Award Data

Protocols used for communication suffer bloat from a variety of sources, such as support for legacy features or rarely used (and unnecessary) functionality. Traditionally, the Navy subscribes to a blanket adoption of a standard protocol "as is". Unnecessary features are active and can be accessed by both internal and external systems creating security vulnerabilities. PJR Corporation's (PJR's) Pha ...

The Navy is interested in developing hybrid superconducting power transmission cables that would carry at least 5 kA of current and have a current density of at least 35 MA/m2. The cable should be able to carry 30 % of the rated current even when the superconducting cable fails. We propose to develop a hybrid superconducting cable, based on CORC cables, which potentially have a current density of ...

Future power systems on board Navy ships require electrical power in the order of 20 to 80 MW, which currently cant be provided by conventional copper or aluminum power cables. Advanced Conductor Technologies LLC (ACT) has been developing high-temperature superconducting Conductor on Round Core (CORC) power transmission cables, rated at 10 kA per phase, for the Navy that form a potential solution ...

This research will show how data-capable laser communication retro-reflectors integrated with multispectral image processing can provide extreme reliability positioning suitable for full time automatic landing aboard ship of piloted fixed wing aircraft. The positioning system supports the SALRS long-term objective to reduce or eliminate pilot training to perform manual landing aboard ship includin ...

The ability to refuel piloted aircraft in flight is considered a strategic military advantage and has been a critical element of success in nearly every US and NATO military engagement of the jet age. One key asset used to facilitate aerial refueling is PMA-201’s Aerial Refueling Store (ARS), which allows fighters and other store-carrying aircraft to be reconfigured as tankers. The ARS is set to ...

The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...

This Navy STTR Phase I proposal presents an unprecedented NDI tool to support laser additive manufacturing of metal parts by using fiber laser SAW and heterodyne detection. It is the enabling technology for real time characterize the AM parts in terms of temperature, cooling rate, grain structure, and defects. A proof of concept demonstration will be carried out at the end of Phase 1.Prototypes wi ...

This Navy STTR Phase I proposal presents an unprecedented NDI tool to quantify mechanical properties of metal parts made with laser additive manufacturing with material characteristics and process parameters. A fiber laser SAW and heterodyne detection is used with LIBS to study both in-process and post-process for both flat and shaped parts. It is the enabling technology for characterize the AM pa ...

We propose development of a software capability which, based on use of MathSysaccurate and efficient exact-physics computational electromagnetics (CEM) solvers, will enable modeling and optimization of the properties of on-platform pRFID tag/reader antenna systems. Passive Radio Frequency Identification devices (pRFID) mounted on complex rotorcrafts pose challenging modeling problems: since pRFID ...

Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.