You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Efficiency Computation of High Reynolds Number Flows

    SBC: Technosoft, Inc            Topic: N13AT009

    Although advancements in CFD technology and high performance computing have proven to be effective and reasonably accurate in assessing the hydrodynamic performance of naval vessels, the effort required to develop associated analysis models remains a challenging and time consuming task. Decomposing and manipulating the design geometry for mesh construction, while capturing near-field and far-field ...

    STTR Phase I 2013 Department of DefenseNavy
  2. Conformal Array Laser Imager for Bondline Evaluation&Repair (CALIBER)

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N13AT011

    The NAVY solicits new non-destructive inspection (NDI) methods to address detection and evaluation of kissing bonds and bondline integrity in aerospace composites since no currently accepted standard exists. In response AS & T Inc. propose, the Conformal Array Laser Imager for Bondline Evaluation and Repair (CALIBER), designed expressly for this purpose. The novelty of the proposed approach lies i ...

    STTR Phase I 2013 Department of DefenseNavy
  3. Integrally Bladed Rotor (IBR) Blend Optimization Tool

    SBC: M4 ENGINEERING, INC.            Topic: N13AT002

    M4 Engineering and UCLA propose to develop software for rapidly and accurately assessing the impact of blend repairs on bladed disk structures. Reduced order modeling techniques will be employed to efficiently simulate modal responses and parametric models of blend repairs will be generated. This approach will be coupled with an optimization scheme for determining optimal blend geometry with minim ...

    STTR Phase I 2013 Department of DefenseNavy
  4. High Efficiency Computation of High Reynolds Number Flows via Anisotropic Adaptive Mesh Refinement

    SBC: CMSOFT, INC.            Topic: N13AT009

    This STTR Phase I project aims to design, implement, and demonstrate a rigorous, practical, fast, and re-usable anisotropic mesh adaptation software module for enabling the efficient computation of high Reynolds number flows in large computational domains. To this effect, it focuses on developing: (a) a set of portable and cache-friendly dynamic data structures that ease the implementation in a hy ...

    STTR Phase I 2013 Department of DefenseNavy
  5. Interlaminar Mode I and Mode II Fracture Toughnesses in Ceramic Matrix Composites (CMCs)

    SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC            Topic: N13AT008

    Ceramic Matrix Composite (CMC)'s are highly susceptible to interlaminar shear failure at elevated temperatures. Therefore, interlaminar properties, critical design limitation of CMC should be assessed accurately with appropriate test methods to ensure overall structural reliability/integrity of components in Naval gas turbine engines. AlphaSTAR proposes to develop rigorous, precise, and innov ...

    STTR Phase I 2013 Department of DefenseNavy
  6. Maneuver Prediction and Avoidance Logic For Unmanned Aircraft System Encounters with Non-Cooperative Air Traffic

    SBC: NUMERICA CORPORATION            Topic: N13AT003

    For Unmanned Aircraft Systems (UAS) to operate seamlessly in both the U.S. National Airspace System (NAS) and abroad, it will be crucial that they possess a sense-and-avoid (SAA) capability that can ensure safe operations among maneuvering, non-cooperative aircraft. Numerica Corporation, in partnership with Johns Hopkins University, proposes to develop a set of algorithms to model the uncertaintie ...

    STTR Phase I 2013 Department of DefenseNavy
  7. 100GBit/s Low Drive voltage Multi-Quantum Well Nanowire modulator

    SBC: FREEDOM PHOTONICS LLC            Topic: N13AT005

    In this Phase I Small Business Innovative Research project we will be developing extremely efficient (

    STTR Phase I 2013 Department of DefenseNavy
  8. Compact robust testbed for cold-atom clock and sensor applications

    SBC: COLDQUANTA, INC.            Topic: N13AT018

    As strontium and other alkaline-earth metals become increasingly attractive for ultracold-atom applications, there is a growing need to develop compact, robust systems for cooling, trapping, and studying these elements. In this proposal, ColdQuanta will team with Dr. Jun Ye at JILA and the University of Colorado at Boulder to develop a portable, turn-key system that can produce, utilize, and optic ...

    STTR Phase I 2013 Department of DefenseNavy
  9. Solid-State Fundamental Mode Green Laser for Ocean Mine Detection

    SBC: ARETE ASSOCIATES            Topic: N13AT023

    Arete proposes the development of Q-switched semiconductor lasers that can be scaled to produce high output peak powers within the blue/green wavelength band. The proposed system will utilize nanostructure quantum wavefunction engineering for gain material designs having extended excited state lifetimes and suppressed non-radiative processes to enable energy storage for high-peak-power optical pul ...

    STTR Phase I 2013 Department of DefenseNavy
  10. Mechanical Property Characterization and Modeling for Structural Mo-Si-B Alloys for High Temperature Applications

    SBC: Imaging Systems Technology, Inc.            Topic: N13AT012

    Under this STTR, Imaging Systems Technology (IST) in cooperation with Georgia Institute Technology (GIT) will develop and mature models to predict mechanical properties of refractory alloys with an eye toward tailoring these alloys for specific applications. In particular, this research will focus on addressing core aspects of Integrated Computational Materials Engineering (ICME) as it applies to ...

    STTR Phase I 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government