You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. RH Electronic Components (1394B's LLC & PHY)

    SBC: Silicon Space Technology Corporation            Topic: MDA06042

    Silicon Space Technology (SST) demonstrated during Phase I that astute modifications to a commercial CMOS process can yield significant improvement to a Texas Instruments (TI) 1394B FireWire circuit's radiation hardness. SST developed a practical approach for Harden By Isolation (HBI) integration into an existing TI 1394B IC product (180nm TSB82AA2 Link Layer Controller [LLC]). The resulting con ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  2. RH Electronic Components (DSP's VC33 & C6727B)

    SBC: Silicon Space Technology Corporation            Topic: MDA06042

    Silicon Space Technology (SST) demonstrated during Phase I that astute modifications to a commercial CMOS process can yield significant improvement to Texas Instruments (TI) DSP circuits' radiation hardness. SST developed a practical approach for Harden By Isolation (HBI) integration into two existing TI DSP IC products (250nm VC33 and 180nm C2812). The resulting conclusion is that SST's HBI app ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  3. Sensor Data Fusion: Multi-Static Space Object Imaging

    SBC: STIEFVATER CONSULTANTS            Topic: MDA06010

    The goal of this project is to develop, evaluate and demonstrate sensor fusion algorithms for target imaging/discrimination. These algorithms will require data from multiple radars viewing the object from different angles. These radars may operate in different frequency bands (X-band, C-band, S-band, L-band). The algorithms will consider the coherent processing of multiple mono-static radars and ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  4. Expedited Transition of Propulsion Modeling & Simulation Capability

    SBC: Strategic Insight, Ltd.            Topic: MDA07T009

    A multivariate interface/data structure for insensitive munitions (IM) applications, technology and hazards/effects analysis can facilitate transition of propulsion modeling and simulation (M&S) capability. Expected benefits are reduced testing and overall acquisition cost and increased safety margins. Use of M&S can provide knowledge points not achievable with limited pass-fail testing. During Ph ...

    STTR Phase II 2008 Department of DefenseMissile Defense Agency
  5. Mitigating Lead-Free Issues in Electronic Circuit Board Manufacturing and Repair

    SBC: SUNDEW TECHNOLOGIES LLC            Topic: MDA07027

    The objective of this SBIR Phase I project is to demonstrate consistent and significant mitigation of tin whiskers growth and associated electronic circuit failure. Atomic Layer Deposition encapsulating films (ALD-Cap) are flexible ceramic films, with exceptional conformality, adherence and mechanical strength. Developed primarily as a low-cost environmental protection and corrosion barrier, ALD-C ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  6. Modular Adaptive Low-cost Test System (MALTS)

    SBC: Systems & Processes Engineering Corporation            Topic: MDA07006

    Systems & Processes Engineering Corporation (SPEC) proposes the low-risk adaptation of existing flight-proven MDA Targets & Countermeasures (TC) subsystems to meet the requirements of this topic. In an increasingly tight budgetary environment, the frequent calibration testing needed by new, modified and operational sensors must be accomplished in a much more cost and schedule efficient manner. SPE ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  7. Aerodynamic Characteristics of Irregularly Shaped Intercept Fragments

    SBC: Technology In Blacksburg Inc            Topic: MDA07016

    Techsburg, Inc. proposes to leverage our expertise in computational fluid dynamics (CFD) and wind tunnel testing to numerically predict the lift and drag characteristics of irregularly-shaped intercept fragments and experimentally validate a subset of the results using our in-house supersonic wind tunnel facility. We will apply 3D laser scanning technology to digitize the geometry of sponsor-supp ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  8. Innovative Manufacturing Technologies for Low Cost, High Reliability Electronic Packaging

    SBC: TEMEKU TECHNOLOGIES, INC.            Topic: MDA07025

    The Missile Defense Agency (MDA) is seeking new and innovative designs for improved large surfaced based Active Electronically Scanned Arrays (AESA) with high power efficiencies, increased functionality, and more efficient cooling systems. It is anticipated that AESA cooling systems must be capable of managing heat loads ranging from 3-8 kW/ft² (32-86 kW/m²). The Subambient Cooling System (SA ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  9. High Temperature Propulsion Components for Advanced Solid DACS by Combustion Driven Powder Compaction (CDC) Technology

    SBC: UTRON, Inc.            Topic: MDA06027

    The proposed Phase II work is mainly focused on further continuing and developing Composite Alloys of W-25Re, Mo-Re, with Ta, Hf, HfC, and TaC for the application development of higher thrust-high temperature (e.g., TDACS FEDS) Large Thrust Pintles with potential weight reduction by suitable alloying and functional layering for advanced Solid DACS systems using UTRON’s 300, 400 or 1000 Ton CDC P ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  10. Near Net Shape Manufacturing of Actuator Components by Rapid Combustion Driven Powder Consolidation Technology

    SBC: UTRON, Inc.            Topic: MDA07024

    In response to MDA's need for fabricating actuator components for DACS and other systems, UTRON proposes an innovative manufacturing technology called the high pressure Combustion Driven Powder Compaction (CDC) to manufacture near net shape quality actuator system components such as gears with improved densification, mechanical and microstructural attributes. The actuator gear system components ar ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government