testing System

    SBC: Physical Optics Corporation            Topic: AF171002

    To address the Air Forces need for a wide-angle retroreflectometer, Physical Optics Corporation (POC) proposes to continue advancing, in Phase II, the new Portable, Omnidirectional Retroreflector Testing (PORT) system. Successfully developed and proven feasible in Phase I, the PORT system utilizes an advanced optical system to enable surface testing at an arbitrary angle of incidence. The same sys ...

    SBIR Phase II 2018 Department of DefenseAir Force
  2. Remote Device/Person Authentication Security System

    SBC: Physical Optics Corporation            Topic: AF171037

    To address the Air Force need for a Mission Assured Authentication (MAA) solution for authenticating the identity of a distant end communicator (person/device), Physical Optics Corporation (POC) proposes to advance development of the new Remote Device/Person Authentication Security (REDPAS) system, which was proven feasible in Phase I. The REDPAS enables person/device authentication by using weara ...

    SBIR Phase II 2018 Department of DefenseAir Force
  3. Heuristic and Node Dynamic Sharing Technologies for Airborne Network Data

    SBC: Physical Optics Corporation            Topic: AF171039

    To address the Air Forces need for data storage and sharing technologies, Physical Optics Corporation (POC) has designed new Heuristic And Node Dynamic Sharing Technologies for Aerial Network Data (HANDSTAND) and implemented a proof-of-concept prototype during Phase I. HANDSTAND ensures data availability by incorporating storage redundancy, which enables replication of data on aerial network platf ...

    SBIR Phase II 2018 Department of DefenseAir Force
  4. Warhead High-Energy Computerized Tomography System

    SBC: Physical Optics Corporation            Topic: AF171086

    To address the Air Force need for improvement of existing munition X-ray facilities to perform computed tomography, Physical Optics Corporation (POC) proposed and successfully completed design and development of the new Warhead High-Energy Computerized Tomography (WARHECT) system for extension of the capabilities of existing Air Force conventional high-energy X-ray radiography facilities (with a p ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Modeling with Augmented SysML to Track Evaluable Requirements for SoS (MASTERS)

    SBC: STOTTLER HENKE ASSOCIATES INC            Topic: AF171114

    The Air Force frequently integrates complex new systems, such as innovative sensors, into larger systems of systems (SoS), such as aircraft platforms.Increasing system complexity can cause late discovery of integration issues that delay project completion and inflate costs.We propose to develop a system for Modeling with Augmented SysML to Track Evaluable Requirements for SoS (MASTERS). MASTERS wi ...

    SBIR Phase II 2018 Department of DefenseAir Force
  6. Validation of Low Hydrogen Embrittlement (LHE) Alkaline Zinc Nickel Electroplating for Steel and Aluminum Electrical Connectors, Back-Shells and Components

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC            Topic: AF161007

    Many of the US Department of Defense (DOD) electrical connectors, back-shells and components currently contain cadmium (Cd).Cadmium is a known carcinogen.Furthermore, the cadmium is typically conversion coated with a hex-chromate which is also hazardous.Both the cadmium plating process and its subsequent conversion coating have been proven to be toxic (unlike other processes such as chromium plati ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Development of Cad Plating Replacement with Zinc Nickel on High Strength Steel Components

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC            Topic: AF071320

    In 2010, ES3/USAF qualified LHE Zn-Ni electroplating process to replace cadmium plating on Landing Gear components. Hill AFB implemented an LHE Zn-Ni plating line in 2013 to replace all cadmium plated components with follow-on plans to terminate all cadmium plating. The F-16 has many components that are coated with cadmiuma known carcinogen. The F-16 Program office has identified the wing attachme ...

    SBIR Phase II 2018 Department of DefenseAir Force
  8. Dimensional Restoration of Aircraft Components Damaged by Corrosion

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC            Topic: AF131190

    The U.S. Air Force (USAF) typically requires restoration of damaged aircraft components. These aircraft structure and components are typically manufactured from aluminum substrates, as well as other alloys like magnesium, titanium, and low alloy, PH and Cres steels.Current repair techniques will inspect, clean, and then apply Corrosion Preventative Compounds to prevent/reduce corrosion.Additionall ...

    SBIR Phase II 2018 Department of DefenseAir Force
  9. Munition Effectiveness Modeling and Technology Integration Research

    SBC: ACTA, LLC            Topic: N/A

    A 24-month Phase II project is proposed to develop and implement models that capture the fidelity of high fidelity physics-based (HFPB) models in a fast-running format. It is anticipated that such models will be incorporated in certain modules of theModular Effectiveness/Vulnerability Assessment (MEVA) code developed for and currently used by the Air Force for assessing munitions effectiveness an ...

    SBIR Phase II 2001 Department of DefenseAir Force
  10. Extraction of Rocket Propellant Physical Properties Via Computed Tomography

    SBC: Aracor            Topic: N/A

    The objective of this SBIR project is to develop enhanced capabilities to evaluate solid rocket motors (SRMs) using x-ray computed tomography (CT) inspection. In Phase I, approaches were defined for developing technology to improve CT inspectioncapabilities. In Phase II, the technology will be developed and incorporated in practical tools to be delivered to OO-ALC at Hill AFB, where Air Force mi ...

    SBIR Phase II 2001 Department of DefenseAir Force
US Flag An Official Website of the United States Government