List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 51 - 60 of 4922 results
  1. Investigatioin of Diode Lasers for Removal of Large-Area Appliqu¿

    SBC: Sensintel Inc.            Topic: N/A

    Advanced Ceramics Research Inc. (ACR) has recently developed a low-density water-soluble mandrel material composed of a hollow ceramic-microsphere filler bound together with a high thermal stability thermoplastic binder. ACR and its partners propose to usea variation of this product containing high thermal-conductivity powders for a novel low-cost tooling material for polymer composites. Prelimin ...

    SBIR Phase I 2001 Department of DefenseNavy
  2. High toughness rare earth-based Fibrous Monolith Permanent Magnets

    SBC: Sensintel Inc.            Topic: N/A

    In this phase I STTR program, Advanced Ceramics Research, Inc. (ACR) and the University of Delaware (UD) propose the development of an innovative process for high energy product rare earth-based permanent magnets with improved toughness based on ACR'spatented Fibrous Monolith (FM) and the UD's Automated Tow Placement (ATP) processes. The novel combination of high-toughness NdFeB-based FM material ...

    STTR Phase I 2001 Department of DefenseNavy
  3. Low Cost Ceramic-Lined Rocket Motor Case Design

    SBC: Sensintel Inc.            Topic: N/A

    In this phase I SBIR program, a team led by Advanced Ceramics Research, Inc. (ACR), and its partners propose the development of an innovative integral co-cured rocket motor casing comprised of a graphite/epoxy shell with a novel heat shield and linerfabricated from ACR's patented gelcasting ceramic material. The novel combination of materials will provide a unique synergy where the graphite/epoxy ...

    SBIR Phase I 2001 Department of DefenseAir Force
  4. Novel Rapid Prototyping Technique for the Fabrication of Structural Components

    SBC: Sensintel Inc.            Topic: N/A

    Advanced ceramics research (ACR), has developed a simple, highly promising thruster fabrication method utilizing novel gel casting and injection molding techniques. These methods will be used for the creation of low-cost thrusters and nozzles. Thefollowing proposal details a synergistic combination of the two technologies to create a thermal protection system concept that is low-cost and innovativ ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  5. Novel Low CTE Composite Materials for Propulsion Applications

    SBC: Sensintel Inc.            Topic: N/A

    Advanced Ceramics Research, Inc. (ACR) proposes to develop novel composite systems for thermal management in propulsion applications. Traditionally, phenolic-based materials are used as insulators because of their low thermal conductivity and low cost.Unfortunately, insulating nozzle and thruster liners composed of these materials suffer from short lifetimes as a result of pyrolysis at elevated t ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  6. Environmental Assessments and Mitigation of Naval Operations

    SBC: 3E TECHNOLOGIES INTERNATIONAL, INC.            Topic: N/A

    The installation of Programmable Logic Controllers has become an integral part of shipboard control system. The most popular method for PLCs to communicate with external devices is through RS-232 connections using the MODBUS protocol. Newer PLCs supportDeviceNet, ControlNet, or Ethernet networks, as well as Data Highway Plus, RS-232C, RS-422A, or RS-423A networks. As the Programmable Logic Cont ...

    SBIR Phase I 2001 Department of DefenseNavy
  7. Fault Location in an Intelligent Open Sensor Network

    SBC: 3E TECHNOLOGIES INTERNATIONAL, INC.            Topic: N/A

    As the complexity of the battlespace has grown exponentially and the outcome of the engagement is increasingly a function of communications speed, accuracy and relevance, it is critical to have a always-connected ship-board personal communications systemthat has the ability to support information-in-place which receives and transmits location and context intelligent information, supports decision ...

    SBIR Phase I 2001 Department of DefenseNavy
  8. Low Cost Compression Techniques Applied To Encrypted Data Distribution System

    SBC: 3E TECHNOLOGIES INTERNATIONAL, INC.            Topic: N/A

    Condition monitoring depends on information that is extracted from data gathered through a well-defined, yet dispersed, sensor network. The combination of embedded, self validating sensors, the development of a widely dispersed self-organizing sensorarchitecture and the intelligent agent software to facilitate the development and design of an emergent, self aware monitoring system will make avail ...

    SBIR Phase I 2001 Department of DefenseNavy
  9. Compliant Brush Shroud Casing Development for Aircraft Engine Compressors

    SBC: ADVANCED COMPONENTS & MATERIALS, INC.            Topic: N/A

    The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

    SBIR Phase I 2001 Department of DefenseAir Force
  10. Compliant Brush Shroud Casing Development for Aircraft Engine Compressors

    SBC: ADVANCED COMPONENTS & MATERIALS, INC.            Topic: N/A

    The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

    SBIR Phase II 2001 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government