You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Advanced High Mass Fraction Tactical Rocket Motor Case

    SBC: FMW COMPOSITE SYSTEMS, INC.            Topic: AF04199

    The higher Mach number flight capability required in future missile systems has necessitated the development of advanced materials capable of surviving the increased thermal loads expected in these systems. Although previous research has indicated that titanium matrix composites (TMCs) are a potential solution to this problem, the high cost of these materials has severely hindered their considerat ...

    SBIR Phase II 2005 Department of DefenseAir Force
  2. Advanced Infrared Emitter Array (AIREA)

    SBC: Chip Design Systems LLC            Topic: AF141225

    ABSTRACT: We propose build Infrared LED (IRLED) scene projectors that are able to project larger than 1k by 1k imagery with maximum temperatures of 3000K, frame rates in excess of 400 Hz, and emission wavelength between 3-5 microns. We will explore the use of through-silicon-via (TSV) and silicon interposer packaging technologies to achieve that goal. We will also evaluate the performance and cos ...

    SBIR Phase I 2014 Department of DefenseAir Force
  3. Advanced Infrared Emitter Array (AIREA)

    SBC: Chip Design Systems LLC            Topic: AF141225

    ABSTRACT: We propose to build Infrared LED (IRLED) scene projectors that are able to project larger than 1k by 1k imagery with maximum temperatures of 3000K, frame rates in excess of 400 Hz, and emission wavelength between 3 and 5 microns. Our team consists of experienced IRLED fabrication experts, RIIC designers, and packaging specialists.; BENEFIT: Infrared LED (IRLED) arrays represent a potenti ...

    SBIR Phase II 2016 Department of DefenseAir Force
  4. Advanced Intelligent Web-Based Options to Acquire and Analyze Aircraft Health and Test Data

    SBC: Sentient Science Corporation            Topic: N08122

    Topic Synopsis: Current aircraft disposition tools are not designed to take advantage of predictive prognostic information that will be available on new systems such as the F-35 PHM system or the proposed Maintenance and Monitoring system for the E-2D Hawkeye. The central challenges in this topic are to (1) develop automated reasoner technologies to distill large volumes of PHM data into actionabl ...

    SBIR Phase I 2008 Department of DefenseNavy
  5. Advanced Manufacturing Technologies

    SBC: Stutz Applied Technology, Inc.            Topic: DLA152001

    A method of utilizing 3D printed molds to produce low cost metal parts for obsolescence, engineering development prototypes, and low rate production is proposed for development and evaluation.This method is capable of producing parts of similar quality to mass production techniques such as green sand and lost wax casting at a fraction of the setup costs for those methods.

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  6. Advanced Manufacturing Technologies

    SBC: Sentient Science Corporation            Topic: DLA152001

    In response to Defense Logistics Agencys SBIR for Advanced Manufacturing Technologies, Sentient proposes to develop a life-cycle cost optimization tool based on its DigitalClone-ComponentTM (DCC) modeling technology.This tool will enable users to better understand the tradeoffs between manufacturing cost and performance/durability of the resultant components. This is particularly attractive for lo ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  7. Advanced Manufacturing Technologies

    SBC: Sentient Science Corporation            Topic: DLA152001

    In response to DLA SBIR Topic DLA152-001 for Advanced Manufacturing Technologies, Sentient Corporation (Sentient) proposes to develop a life cycle cost optimization tool based on our commercial DigitalClone modeling technology. This tool will enable users to evaluate the tradeoffs between alternate manufacturing processes, implementation costs, and the performance/durability of the resultant comp ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  8. Advanced RIIC Technology to Increase Density and Efficiency of IRLED Arrays (ART-IDEA)

    SBC: Chip Design Systems LLC            Topic: AF171015

    We propose to study how extraction efficiency can be improved by reducing IRLED pixel pitch. Our approach is to scale the size of RIIC pixel and IRLED device from 24-microns down to 12-microns and to lower the IRLED drive voltage from 10 Volts to 5 Volts.

    SBIR Phase I 2017 Department of DefenseAir Force
  9. Advanced Rocket Propulsion Technologies

    SBC: FMW COMPOSITE SYSTEMS, INC.            Topic: AF04199

    The future propulsion requirements of the USAF will require substantial performance improvements, especially stage mass fraction as defined by the Phase III IHPRPT goals. The development and transition to production of titanium matrix composites (TMC) offer the potential of significant mass fraction gains for liquid engines. This program proposes the substitution of TMC into the impeller, which ...

    SBIR Phase I 2004 Department of DefenseAir Force
  10. Advanced Seal Technology for Helicopter Drive System Application

    SBC: Sentient Science Corporation            Topic: A12076

    Gearbox seal wear and leakage is a major source of maintenance and downtime for rotorcraft. Sentient will use our advanced tribology modeling technology to evaluate coatings and surface texturing processes for carbon face seals and provide a generalized modeling approach that can replace physical testing of seals. These models will be used to evaluate several rotorcraft seal designs proposed by ou ...

    SBIR Phase I 2012 Department of DefenseArmy
US Flag An Official Website of the United States Government