You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: PHYSICAL SCIENCES INC. Topic: A12aT026
The Army desires carbon nanotube (CNT) based fibers with exceptional strength and stiffness to provide high performance composite materials. Physical Sciences Inc. (PSI) has demonstrated a method to fabricate continuous CNT from electrospun polymer nanofibers. Because these CNT are continuous, their mechanical strength is limited primarily to their defect population. During a Phase I program PSI w ...STTR Phase I 2013 Department of DefenseArmy
SBC: TDA RESEARCH, INC. Topic: A13AT019
Approximately 5-6% of military injuries involve some form of major peripheral nerve injury with little chance of spontaneous healing. Currently these injuries lead to major impairment of voluntary muscle function in the limbs and extremities, making tasks of walking, reaching, grasping, etc. very difficult or impossible for many patients. It is not enough to focus therapeutic treatment on the se ...STTR Phase I 2013 Department of DefenseArmy
SBC: UES INC Topic: OSD12T07
Cemented cobalt-tungsten carbide is a material with attractive properties including high hardness and fracture toughness that has found success in a wide variety of applications ranging from drilling bits to armor piercing projectiles. However, with the classification of cobalt as a strategic and critical material that the US Department of Health and Human Services has classified as"reasonably ant ...STTR Phase I 2013 Department of DefenseArmy
SBC: BOSTON APPLIED TECHNOLOGIES, INCORPORATED Topic: A11aT018
Microwave technologies have found a broad range of and growing applications, especially in the area of communications. Many microwave tunable devices are bulky and incompatible with RF semiconductor IC technology. The slow tuning response speeds, high material losses, and device noise at higher frequencies have also limited their widespread applications.Recent advances in processing complex oxide ...STTR Phase II 2013 Department of DefenseArmy
SBC: Fulcrum Bioscience, LLC Topic: A13AT007
The synthesis of ammonia through nitrogen fixation is a vital component to all plant life and the world economy as a fertilizer and commodity chemical. The global industial production of ammonia exceeded 140MM tons in 2009 and is expected to grow to 160MM tons by 2020. Most ammonia,>90% is synthesized through the Haber-Bosch processThe Haber-Bosch process produces more than 90% of the industrial ...STTR Phase I 2013 Department of DefenseArmy
SBC: Sciperio, Inc. Topic: A13AT010
Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...STTR Phase I 2013 Department of DefenseArmy
SBC: RADIATION MONITORING DEVICES, INC. Topic: A13AT013
The goal of the proposed program is to identify an effective passivation material and develop a capable passivation methodology to protect highly reticulated HgCdTe surfaces. The proposed passivation material and technique using highly conformal atomic layer deposition (ALD) will allow the DOD to develop high-performance infrared focal plane array detectors that can operate under wider operating c ...STTR Phase I 2013 Department of DefenseArmy
SBC: NexGen Composites LLC Topic: A13AT021
There is a great need and opportunity to develop lower cost manufacturing process for ceramic tile-based composite armor system for military tactical vehicles. The threat levels encountered by the military tactical vehicles, particularly due to the Improvised Explosive Devices (IED) pose an ever-increasing need for more lightweight and effective vehicle armor system at an affordable cost. A low-co ...STTR Phase I 2013 Department of DefenseArmy
SBC: Intelligent Automation, Inc. Topic: OSD12T08
The Department of Defense and owners of large, commercial enterprise networks need excellent tools and well trained personnel to enforce cyber-security and counter cyber-attacks. This proposal focuses on supporting security personnel to have great Situational Awareness and training to help them use next generation cyber-security tools. In collaboration with University of Utah researchers with expe ...STTR Phase I 2013 Department of DefenseArmy
SBC: LYNNTECH INC. Topic: A11aT013
Methanol crossover of commercial Nafion membranes is a major issue that results in lowering of the efficiency of direct methanol fuel cells (DMFCs). A biomimetic approach for the membrane design using either proton conducting nanochannels and/or nanothin barrier layer can produce DMFC membranes with highly selective and fast proton transfer. In the Phase I project, Lynntech demonstrated the feasib ...STTR Phase II 2013 Department of DefenseArmy