List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

Displaying 41 - 50 of 20779 results
  1. CMOS Compatible Deposition of Multi-Ferroic Films for Tunable Microwave Applications

    SBC: Winchester Technologies, LLC            Topic: A17019

    Built upon the progress in Phase I period, Winchester Technologies, LLC proposes to investigate practical magnetoelectric antennas during the Phase II period for different applications. State of the art antennas suffer from three major open challenges: (1) large antenna size, (2) antenna impedance mismatch; (3) ground plane effect. This is because state of the art antennas are based on oscillating ...

    SBIR Phase II 2019 Department of DefenseArmy
  2. Development of a Stochastic Multi-dimensional Fire Modeling and Simulation Software Package

    SBC: ADA Technologies, Inc.            Topic: A17073

    Fire can act extremely quickly in military shelters. Improving fire safety begins with understanding the fire dynamics associated with each system. All current shelters are evaluated for fire safety on a component basis only; there are no specifications for how the overall system design relates to generation of flame, heat, and smoke. As such, the Army needs a three-dimensional, reliable and valid ...

    SBIR Phase II 2019 Department of DefenseArmy
  3. Protective CMAS Coatings for SiC CMCs

    SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC.            Topic: A17030

    Graded rare earth hafnia multilayer coatings with three different top layer compositions will be deposited on SiC CMC and alumina substrates, characterized by XRD, SEM and EDS, and subjectedtoflowing air-steam at 50% relative humidity without and with CMAS in both isothermal and thermal cycling conditions.Post test analyses include weight change, SEM microstructure characterization changes, XRD/ED ...

    SBIR Phase II 2019 Department of DefenseArmy
  4. TW Mid-Infrared Laser

    SBC: POLARONYX, INC.            Topic: A17042

    Based on our success in developing several the worlds first commercial high energy femtosecond fiber laser system and OPA systems, PolarOnyx propose, for the first time, a compact fiber laser pumped high energy mid-wave infrared laser to meet with the requirement of the Army solicitation A17-042. The laser is a hybrid fiber/solid state laser based MOPA incorporating our proprietary technology of p ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. UHF L-band Transmitter Receiver Antenna (ULTRA)

    SBC: First RF Corporation            Topic: A17040

    The Department of Defense depends on multiple systems to establish and update position information of our forces on the battlefield. However, the current interfacing capability for position location information (PLI) systems is limited to a select few service providers. By adding flexibility to the RF media interface for these systems, new levels of connectedness and reliability can be achieved, p ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. Lightweight, Durable, Low-Cost Recuperators Designed for Integration with Small Turbo-generators for Future Army Unmanned Aerial Systems

    SBC: Florida Turbine Technologies Inc.            Topic: A17001

    FTT proposes to design, build, and test an advanced light-weight, low-cost, and durable additively manufactured recuperator.Testing will be first performed in a component rig with similar engine conditions to increase TRL to 5.Following successful completion of the component rig, FTT will mate the recuperator up with a 5KW turbogenerator and run the assembly at FTT Small Engine Test Facility in or ...

    SBIR Phase II 2019 Department of DefenseArmy
  7. Vascularized Tissue Construction Using Specialized 3D Bioprinting Techniques

    SBC: Lynntech Inc.            Topic: A17068

    Tissue engineering technology is of particular import to the Army for the matter of producing tissue replacements for the repair and regeneration of various organ systems (liver, heart, muscle, lung, etc.) for wounded patients. Unfortunately, the production of masses of tissue with thicknesses greater than ~1 mm presents a challenge due to diffusion limits of nutrients into the tissue and waste ou ...

    SBIR Phase II 2019 Department of DefenseArmy
  8. Avionics Compositional System of Systems Simulation and Modeling Tool Chain

    SBC: PHYSICAL OPTICS CORPORATION            Topic: A17007

    To address the Armys need for a simulation and verification framework for future vertical lift (FVL) aircraft systems, Physical Optics Corporation (POC) developed and demonstrated a preliminary prototype of an Avionics Compositional System of Systems (SoS) Simulation and Modeling Tool Chain (ASSIST) in Phase I. ASSIST includes software to parse avionics specifications; automatically generate missi ...

    SBIR Phase II 2019 Department of DefenseArmy
  9. High-Fidelity Design Tools and Technologies for High-Pressure Heavy Fuel Injectors

    SBC: CASCADE TECHNOLOGIES, INC.            Topic: A17031

    The objectives of the project are to develop and demonstrate a high-fidelity simulation tool to predict and optimize high-pressure heavy fuel injectors. During Phase I research, Cascade Technologies developed a multiscale breakup model that resolves the continuous liquid phase using the geometric Volume-of-Fluid method, and models subgrid interfacial structures (ligaments, sheets and drops) by the ...

    SBIR Phase II 2019 Department of DefenseArmy
  10. Lithium Ion Battery Electrodes Manufacturing to Improve Power and Energy Performance

    SBC: Navitas Advanced Solutions Group, LLC            Topic: A17020

    Navitas proposes a novel approach to produce high energy, high power lithium batteries.Our innovative approach produces multilayer electrodes with gradient pore structure throughout the thickness of the electrode. Phase I results showed that the graded electrode structure enhanced lithium ion transport. The innovative electrodes were fabricated using water-based coating process. Phase I individual ...

    SBIR Phase II 2019 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government