You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Resolution Simulation of Liquid Jet Ejection and Aerosolization for Chemical/Biological Defense

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    High resolution modeling of the aerosolization process for relatively large liquid jets is needed to quantify the dispersion of hazardous chemical or biological agents from damaged/punctured containers. A second application is the prediction of thedistribution of neutralization agents injected into clouds of hazardous chemical or biological agents. A high fidelity model is needed to provide accura ...

    SBIR Phase II 2003 Department of DefenseAir Force
  2. Advanced Physical Design Tools for 3-Dimensional Integrated Circuits

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    Three-dimensional (3-D) integrated circuits (ICs) can significantly improve circuit performance and offer the promise of integrating various technologies (memory, logic, RF, mixed-signal, optoelectronics)within a single block. Lack of 3-D design tools andheat dissipation froThree-dimensional (3-D) integrated circuits (ICs) can significantly improve circuit performance and offer the promise of int ...

    SBIR Phase II 2003 Department of DefenseDefense Advanced Research Projects Agency
  3. Low Emissions, Affordable Fuel Injector for High Performance Military Gas Turbines

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    In this Phase II SBIR effort, CFD Research Corporation (CFDRC) will continue development of an advanced low emissions fuel injector for military engines that is based on CFDRC's lean direct fuel injector technology. The design produces a unique flamepattern caused by a bifurcated flow pattern, in which the pilot airflow separates from the main airflow and a recirculation zone is created between t ...

    SBIR Phase II 2003 Department of DefenseNavy
  4. Development of a High Fidelity PC Based Simulator for Modeling the Atmospheric Transport and Dispersion of Nuclear, Chemical, Biological, and Radiolog

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    A simulation tool is proposed to model and simulate the wind fields, turbulence fields, and the unsteady dispersion of NCBR substances in urban areas on the building to city blocks scale. This Computational Fluid Dynamics (CFD)-based approach has beenshown to accurately simulate the urban wind and turbulence fields with minimal approximations, and has been demonstrated by modeling the flow fields ...

    SBIR Phase II 2003 Department of DefenseDefense Threat Reduction Agency
  5. Design of a Rheometer for Time-Dependent Gel Rheology

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    Simulation of time-dependent rheological behavior in an advanced Computational Fluid Dynamics (CFD) environment revealed that inclusion of a structural parameter within a modified empirical power law expression is capable of predicting the flowcharacteristics of thixotropic gels. Validation of the CFD based predictions was completed using a combination of published AMCOM test data and thixotropic ...

    SBIR Phase II 2003 Department of DefenseArmy
  6. Low Profile Confomal Designs for the VHF/UHF Laminated Antenna

    SBC: Sciperio, Inc.            Topic: N/A

    Conformal antennas for VHF/UHF have multiple uses, but the Phase I effort by Sciperio was focused on the design of a SLICE band omni-directional UHF antenna for integration within a soldiers helmet. The Phase I results for this conformal concept wereproof of the feasibility of designing an antenna capable of being integrated within or onto the surface of a Kevlar helmet. The antenna consists of ...

    SBIR Phase II 2003 Department of DefenseArmy
  7. Wavelength Division Multiplexing Fiber Optic Microwave Delay System

    SBC: CUSTOM MICROELECTRONIC SYSTEMS, INC.            Topic: N/A

    The objective of this Phase II proposal is to build, test, and deliver a programmable fiber-optic delay line capable of delaying an instantaneous bandwidth from 4 to 12 GHz from 0 to > 20 msecs, programmable in 10 nsec steps. The proposed delay line willimplement DWDM fiber-optic technology to minimize optical fiber while achieving an infinite capture time. A recent study involving an experiment ...

    SBIR Phase II 2003 Department of DefenseArmy
  8. Concept Development and Assessment of a Multi-Mode Seeker for the National Missile Defense Exotmospheric Kill Vehicle

    SBC: DAVIDSON TECHNOLOGIES INC            Topic: N/A

    This Phase II SBIR will result in the design, fabrication and demonstration of advanced components for a semi-active RF sensor for the EKV of the Ground based Midcourse Defense System (GMDS). The baseline concept is derived from the results of the Phase ISBIR titled Concept Development and Assessment of a Multi-Mode Seeker for the NMD EKV. That effort identified the key technologies required to pr ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  9. Segmented Launch Vehicle Risk Reduction Program

    SBC: K T Engineering Corporation            Topic: N/A

    A Phase II program is proposed to address fundamental technical and cost risks associated with the Segmented Launch Vehicle (SLV) concept. The SLV is an innovative, largely unexplored approach that will significantly reduce the cost of delivering cargo toLow Earth Orbit. A family of vehicles is being developed to service small (4,000lbm), medium (30,000lbm), and large (100,000lbm) commercial and G ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  10. Phase II Proposal- Relay Replacement

    SBC: Lewis Innovative Technologies, Inc.            Topic: N/A

    Lewis Innovative Technologies, Inc. (LIT) has, under Phase I efforts, developed an electronic relay design capable of serving as a replacement for N-130 relays used on Navy CVN 68 class ships . To accomplish this, LIT has developed and utilizedproprietary techniques (Patent Pending) utilizing MOSFET technology to control alternating current power. In addition, LIT has developed monitoring/trigge ...

    SBIR Phase II 2003 Department of DefenseNavy
US Flag An Official Website of the United States Government