Award Data

This joint STTR research effort between HJ Science & Technology and the University of Texas at San Antonio seeks to establish a highly integrated mobile "lab-on-a-chip" platform – next generation "lab-on-a-robot" (LOAR) - capable of in-situ, high throughput, and simultaneous identification and characterization of universal classes of ions, molecules, and biomolecules for NASA in-situ planetary co ...

Thermal Stir Welding (TSW) provides advancement over the more conventional Friction Stir Welding (C-FSW) process because it separates the primary processes variables thereby allowing independent control of metal stirring and forging from the stir zone temperature. However, the feedback for precise control of the stir zone temperature, and hence the process parameters to sustain that temperature wi ...

A spacecraft thermal control system must keep the vehicle, avionics and atmosphere (if crewed) within a defined temperature range. Since water is non-toxic and good for heat transport, it is typically used as the coolant that circulates within the crew cabin boundary. This loop then interfaces with another low freeze point fluid, such as ammonia, for transport of heat to a radiator where the tempe ...

The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...

The proposed innovation is an aircraft flight envelope monitoring system that will provide real-time in-cockpit estimations of aircraft flight envelope boundaries. The adaptable system will provide information on current and predicted aircraft performance and controllability, alerting the pilot to any aerodynamic degradation of the aircraft control surfaces. This includes heavy rain, in-flight i ...

The proposed innovation is to use the refrigerant capabilities of nitrous oxide (N2O) to provide the cooling required for reusable operation of an aerospike nozzle in conjunction with an N2O-HTPB (hydroxyl-terminated polybutadiene, a synthetic rubber that is used as a binder in solid rocket motors and as a fuel in hybrid rocket motors) hybrid rocket motor. The phase change cooling as liquid N2O i ...

IFOS and its research institute collaborator, Washington State University (WSU), have demonstrated feasibility of a structural health monitoring (SHM) system for aerospace vehicles such as Unmanned Aerial Vehicles (UAVs) or commercial airliners. In Phase 1, a unique high-speed, high-channel count fiber Bragg grating (FBG) sensor interrogation system enabling a new Lamb wave-based damage detection ...

Current modeling of Lunar and Martian soil erosion and debris transport caused by rocket plume impingement lacks essential physics from the peculiar granular characteristics of highly irregular regolith particles. Current granular mechanics models are based on mono-disperse spherical particles empiricism unsuitable for capturing the poly-disperse irregularly shaped grain mechanics. CFDRC and the U ...

Currently used cathode materials in energy storage devices do not fully satisfy the power density and energy density requirements for NASA's exploration missions. Working in collaboration with our STTR partner at University of California – San Diego, we propose to develop layered-layered composite cathode materials that offer superior performance over commercially available positive electrode mat ...

The Keystone and MSU team propose to build on the successful feasibility demonstration conducted during Phase I to complete the development of solid-state joining of high strength and temperature alloys utilizing the Thermal Stir Welding process. The focus alloy for this project is Haynes 230; the alloy of choice typically utilized in rocket engine nozzel skirts. This class of alloy is difficult t ...