You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative manufacturing research on forming of large light armor alloy sections resistant to blast and penetration

    SBC: CORVID TECHNOLOGIES, LLC            Topic: A09051

    Weldments that join plates of aluminum or steel combat vehicle hulls can be the lowest strength area of the structure and thus provide a decreased level of ballistic protection. To avoid welds, seamless hulls could be formed from thick plate if a suitable manufacturing process is developed. Corvid Technologies, teamed with Concurrent Technologies Corporation (CTC) performed a series of modeling, s ...

    SBIR Phase II 2011 Department of DefenseArmy
  2. Integrated Overset Meshing and Grid Assembly Capability

    SBC: POINTWISE INC            Topic: AF083259

    ABSTRACT: Pointwise, Inc. proposes to integrate overset grid assembly (OGA) software with its state-of-the-art mesh generation software to allow efficient, effective overset meshing and grid assembly. Support for structured and unstructured overset meshing will be added. Composite mesh visualization tools will be added to aid the user in locating, understanding, and correcting overset assembly pr ...

    SBIR Phase II 2011 Department of DefenseAir Force
  3. Integrated Power System Manager (IPSManager)

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: N101055

    Motivated by the uncertainty in rising fuel expense and fleet total ownership costs, the US Navy is currently addressing power and energy management as a prime research focus area with the goal of strategically allocating energy resources to increase efficiency. In support of these goals, they have identified a need to retrofit their DDG-51 class ships with new technology including hybrid electri ...

    SBIR Phase II 2011 Department of DefenseNavy
  4. Keratin Biomaterials for Cranio-facial Tissue Engineering

    SBC: Keranetics, LLC            Topic: OSD09H10

    The majority of personnel injured in OIF/OEF have suffered blast injuries from IEDs. Blasts often cause cranio-facial trauma that is difficult to repair surgically. The current standard of care involves the placement of fixation devices and off label use of growth factor carriers. These strategies often require multiple surgical interventions creating a significant need for better technologies ...

    SBIR Phase II 2011 Department of DefenseDefense Health Agency
  5. Kinetic Power for Dismounted Warriors

    SBC: Bennett Aerospace, Inc.            Topic: AF093023

    ABSTRACT: Bennett Aerospace proposes to develop an innovative method of generating electrical power via soldier-worn systems. Our approach integrates energy harvesting structures into various locations on garments and equipment in order to collect kinetic energy. The structures are lightweight and flexible. BENEFIT: Benefits to this approach are numerous in that it provides a simple, though novel, ...

    SBIR Phase II 2011 Department of Defense
  6. Laser DEW Threat Detection System for UAV

    SBC: NANOHMICS INC            Topic: N101087

    A significant fraction of new battlefield instrumentation is based on lasers and the performance of directed energy weapons (DEW) has improved. Therefore, the susceptibility of modern weapon, reconnaissance, and surveillance systems in particular those with optical sensors is acute. Recent interest in protection of Unmanned Aerial Vehicles (UAV) and their sensor suites has become extremely impor ...

    SBIR Phase II 2011 Department of DefenseNavy
  7. Low-Cost, High Throughput, Roll-to-Roll Ink-Jet Manufacturing of Hybrid Electronic Systems on Flexible Substrates

    SBC: OMEGA OPTICS, INC.            Topic: N10AT031

    Realizing the tremendous demand and commercialization potential of flexible electronic components for modern systems, Omega Optics, Inc., together with the University of Texas at Austin, propose Low-Cost, High Throughput, Roll-to-Roll Ink-Jet Manufacturing of Hybrid Electronic Systems on Flexible Substrates. In the Phase I program, using an ink-jet developed 2-bit 1x4 Phased Array Antenna (PAA) sy ...

    STTR Phase II 2011 Department of DefenseNavy
  8. LOW-COST INDICATOR AND DOSIMETER FOR WARFARE GASES

    SBC: Coal Gas Inc.            Topic: N/A

    THE OBJECTIVE OF THIS PROPOSAL IS TO CONDUCT PRELIMINARY TESTS ON A NOVEL CHEMISTRY WHICH COULD RESULT IN THE PRODUCTION OF A LOW COST WAFER WHICH CHANGES COLOR UPON EXPOSURE TO WARFARE GASES (WG). SIMILAR WAFERS WHICH WE DEVELOPED FOR OTHER GASES ARE ABOUT 2" X 1" X 1/16" AND WEIGH ABOUT 2.3 GM. THESE CHROMOSENSE (TM) WAFERS CAN DETECT HYDROGEN SULFIDE, ETC. IN 10-30 SEC. AT CONCENTRATIONS OF THE ...

    SBIR Phase II 1987 Department of DefenseAir Force
  9. LOW-LOSS SAW FILTERS USING MONOLITHIC CONSTRUCTION- DEMONSTRATION

    SBC: Hartmann Research Inc.            Topic: N/A

    THE PROPOSED PROGRAM WILL PROVIDE EXPERIMENTAL VERIFICATION OF A NEW MONOLITHIC LOW-LOSS SAW TRANSDUCER STRUCTURE. THE STRUCTURE IS A SINGLE PHASE UNIDIRECTIONAL TRANSDUCER (SPUDT) BUT AVOIDS THE PROBLEMS ENCOUNTERED BY PREVIOUS SPUDT STRUCTURES. THE ADVANTAGES OF THE STRUCTURE INCLUDE EASE OF FABRICATION AND ADEQUATE REFLECTIVITY FOR BOTH WIDE BAND AND NARROW BAND FILTERS. THE STRUCTURE ALSO AVOI ...

    SBIR Phase II 1987 Department of DefenseArmy
  10. Material Approaches to Mitigate Gap Filler Cracking

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: AF093116

    Development of crack resistant conductive gap-fillers fits within the Air Force"s goal of investing in low observable maintenance improvements to reduce sustainment costs and aircraft downtime. Commercially available gap-fillers are initially effective, but performance degrades under thermal and mechanical fatigue resulting in micro- and macrocracks within the matrix. Phase I showed the feasibili ...

    SBIR Phase II 2011 Department of DefenseAir Force
US Flag An Official Website of the United States Government