You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 51 - 60 of 204654 results
  1. Conformal Frangible Coatings for Jet Fuel Systems by Atomic Layer Deposition

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: N212127

    Jet fuel is currently used as a heat sink for the engine oil system, but its cooling capacity is limited by a temperature constraint necessary to preclude the formation of coke deposits. Therefore, it is essential to develop a method to suppress or slough off coke formation that will permit extended utilization of the fuel for system cooling in advanced aircrafts for high Mach numbers. RMD propose ...

    SBIR Phase II 2023 Department of DefenseNavy
  2. Modeling of Solid-State Materials Consolidation Repair Process for Static Strength and Fatigue Life Predictions

    SBC: Global Engineering and Materials, Inc.            Topic: N212113

    Global Engineering and Materials, Inc. (GEM), along with its team members, Professor Hang Yu at Virginia Tech (VT) and Professor Rajiv Mishra at the University of North Texas (UNT), propose to develop a multiphysics based PSPP (process-structure-property-performance) approach and its associated toolkit for tailoring of additive friction stir deposition (AFSD) repair of aluminum components for impr ...

    SBIR Phase II 2023 Department of DefenseNavy
  3. Integrated Computational Materials Engineering (ICME) Modeling Tool for Optimum Gas Flow in Metal Additive Manufacturing Processes

    SBC: Global Engineering and Materials, Inc.            Topic: N21BT022

    Global Engineering and Materials, Inc. and Professor Jinhui Yan at the University of Illinois at Urbana-Champaign propose to develop an Integrated Computational Materials Engineering simulation toolkit for optimal tailoring of gas flow in laser powder bed fusion (L-PBF) and direct energy deposition (DED) to reduce defects (e.g., porosity and spatter) and surface roughness improve quality (e.g., mi ...

    STTR Phase II 2023 Department of DefenseNavy
  4. Efficient On-Aircraft Composite Repair Process Requiring Minimal Support Equipment

    SBC: LUNA LABS USA LLC            Topic: N161017

    Currently, the Navy uses a Double Vacuum Debulk (DVD) process to repair damaged graphite/epoxy and fiberglass/epoxy composite components. This process is done by impregnating dry fabric with resin, manually laying up the plies, and debulking in a separate piece of support equipment. The debulked ply stack is then placed on the repair area and cured. This process, which limits the size of the repai ...

    SBIR Phase II 2023 Department of DefenseNavy
  5. Superconducting Undulator Test Cryostat Development

    SBC: CRYOMAGNETICS INC            Topic: C5506a

    C55-06a-270224-AbstractDemand for increased brightness of synchrotron light sources has been driven by advances in novel experimental techniques studying nanomaterials, micro- and nanocrystals, and interactions of atomic and molecular structures. Strong demand has pushed technologies of low emittance electron sources, novel concepts in electron storage rings, free electron lasers (FELs) and undula ...

    SBIR Phase I 2023 Department of Energy
  6. Wire-Arc Additive Manufacturing and Wire-Arc ThermalSpray Methods to Clad Nuclear-Reactor Materials

    SBC: NANOCOATINGS INC            Topic: C5512a

    The Department of Energy (DOE) requires the demonstration of bimetallic corrosion-resistant surfaces for structural and cooling components used in molten-salt nuclear-reactor systems. Proposed coating materials must survive thermo-mechanical loading (e.g., no flaking or spalling) during exposure to the high-temperature conditions encountered during reactor operation and maintain metallurgical stab ...

    SBIR Phase I 2023 Department of Energy
  7. AC-LGAD silicon detectors with alternate gain layer for improved reliability

    SBC: EPIR, INC.            Topic: C5522c

    C55-22c-270318More stringent challenges, as required by future high energy physics experiments, require higher radiation tolerance and higher granularity to the silicon detectors. Recently developed precision timing detector technology based on silicon Low Gain Avalanche Diode (LGAD) although exhibits excellent timing performance, cannot attain 10 µm position resolution needed for advanced 4D det ...

    SBIR Phase I 2023 Department of Energy
  8. Robust cost-effective characterization of petrophysical properties in sedimentary geothermal applications leveraged by drilling data and cuttings

    SBC: GREENPATH SYSTEMS LLC            Topic: C5513a

    Petrophysical properties such as porosity and permeability are arguably the most important parameters in enhancing geothermal heat production through better completion design and stimulation plan. Collecting well logs are often passive and associated with additional costs. In addition, many logging packages cannot sustain high-temperature formations often observed in geothermal conditions. In thes ...

    SBIR Phase I 2023 Department of Energy
  9. High Channel Density Digital Data Acquisition System

    SBC: KLIMA JOANNA            Topic: C5522a

    C55-22a-270353The DOE Office of Nuclear Physics (NP) seeks new developments in detector electronics with significantly improved energy, position, timing resolution, sensitivity, rate capability, stability, dynamic range, and background suppression. Applications are sought to develop high channel density (>=256 channels/board) digital data acquisition system with >= 100 MSPS, >=12 bit ADC informati ...

    SBIR Phase I 2023 Department of Energy
  10. Elastic Emission Machining of Optics for Structural Biology Imaging using Fluid Jet Polishing

    SBC: OPTIPRO SYSTEMS, LLC            Topic: C5518a

    C55-18a-270355Synchrotron light sources have continuously and impressively grown in brightness and beam quality since their inception in 1947 at General Electric in upstate New York [1]. Indeed, we are at the point where X-ray synchrotron light sources have been optimized to the Diffraction Limit and Free Electron Lasers (FEL) have been fully developed. Nonetheless, ongoing manufacturing and metro ...

    SBIR Phase I 2023 Department of Energy
US Flag An Official Website of the United States Government