You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Rapid Identification of Effects of Defects within Metal Additive Manufacturing (RIED-AM)

    SBC: Intelligent Automation, Inc.            Topic: N18AT013

    Additive manufacturing (AM) bring revolutionary capabilities and is very attractive to various commercial and military applications. However, metal AM often results in components with various defects, which may have decisive impact on their mechanical properties. To address this critical concern of AM quality, in this research, Intelligent Automation, Inc (IAI) will develop and implement a materia ...

    STTR Phase II 2020 Department of DefenseNavy
  2. Nondestructive Evaluator for Polymer Ablatives (NEPAL)

    SBC: Intelligent Automation, Inc.            Topic: N18AT011

    Materials for thermal protection are required to protect structural components of missile launching systems, space vehicles during the re-entry stage, and solid rocket motors (SRMs). Polymer resins that have high char retention (e.g., phenolic resins) are the most common matrices in the composite materials for rigid thermal protection systems (TPSs) due to their tunable density, lower cost, and hi ...

    STTR Phase II 2020 Department of DefenseNavy
  3. Analysis and Modeling of Erosion in Gas-Turbine Grade Ceramic Matrix Composites (CMCs)

    SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC            Topic: N19BT033

    A significant barrier to the insertion of ceramic matrix composite (CMC) materials into advanced aircraft engines is their inherent lack of toughness under erosion and post erosion. Our team will develop and demonstrate a physics-based model for erosion/post erosion of CMC’s at room and elevated temperatures (RT/ET). The ICME (Integrated Computational Material Engineering) Physics based Multi Sc ...

    STTR Phase I 2020 Department of DefenseNavy
  4. Non-destructive Webbing Strength Indicator

    SBC: TDA RESEARCH, INC.            Topic: N19BT032

    Webbing is strong, woven material that is used to secure cargo as well as for safety equipment such as seat belts, harnesses, and parachute rigging. Due to its extensive use in Military applications, the strength of the webbing is a key component of equipment design, especially in the case of safety gear that protects soldiers, as lives may be dependent on the strength and proper performance of th ...

    STTR Phase I 2020 Department of DefenseNavy
  5. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
  6. Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling

    SBC: MRV SYSTEMS LLC            Topic: N14AT020

    This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

    STTR Phase II 2016 Department of DefenseNavy
  7. Nonlinear-DSP-Enabled RF-Photonic Link

    SBC: RAM PHOTONICS LLC            Topic: N14AT023

    Digital equalizers have been the major enablers in RF communications in terms of managing component imperfections and channel impairments. Specifically, the ever increasing processing power of the dedicating computing processors has availed a steady increase in the ability of complex communication systems to deal with impairments as well as allowing higher capacities in the information transfer.On ...

    STTR Phase II 2016 Department of DefenseNavy
  8. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  9. Computational Methods for Dynamic Scene Reconstruction

    SBC: ROBOTIC RESEARCH OPCO LLC            Topic: N16AT017

    Reconstruction of dynamic scenes is at the limits of the state of the art. It is still challenging to accurately reconstruct models in static scenes. Dynamic scenes add a list of challenges that further complicate the problem:separating the dynamic objects from the motion created by the camera motionMorphological changes to the dynamic object itself. Not only is the system moving, but it is actual ...

    STTR Phase I 2016 Department of DefenseNavy
  10. 3D Acoustic Model for Geometrically Constrained Environments

    SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC.            Topic: N16AT018

    Systems that operate in constrained environments depend on the acoustics in several ways. Harbor defense systems detect intruders (people and/or vessels) by either listening for their noises (passively) or by pinging on them and detecting their echoes (actively). Furthermore, such systems may also form the equivalent of an underwater cell phone network using sound to carry the information. The aco ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government