List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 51 - 60 of 24569 results
  1. Reconstruction Algorithms for High-Energy Computed Tomography Images of Rocket Motors

    SBC: Lickenbrock Technologies LLC            Topic: AF121187

    In the Phases I and II of this SBIR project, a software product was developed, delivered and deployed at the Hill AFB CT facility for highly resolving computed tomography of aerospace components.The project was focused upon speed of execution using high-performance computer architectures.In this commercialization readiness program, the technology will be advanced to at least TRL 6 by the following ...

    SBIR Phase II 2018 Department of DefenseAir Force
  2. Wireless Technology for Probes and Accessories for Nondestructive Inspection Testing Instruments

    SBC: Jentek Sensors, Inc.            Topic: AF121214

    Aircraft structure nondestructive testing (NDT) is performed in a field or depot setting depending primarily on the amount of disassembly required to gain access to the inspection area. In order to reach set field and depot inspection intervals, the minimum detectable flaw size (Andi) must be sufficiently small. Legacy NDT methods with Andi's that are too large require out of cycle inspections whi ...

    SBIR Phase II 2018 Department of DefenseAir Force
  3. Just In Time (JIT) Aircraft Maintenance System

    SBC: Cybernet Systems Corporation            Topic: AF121225

    Roughly 40% of USAF maintenance records have poorly coded work unit codes.This degrades aircraft pre-induction analysis and fleet-wide analysis of top drivers.Manual methods to scrub the data take years to develop for each air platform.Cybernet designed a machine learning algorithm to automatically correct coding errors without expert input.The Smart Data Cleanser (SDC) performed 4 years of work i ...

    SBIR Phase II 2018 Department of DefenseAir Force
  4. Multi-Stage Multiple Hypothesis Tracker (MS-MHT) for Real Sensor Data

    SBC: SYSTEMS & TECHNOLOGY RESEARCH LLC            Topic: AF131131

    Systems & Technology Research (STR) proposes the development and maturation of a state-of-the-art multi-target tracking software for processing operational data. The proposed software consists of the Multi-Stage Multiple Hypothesis Tracker (MS-MHT) for efficient and accurate target tracking and the Parameter Optimization Tool (PAROPT) for optimization of tracking parameters. The goal for the Phase ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Arc jet Test-Article Surface Recession Rate Monitor

    SBC: Innovative Scientific Solutions, Inc.            Topic: AF141228

    The overall objective of the Phase II Follow-on program is to deploy a stereo photogrammetry system for real-time measurements of surface ablation rates in a rotating detonation engine (RDE) environment.The key milestones for the program are 1) prototype evaluation in the Detonation Engine Research Facility (DERF) using ablative test samples in an RDE, 2) assessment of the data processing software ...

    SBIR Phase II 2018 Department of DefenseAir Force
  6. Ultralightweight Airframe Concepts for Air-launched Intelligence, Surveillance, and Reconnaissance (ISR) Unmanned Aerial Vehicles (UAVs)

    SBC: Judd Systems Technologies, LLC            Topic: AF151072

    The main goal of the ALERT Phase II program is the preliminary design of a robust air vehicle that can meet all the performance goals while using a structural design with a high content of dielectric skins. This includes determining the flight envelope required to complete the desired customer missions, and then sizing the flight surfaces and propulsion system for optimum performance. Since the AL ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Hypersonic Data Recovery

    SBC: Systima Technologies, Inc.            Topic: AF151180

    Systima Technologies, Inc. proposes the development of an unmanned hypersonic test vehicle recovery system that will greatly enhance the effectiveness of hypersonic flight testing. Systima plans to perform a comprehensive review of the various hypersonic vehicle test environments and recovery requirements in order to develop recommendations for suitable vehicle recovery technologies for the range ...

    SBIR Phase II 2018 Department of DefenseAir Force
  8. Validation of Low Hydrogen Embrittlement (LHE) Alkaline Zinc Nickel Electroplating for Steel and Aluminum Electrical Connectors, Back-Shells and Components

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF161007

    Many of the US Department of Defense (DOD) electrical connectors, back-shells and components currently contain cadmium (Cd).Cadmium is a known carcinogen.Furthermore, the cadmium is typically conversion coated with a hex-chromate which is also hazardous.Both the cadmium plating process and its subsequent conversion coating have been proven to be toxic (unlike other processes such as chromium plati ...

    SBIR Phase II 2018 Department of DefenseAir Force
  9. Additive Manufacturing Technique for Replacement of Complex Castings

    SBC: RENAISSANCE SERVICES            Topic: AF161010

    Support for legacy aircraft systems is critical to the warfighter.Air Force sustainment responsibilities encompass thousands of airframes and engines, including systems that have been out of production since the 1960s and 1970s.Among the most critical out-of-production components are those made from aluminum, steel, and magnesium castings.Castings are essential to gearboxes and housings, which are ...

    SBIR Phase II 2018 Department of DefenseAir Force
  10. Direct Metal Adsorption Printing (DMAP)

    SBC: Digibeam Corporation            Topic: AF161010

    3D printing has recently taking a lead role as a potential solution for future manufacturing. However, there are still many problems and limitations to the technology for cost effective high resolution, high throughput manufacturing.Derived from the SBIR Phase I effort, Digibeam is presenting an innovative solution using a different beam and growth process that directly addresses both resolution a ...

    SBIR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government