Award Data

Launch vehicles experience extreme acoustic loads during liftoff driven by the interaction of rocket plumes and plume-generated acoustic waves with ground structures. Currently employed predictive capabilities to model the complex turbulent plume physics are too dissipative to accurately resolve the propagation of acoustic waves throughout the launch environment. Higher fidelity liftoff acoustic a ...

Boulder Nonlinear Systems (BNS) and University of Dayton (UD) will team on development of a non-mechanical beam steering (NMBS) subsystem for Entry, Descent and Landing (EDL) sensors. BNS will improve their current polarization grating (PG) technology which is capable of switching well over the +- 25 degree requirement called for in the solicitation. Advances to the PG technology specific to the ...

Fibertek, Inc. in partnership with researchers at the Pennsylvania State University Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D) are proposing to develop a state of the art, space-qualifiable laser transmitter that meets the requirements of the flash lidar transmitter defined in the 2016 STTR subtopic T9.01, Navigation and Hazard Avoidance Sensor Technolog ...

The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

The proposed solution exploits recent advances in computer vision to conceive of a single-camera + gyro + accelerometer vision-based navigation solution such that the processing will be lightweight (requiring only a single optical flow sample per frame). Known landmarks (natural or artificial) will have absolute positions known to planetary exploration worker robots. The worker robot can identif ...

NASA's long range goals of reducing the fuel consumption by 30% and increasing fuel efficiency by 35% can be partially accomplished through increasing engine operation temperatures. As a result, the disk section is desired to operate in increasingly higher temperatures, which will subject it to additional degradation mechanisms of oxidation and hot corrosion. One approach to enhance the tem ...

In this Phase I STTR project, pursuant to the Materials Genome Initiative (MGI) and Integrated Computational Materials Engineering (ICME) interests, the proposed collaborative effort between WSU and Advratech will represent the first AM optimization framework of its kind, constructed entirely from experimental sensor data collected in-situ. Rather than using in-process data to inform limited "phy ...

Tyvak, in collaboration with UCLA, proposes a novel approach to the challenge of creating a large reflector for Ka-band high data rate links. We propose to attach the primary reflector surface permanently to the surface of a 6U spacecraft and illuminate the reflector using a Cassegrain style subreflector with an illuminating antenna that is permanently mounted to the transmitter / receiver inside ...

One of the challenges facing missions to other planetary bodies including Earth's Moon, Mars, Venus, Titan, Europa; and proximity operations (including sampling and landing) on small bodies such as asteroids and comets' is the ability to provide accurate altimetry for descent, then assess safe landing sites by surveying the landscape. To address NASA's need for space-hardened planetary entry, desc ...

Advances in structured heterogeneity together with nanomaterials tailoring has made it possible to create thermoelectrics using high temperature, polymer composites. While such thermoelectrics do not have the capability to approach the efficiency of top performing ceramic modules such as BiTe, they do provide two unique aspects of use in energy scavenging: the ability to cover large areas easily, ...