You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Performance and Design Development for Compost Technology used in Green Infrastructure, Green Building, and Urban Storm Water Applications

    SBC: Filtrexx International, LLC            Topic: 09NCERA1

    Green builders and designers, urban planners, engineers and architects, and watershed manager working with green infrastructure, low impact development (LID), storm water management, water quality improvement, total maximum daily load (TMDL) designated stream segments, and carbon footprint reduction programs need more high performance, cost-effective, green technologies to design and implement in ...

    SBIR Phase I 2010 Environmental Protection Agency
  2. Pigmented Solvent-Free Corrosion-Resistant UV Coating System

    SBC: DR. BEN CURATOLO, INC.            Topic: 09NCERB1

    This SBIR Phase I project is designed to determine the feasibility of preparing novel coatings for corrosion resistance through the incorporation of pigment and non-chrome corrosion inhibitor into a solvent-free ultraviolet (UV) light curable matrix. In particular, the proposed research is directed toward determining the feasibility of preparing a safe, novel chromium-free, solvent-free, corr ...

    SBIR Phase I 2010 Environmental Protection Agency
  3. Rad-hard Location and Attitude Module (R-LAM)

    SBC: Archangel Systems, Inc.            Topic: S402

    R-LAM (Rad-hard Location and Attitude Module), promises a new generation of both integrated navigation modules and stand-alone navigation subsystems including nav-grade IMU's, atomic-precision clocks and GPS units compliant with the Space Plug and Play Architecture (SPA) initiative. R-LAM leverages two active DARPA MTO programs. In the Navigation-Grade Integrated Micro-Gyroscope (NG-IMG) project ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  4. Adaptive Drainage Slots for Acoustic Noise Attenuation

    SBC: Cornerstone Research Group, Incorporated            Topic: A203

    Cornerstone Research Group, Inc. (CRG), proposes to demonstrate feasibility in the reduction of noise attributed to drainage slots in jet engine acoustic liners. This will be accomplished through the development of design rules for optimum slot design and the implementation of adaptive material technologies. CRG proposes to bring this technology to a technology readiness level (TRL) 2 after the Ph ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  5. SMP Bladder Tooling for Manufacturing Composites

    SBC: Cornerstone Research Group, Incorporated            Topic: X503

    CRG's shape memory polymer (SMP) Bladder Tooling is a cutting-edge manufacturing technology that can meet the manufacturing needs of the Ares launch vehicles. This process provides labor savings, weight reductions, and reliable manufacturing results for fabricating complex composites. SMP bladder tooling eliminates the transferring process by operating as both a rigid lay-up mandrel and an elastic ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  6. Innovative Solid State Lighting Replacements for Industrial and Test Facility Locations

    SBC: Energy Focus, Inc.            Topic: T1002

    The proposed innovation is the replacement of existing test stand and parking lot fixtures with current SSL LED technology. The replacement fixtures will reduce energy consumption, generate less heat and provide maintenance free operation for over 50,000 hours. An explosion-proof fixture is capable of containing an internal combustion event without allowing flames or hot gasses to escape to the s ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  7. Metal-Mesh Optical Filter Technology for Mid IR, Far IR, and Submillimeter

    SBC: Lake Shore Cryotronics, Inc.            Topic: S104

    This SBIR Phase I proposal describes a method of fabrication of far IR and THZ range multilayer metal-mesh filters. This type of filter consists of alternative layers of polymer material and structured thin metal films. The proposed filters are radiation hard and lightweight. The fabrication process proposed will increase the availability of such filters and expand the market while reducing the co ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  8. Aircraft Engine Life-Consumption Monitoring for Real-Time Reliability Determination

    SBC: Nastec, Inc.            Topic: A108

    A real-time life-use consumption monitor is proposed for aircraft engine systems. The life monitor will process power data available on the aircraft to calculate the accumulating in-flight power loading which the engine experiences. This power loading reduces the available life of the engine. Under emergency in-flight conditions and/or foreign object damage, engine loads and temperatures can inc ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  9. High Chamber Pressure, Light Weight Thrusters

    SBC: Plasma Processes, LLC            Topic: S308

    The performance liquid propellant engines can be significantly improved by increasing both combustion temperature and pressure and reducing engine weight. State of the art Bi-propellant engines are metallic; the highest temperature combustion chambers are made of iridium/rhenium metals. Utilizing carbon-carbon composites for thrust chamber structures can reduce component weight by as much as 90%. ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  10. Mass Production of Mature Lunar Regolith Simulant

    SBC: Plasma Processes, LLC            Topic: X602

    As NASA prepares for future exploration activities on the Moon, there is a growing need to develop higher fidelity lunar soil simulants that can accurately reproduce the properties and behavior of lunar soil. Simulants are employed on earth to verify the performance of equipment, mechanisms, structures and processes to be used on the lunar surface. One of the significant limitations of current si ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government