You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Analysis of Remote Fire Detection Using Microwave/Millimeter Wave

    SBC: WaveBand Corporation            Topic: N/A

    Lack of reliable fire warning and detection systems for urban/wildland interface, large area industrial facilities and transportation systems results each year in a loss of millions of dollars worth of property; it also endangers lives. Typical optical fire detection sensors do not work well under frequently encountered adverse atmospheric conditions and, in addition, are incapable of covering siz ...

    SBIR Phase I 1997 Department of Commerce
  2. Autofratage Composite Design

    SBC: WILSON COMPOSITE TECHNOLOGIES            Topic: N/A

    This project wil address the design and manufacture of a composite overwrapped tank with a thin metal liner, compatible with the requirements for containment of ultra-high purity gases. The complete tank design will be subjected to a Finite Element Analysis to provide a tank which will operate safely within the prescribed pressure limits of 200 bar (3000 psi) working pressure and 600 bar (9000 ps ...

    SBIR Phase II 1997 Department of Commerce
  3. Composite Preburner & Turbopump Housing Materials and Process

    SBC: WILSON COMPOSITE TECHNOLOGIES            Topic: N/A

    Composite technology exists for application to cryogenic fluid storage without an interface liner. This technology is being applied to an LH2 storage pressure vessel under Air Force Contract F29601-C-0217. This proposal outlines a program to transfer the LH2 composite technology to liquid rocket engine components. This proposal will address requirements for feed system assemblies, such as prebu ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Development of an optical patternator for the rapid, accurate, and reliable measurement of liquid spray temporal and spatial mass distribution and siz

    SBC: Energy Research Consultants            Topic: N/A

    In many engineering applications, the spatial and temporal distribution of a liquid spray is a determining factor in the system performance. In addition, the size of the droplets produced by the atomization process can also play a significant role. As a result, an instrument is highly desirable for a myriad of applications that provides rapid, accurate, and reliable (1) spatial and temporal dist ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  5. SMART SENSORS USING OPTICAL FIBER INTERCONNECTS AND DISTRIBUTED MEMS

    SBC: Luna Innovations Incorporated            Topic: N/A

    This SBIR program would develop practical methods for the interconnection, addressing and control of large numbers of distributed MEMS-based sensing and actuation elements using optical fiber multiplexing techniques. Such interconnected sensor/actuator arrays have immediate and long-term applications in the instrumentation and control of adaptive aircraft, spacecraft and hydrocraft structures, fl ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  6. Optical Fiber-Based Corrosion System Using Electrochemically Active Coatings

    SBC: Luna Innovations Incorporated            Topic: N/A

    The objective of the proposed program is to address the high service costs of the current U.S. Navy fleet of aircraft by developing a distributed optical fiber sensor system that will help reduce the costs associated with corrosion damage and extend the lifetime of existing aircraft. Annual corrosion of Navy metallic structures has been estimated as high as $1 billion. Additional costs aris ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, Inc            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Validation and security verification using a holographic phase mask correlator

    SBC: Accuwave Corp.            Topic: N/A

    Accuwave Corporation will study the feasibility of a volume holographic, phase-encoded optical image correlator for credit card and document validation and security application. Fourier transform holograms of a phase-encoded input image are stored using wavelength multiplexed holographic gratings in a photorefractive crystal. High spatial resolution images can be sotred with low crosstalk using ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. Rotorcraft Model Enhancements to Support Land and Sea-Based Testing and Operational Analysis

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N/A

    We Propose to enhance rotorcraft simulation model to support land and sea-based flight testing and operational analysis. The model enhancement will resolve the long-time perplexing problems related to the fundamental simulation requirement for an accurate prediction of rotorcraft response in full range of flight. The solution proposed is to improve the widely used finite state dynamic wake ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  10. Diagnostic Development for Characterizing Fuel Droplet Temperatures in Spray Flames

    SBC: Aerometrics Inc.            Topic: N/A

    Development of efficient spray combustors requires a complete understanding of fundamental phenomena that influence and control the overall spray combustion process. Toward this end, detailed experimental characterization of spray flames is essential. This includes measurement of various fuel droplet parameters such as droplet size, velocity, number density, temperature, composition, and droplet ...

    SBIR Phase II 1996 Department of Commerce
US Flag An Official Website of the United States Government