You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High-Capacity Sorbent for Removal of Mercury from Flue Gas

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    In December 2000, EPA announced its intent to regulate the emission of mercury from coal-fired power plants. ADA Technologies, Inc., is developing a family of new disposable sorbents for this application. The sorbents consist of a natural silicate doped with chemicals to capture and immobilize vapor-phase mercury and mercury compounds. Laboratory testing in Phase I has shown the new materials to h ...

    SBIR Phase II 2001 Environmental Protection Agency
  2. Robust, Tunable Diode Lasers for Environmental Monitoring

    SBC: VESCENT PHOTONICS LLC            Topic: C3NCERPH

    Tunable diode laser spectroscopy (TDLS) is one of the most versatile and powerful detection technologies. Essentially, any contaminant can be detected, and with emerging cavity-enhanced techniques, sensitivities can be in the parts per trillion. Despite this tremendous potency, however, widespread use of TDLS has been prevented largely by the lack of economical, reliable, and wavelengt ...

    SBIR Phase II 2004 Environmental Protection Agency
  3. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase II 2003 Environmental Protection Agency
  4. Development of a Multianalyte Biosensor Instrument

    SBC: Ergopedia, Inc.            Topic: N/A

    This Phase I project will develop a multianalyte biosensor field screening instrument (MBFI). The MBFI has the potential to reduce the annual cost of environmental analyses in the United States by more than $20 million and to reduce the analysis turnaround time from approximately 19 days to less than 15 minutes. The major barrier to the development of a biosensor instrument for environmental mea ...

    SBIR Phase II 1998 Environmental Protection Agency
  5. N/A

    SBC: ENVIRONMENTAL ELEMENTS CORP.            Topic: N/A

    N/A

    SBIR Phase II 1999 Environmental Protection Agency
  6. Singlet Delta Oxygen Airflow Sterilization for Building Protection

    SBC: DIRECTED ENERGY SOLUTIONS            Topic: 05NCERP1

    Directed Energy Solutions (DES) proposes to design, fabricate, and test a basic prototype decontamination device for protecting buildings from chemical and biological weapons attack and the general enhancement of indoor air quality. The decontamination device generates metastable singlet delta oxygen (SDO), O2 (a1Δ), a strong oxidant of biological and chemical pathogens, from direct ...

    SBIR Phase II 2006 Environmental Protection Agency
  7. A NEW CHARGE BASED COAGULANT DOSE CONTROL INSTRUMENT

    SBC: Clear Corporation            Topic: N/A

    The catastrophic drinking water treatment plant failure in March 1993 in Milwaukee was a direct result of the inability to control coagulant chemical dosage during significant changed in raw water quality. This event largely dispelled the myth that only small water utilities were vulnerable to such control problems. The current state of this critical technology, coagulant dose control, is woeful ...

    SBIR Phase II 1995 Environmental Protection Agency
  8. Novel Catalysts for Hydrogenolysis of Organochlorine Pollutants

    SBC: TDA RESEARCH, INC.            Topic: N/A

    Hydrogenolysis is an energy efficient, zero emission method for the detoxification of hazardous chlorinated hydrocarbon (CHC) wastes. In CHC hydrogenolysis, the chlorinated hydrocarbon is reacted with hydrogen to produce a hydrocarbon and an inorganic acid (HC1). In the Phase I project, TDA Research, Inc. (TDA), demonstrated a new type of catalyst with high activity for hydrodechlorination of al ...

    SBIR Phase II 1995 Environmental Protection Agency
  9. A Novel Extractant for the Selective Removal of Arsenic from Industrial Wastewaters

    SBC: TDA RESEARCH, INC.            Topic: N/A

    The combustion of fossil fuels, particularly coal, introduces large quantities of arsenic into the environment, much of which reaches natural waters. Acute arsenic poisoning results from ingestion of only 100 mg of the element, while chronic poisoning occurs with the continued ingestion of smaller amounts. Processes developed for arsenic removal from drinking water are appropriate for small volu ...

    SBIR Phase II 1995 Environmental Protection Agency
  10. GENERALIZED MODELING OF CONDENSATION FOR REACTOR APPLICATION

    SBC: CREARE LLC            Topic: N/A

    A CONSTITUTIVE PACKAGE WILL BE DEVELOPED FOR THE MODELING OFDIRECT CONTACT CONDENSATION IN ADVANCED COMPUTER CODES FOR NUCLEAR REACTOR ANALYSIS. SINCE CURENT APPROACHES ARE BUILT UPON FLOW REGIME MAPS WHICH DO NOT ACCOUNT FOR CON DENSATION EFFECTS, PRESENT ADVANCED THERMAL/HYDRAULIC CODES ARE UNABLE TO MODEL COLD LEG FLOW BEHAVIOR CONSISTENTLY DURING CONDENSATION, ESPECIALLY IF THE FLOW IS OSCILLA ...

    SBIR Phase II 1986 Nuclear Regulatory Commission
US Flag An Official Website of the United States Government