You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Modeling Spin Test Using Location Specific Material Properties

    SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION            Topic: AF08T013

    Jet engine disk components are increasingly subjected to higher operating temperatures. To meet the demands of increasing thrust and higher operating temperatures, a newer generation of nickel based superalloys such as LSHR, Alloy 10, Rene104 and RR1000 are being processed with dual microstructure distributions. Fine grain, high strength, fatigue resistant bore properties are contrasted with co ...

    STTR Phase II 2010 Department of DefenseAir Force
  2. Gaseous Helium Reclamation at Rocket Test Systems

    SBC: Sierra Lobo, Inc.            Topic: T1001

    The ability to restore large amounts of vented gaseous helium (GHe) at rocket test sites preserves the GHe and reduces operating cost. The used GHe is vented into the atmosphere, is non-recoverable, and costs NASA millions dollars per year. Helium, which is non-renewable and irreplaceable once released into the atmosphere, is continuously consumed by rocket test facilities at NASA centers such a ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. Generation and Adaptive Modification of Anisotropic Meshes

    SBC: SIMMETRIX, INC.            Topic: T801

    The ability to quickly and reliably simulate high-speed flows over a wide range of geometrically complex configurations is critical to many of NASA's missions. Advances in CFD methods and parallel computing have provided NASA the core flow solvers to perform these simulations. However, the ease of use of these flow solvers and the reliability of the results obtained are a strong function of the te ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  4. Contamination-free, Ultra-rapid Reactive Chemical Mechanical Polishing (RCMP) of GaN substrates

    SBC: Sinmat Inc            Topic: MDA09T001

    Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  5. Low Cost, Scalable Manufacturing of Microlens Engineered Substrates (MLES) for Enhanced Light Extraction in OLED Devices

    SBC: Sinmat Inc            Topic: 09b

    Solid state lighting is being promoted as the ultimate lamps of future. Though the internal quantum efficiency of OLED devices is almost 100%, external efficiency is a mere 36% mainly because of poor light out-coupling (~40%) from the device. Improvement in light out-coupling to >70% and further reducing the manufacturing cost will rapidly accelerate the commercialization of the OLED technology. T ...

    STTR Phase I 2010 Department of Energy
  6. Defect Free, Ultra-Rapid Thinning/Polishing of Diamond Crystal Radiator Targets (20??m) for Highly Linearly Polarized Photon Beams

    SBC: Sinmat Inc            Topic: 46e

    The fabrication of high-quality ultra thin (~20 micron) diamond crystals targets for 9 GeV highly polarized photon beams is an outstanding challenge. Current state of the art polishing/thinning techniques are not successful in thinning single crystal diamond to such dimension because of its extreme hardness and chemical inertness. These techniques create significant stresses surface and sub-surfac ...

    STTR Phase I 2010 Department of Energy
  7. ULTRAFAST DIAGNOSTICS FOR NOVEL ENERGETIC MATERIALS IN ROCKET ENGINE ENVIRONMENTS

    SBC: SPECTRAL ENERGIES LLC            Topic: AF08T010

    The objectives of this Phase-II research effort is focused on transitioning noninvasive diagnostic techniques based on ultrafast lasers for characterizing nanoenergetic materials and their performance in rocket engine environments. Through the use of ultrafast laser imaging and spectroscopy, it is possible to isolate and characterize each physical process from initiation through energy release an ...

    STTR Phase II 2010 Department of DefenseAir Force
  8. Advanced Simulation Framework for Design and Analysis of Space Propulsion Systems

    SBC: STREAMLINE NUMERICS INC            Topic: T901

    The innovation proposed here is a high-performance, high-fidelity framework in the computational fluid dynamics (CFD) code called Loci-STREAM to enable accurate, fast and robust simulations of unsteady multiphase flows such as combustion involving liquid-gas phases in liquid rocket injectors and solid-gas phases in solid rocket motors, and cryogenic cavitation in delivery systems of liquid rocket ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  9. Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems

    SBC: STREAMLINE NUMERICS INC            Topic: T901

    The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  10. High Surface Area-to-Volume Ultrathin Dense Membrane for Hydrogen Separation

    SBC: T3 SCIENTIFIC LLC            Topic: 10c

    Providing a reliable, clean and economical energy source is a priority of the US government. The challenge is to use coal, a secured and economical energy source, to produce clean hydrogen fuel to support domestic and global green economy with near-zero emission. Conventional separation technology and even developmental technology do not satisfy all of the requirements for hydrogen production from ...

    STTR Phase I 2010 Department of Energy
US Flag An Official Website of the United States Government