You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Enhanced Riverine Drifter

    SBC: Oceanscience Group            Topic: N10AT024

    Existing riverine drifters are passive devices designed to capture, store and transmit river flow and bathymetry information. Problems inherent with passively drifting devices include the inability to maintain uniform cross-stream spatial coverage and lost drifters due to unintentional grounding and entanglement with various hazards present in a typical river environment. This proposal outlines a ...

    STTR Phase I 2010 Department of DefenseNavy
  2. Advanced Materials for the Design of Lightweight JP5/JP8/DS2 Fueled Engines for Unmanned Aerial Vehicles (UAVs)

    SBC: Northwest Uld, Inc.            Topic: N10AT001

    Northwest UAV Propulsion Systems proposes using our purpose built heavy fuel engine designed and built in the USA for small unmanned aerial systems in the tier 2 & 3 class. We will be adding a lightweight ceramic material set combined with FEA (Finite Element Analysis) and heavy fuel atomizer (IRAD Project) to create a lightweight engine for a SUAS or STUAS class UAVs. The Ceramic material set is ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Autonomous Landing at Unprepared Sites for a Cargo Unmanned Air System

    SBC: Data Flux Systems Inc.            Topic: N10AT039

    We propose to design, develop, implement, simulate, and demonstrate an autonomous control and sensing system for the safe vertical landing of autonomous aerial cargo delivery system (ACDS). The landing site is expected to be unprepared mountain sides with slopes up to 15 degrees and rough terrain containing rocks and brush. We also plan to reduce the amount of ground equipment required to operate ...

    STTR Phase I 2010 Department of DefenseNavy
  4. High Efficiency Computation of High Reynolds Number Flows via Anisotropic Adaptive Mesh Refinement

    SBC: CMSOFT, INC.            Topic: N13AT009

    This STTR Phase I project aims to design, implement, and demonstrate a rigorous, practical, fast, and re-usable anisotropic mesh adaptation software module for enabling the efficient computation of high Reynolds number flows in large computational domains. To this effect, it focuses on developing: (a) a set of portable and cache-friendly dynamic data structures that ease the implementation in a hy ...

    STTR Phase I 2013 Department of DefenseNavy
  5. High Efficiency Computation of High Reynolds Number Flows

    SBC: Technosoft, Inc            Topic: N13AT009

    Although advancements in CFD technology and high performance computing have proven to be effective and reasonably accurate in assessing the hydrodynamic performance of naval vessels, the effort required to develop associated analysis models remains a challenging and time consuming task. Decomposing and manipulating the design geometry for mesh construction, while capturing near-field and far-field ...

    STTR Phase I 2013 Department of DefenseNavy
  6. Conformal Array Laser Imager for Bondline Evaluation&Repair (CALIBER)

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N13AT011

    The NAVY solicits new non-destructive inspection (NDI) methods to address detection and evaluation of kissing bonds and bondline integrity in aerospace composites since no currently accepted standard exists. In response AS & T Inc. propose, the Conformal Array Laser Imager for Bondline Evaluation and Repair (CALIBER), designed expressly for this purpose. The novelty of the proposed approach lies i ...

    STTR Phase I 2013 Department of DefenseNavy
  7. Mechanical Property Characterization and Modeling for Structural Mo-Si-B Alloys for High Temperature Applications

    SBC: Imaging Systems Technology, Inc.            Topic: N13AT012

    Under this STTR, Imaging Systems Technology (IST) in cooperation with Georgia Institute Technology (GIT) will develop and mature models to predict mechanical properties of refractory alloys with an eye toward tailoring these alloys for specific applications. In particular, this research will focus on addressing core aspects of Integrated Computational Materials Engineering (ICME) as it applies to ...

    STTR Phase I 2013 Department of DefenseNavy
  8. Mechanical Property Characterization and Modeling for Structural Mo-Si-B Alloys for High Temperature Applications

    SBC: Deep Springs Technology            Topic: N13AT012

    The objective of the work described in this proposal is to aid in the advancement of Mo-Si-B alloys for use in high temperature applications such as hot gas stream components in turbine engines. Such alloys are being characterized for their monotonic tensile properties in tension and compression as well for their creep resistance. Likewise, multiphase Mo-Si-B alloys have been studied in terms of m ...

    STTR Phase I 2013 Department of DefenseNavy
  9. Progressive Model Generation for Adaptive Resilient System Software

    SBC: SECURBORATION, INC.            Topic: N13AT014

    Complex software systems are typically developed by disparate engineering teams working concurrently. At the same time, software requirements are frequently dynamic, evolving even during active development cycles. Discrepancies between how software is defined and how it is implemented at the modular level can cascade into critical system errors when modules are integrated. More troubling is that i ...

    STTR Phase I 2013 Department of DefenseNavy
  10. Compact robust testbed for cold-atom clock and sensor applications

    SBC: COLDQUANTA, INC.            Topic: N13AT018

    As strontium and other alkaline-earth metals become increasingly attractive for ultracold-atom applications, there is a growing need to develop compact, robust systems for cooling, trapping, and studying these elements. In this proposal, ColdQuanta will team with Dr. Jun Ye at JILA and the University of Colorado at Boulder to develop a portable, turn-key system that can produce, utilize, and optic ...

    STTR Phase I 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government