You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Advanced Thin-Film Microwave Filters

    SBC: ENGI-MAT CO            Topic: N06124

    nGimat proposes to develop a miniaturized, tunable bandpass filter using thin film ferroelectric technology. The filter design will take advantage of the tunable characteristics of ferroelectric materials by the application of a DC voltage. In Phase I, nGimat will design and fabricate the circuit, optimize materials, perform modeling and simulation, and build prototype tunable filters. In Phase ...

    SBIR Phase I 2006 Department of DefenseNavy
  2. SBIR Phase I: Three-Phase Nanocomposites for Embedded Capacitors

    SBC: ENGI-MAT CO            Topic: EL

    This Small Business Innovation Research (SBIR) Phase I project will investigate three-phase nanocomposite films for embedded capacitor applications. There is demand for an embedded capacitor technology that addresses the need for miniaturization and increased functionality of electronic systems. The proposed three phase nanocomposite artificial dielectrics have the potential to have high dielectri ...

    SBIR Phase I 2006 National Science Foundation
  3. Advanced Antenna Development

    SBC: ENGI-MAT CO            Topic: N06044

    nGimat proposes to develop a phased array antenna on lightweight substrates, consisting of ferroelectric phase shifters, feed network, and radiating element. The array antenna will be electronically scanned, eliminating mechanical problems of a rotating array. In Phase I, we will design a phased array antenna with reconfigurable elements, design and fabricate phase shifters, and work with our in ...

    SBIR Phase I 2006 Department of DefenseNavy
  4. Nanostructured Solid State High Temperature Power Capacitors

    SBC: ENGI-MAT CO            Topic: 32

    Graphite-based Thermal Interface Materials (TIM) can provide lower thermal resistance and thus enable thermal management solutions that improve the operating range for a wide variety of power electronic systems. In this project, two proprietary processes, combustion chemical vapor deposition (CCVD) and NanoSpray, will be utilized to synthesize nanostructured composite coatings, which will demonst ...

    SBIR Phase I 2006 Department of Energy
  5. Nanoparticle Synthesis and Coating for Exchange Coupled Permanent Magnets

    SBC: ENGI-MAT CO            Topic: AF06175

    The formation of exchange coupled permanent magnets consisting of nanometer sized hard magnetic grains enveloped in a soft magnetic matrix has been demonstrated experimentally to increase the energy product of advanced magnetic materials. Additional gains are still predicted, but improved control of the nanostructure must be achieved through a route that is both performance and cost effective. n ...

    SBIR Phase I 2006 Department of DefenseAir Force
  6. OCT Imaging of Diabetic Retinopathy in 1060nm Spectral Range

    SBC: MICRON OPTICS, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): The broad, long-term objective of the proposed research is to develop an imaging technology that provides both morphological and blood flow information for the diagnosis and management of diabetic retinopathy. This application proposes to demonstrate an advanced swept source optical coherence tomography (SS-OCT) system in the 1060nm spectral region. Although cu ...

    SBIR Phase I 2006 Department of Health and Human ServicesNational Institutes of Health
  7. SBIR Phase I: Swept-Laser Spectroscopic System for High Resolution and Sensitivity Imaging of Gold Nanoparticles

    SBC: MICRON OPTICS, INC.            Topic: EL

    This Small Business Innovation Research (SBIR) Phase I project proposes to generate a prototype high-resolution, high-speed spectroscopic system consisting of a 1060nm swept laser and a photoreceiver to characterize the scattering properties of gold nanoparticels. The research goals will be accomplished by pursuing four technical objectives: (1) Generate a wide range, narrow-band 1060nm swept-wav ...

    SBIR Phase I 2006 National Science Foundation
  8. Rapid and Robust Dynamics-based Nondestructive Method to Monitor Structural Health

    SBC: Millennium Dynamics Corporation            Topic: AF04T016

    Phase I efforts have concluded in successful demonstration of the use of a Laser Doppler Vibrometer in detection of cracks in composite and metal test specimens. A Damage Index formulation based on the distributed strain energies associated with the dynamic response (low as well as high frequencies) has been shown to vividly indicate the presence, size, and orientation of a damage. Phase II effor ...

    STTR Phase II 2006 Department of DefenseAir Force
  9. Development of an HPXe-Based Nuclear Explosion Monitor

    SBC: Mirmar-quantum Joint Venture            Topic: 02

    The Radiological Aerosol Sampler/Analyzer (RASA) has proven to be one of the most authoritative monitoring systems for detecting and confirming nuclear explosions, as required for implementing the Comprehensive Test Ban Treaty (CTBT). Because these monitors must be deployed worldwide under extreme environmental conditions, their reliability and ease of use is crucial to their acceptance. The f ...

    SBIR Phase I 2006 Department of Energy
  10. New Generation Nanocrystalline Materials for CB protection

    SBC: NanoScale Materials, Inc.            Topic: A05T024

    The objective of this STTR Phase II proposal is to optimize the new generation nanocrystalline formulation that was downselected from the Phase I project, which would be superior to surface modified activated carbon in terms of adsorption capacity and sel

    STTR Phase II 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government