You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Thin Film Shape Sensing and Visualization

    SBC: QORTEK INC            Topic: N/A

    The sensor development in Phase II will build on the successful strain sensor array demonstration of Phase I to develop an autonomous operational and wireless sensor suite capability. The objective is to demonstrate that a low cost noninvasive sensor suitecan be developed with a wide range of application including embedded wireless communication conformal load bearing antenna structures and adapti ...

    SBIR Phase II 2003 Department of DefenseAir Force
  2. Evaluation of a Novel Magnetic Activated Carbon Process for Gold Recovery

    SBC: EnvirosafeTechnologies            Topic: N/A

    72321B03-I The processing rate in gold extraction applications is limited by current production methods. Activated carbon could be used to adsorb the dissolved gold, but its use is restricted by the need to remove spent granular carbon from the bulk ore by mechanical screening. An innovative technology that eliminates this processing step and improves the reaction kinetics would reduce energy c ...

    SBIR Phase I 2003 Department of Energy
  3. Feasibility of a Phosphate Recovery Circuit for Existing Waste Streams

    SBC: EnvirosafeTechnologies            Topic: N/A

    72325B03-I Phosphate beneficiation plants currently pump hundreds of thousands of gallons of fine refuse into waste impoundments every minute. This refuse contains not only fine phosphate, considered unrecoverable by current industrial practice, but also coarse phosphate that has been misplaced due to sizing inefficiencies. Unfortunately, this lost phosphate is a large portion of the total valu ...

    SBIR Phase I 2003 Department of Energy
  4. Metal Oxide Catalyst for Methacrylic Acid Preparation via One-Step Oxidation of Isobutane

    SBC: Evernu Technology, Llc            Topic: N/A

    70261B02-II Methacrylic acid (MAA) and its ester derivatives are important building blocks for many large- volume polymers and resins. By 1999, the U.S. annual production of the single methyl ester derivative, methyl methacrylate, reached 1.7 billion pounds. The current commercial route for making MAA and its ester derivatives is the acetone cyanohydrin (ACH) route, a multiple-step preparatio ...

    SBIR Phase I 2003 Department of Energy
  5. Metal Oxide Catalyst for Methacrylic Acid Preparation via One-Step Oxidation of Isobutane

    SBC: Evernu Technology, Llc            Topic: N/A

    70261B02-II Methacrylic acid (MAA) and its ester derivatives are important building blocks for many large- volume polymers and resins. By 1999, the U.S. annual production of the single methyl ester derivative, methyl methacrylate, reached 1.7 billion pounds. The current commercial route for making MAA and its ester derivatives is the acetone cyanohydrin (ACH) route, a multiple-step preparatio ...

    SBIR Phase II 2003 Department of Energy
  6. Metal Oxide Catalyst for Methyl Ethyl Ketone Production via One-Step Oxidation of n-Butane

    SBC: Evernu Technology, Llc            Topic: N/A

    72314B03-I Methyl ethyl ketone (MEK) is a commodity chemical in high demand with an annual production of over 675 million pounds in the U.S. alone. Currently, 87 % of the MEK is produced via the three-step sec-butyl alcohol route, which starts with the expensive 1-butene, consumes large amounts of energy, and generates much corrosive and toxic waste. To address the cost, energy, and environment ...

    SBIR Phase I 2003 Department of Energy
  7. Dynamic Instruction Set Reconfigurable Processor for Software Protection

    SBC: GATECHANGE TECHNOLOGIES, INC.            Topic: N/A

    GateChange Technologies, Inc. has performed extensive research on reconfigurable devices and systems. This research has identified the key benefits and fundamental limitations of the existing solutions. GateChange developed the Dynamic Instruction SetProcessor (DISP) in response to this research. DISP is an innovative, high-performance reconfigurable architecture that embodies new technology fo ...

    SBIR Phase I 2003 Department of DefenseAir Force
  8. Lightweight Titanium Heat Exchangers

    SBC: Materials Resources International            Topic: N/A

    The evolution of materials in advanced aircraft continues and there is emerging interest from the U.S. Air Force to move titanium alloys into heat exchangers for advanced aircraft. Titanium substitution will lower the weight of nickel base alloy heatexchangers by over 30%, leading to increased fuel economies and performance. The proposed Phase II effort will select a typical aircraft stainless ste ...

    SBIR Phase II 2003 Department of DefenseAir Force
  9. Materials Knowledge Base

    SBC: RJ LEE GROUP INC            Topic: N/A

    The overall technical objective is to develop the information systems technology necessary to implement a Materials Knowledge Base. This object-based data repository will allow the acquisition and storage of experimental materials analysis data,regardless of its origin or format. The mechanism is also provided for investigators to access and utilize that data in other experiments, analyses, or si ...

    SBIR Phase II 2003 Department of DefenseAir Force
  10. Artificial Dielectrics for High Power Microwave Applications

    SBC: FOCIA, RONALD J            Topic: N/A

    The scientific feasibility of fabricating lightweight artificial dielectric (AD) materials was demonstrated in the Phase I effort. The electrical performance of the AD materials was not optimal. Time constraints necessitated using readily availablematerials and it was known a priori that these materials would not offer the best performance. However, it was demonstrated that an AD material could ...

    SBIR Phase II 2003 Department of DefenseAir Force
US Flag An Official Website of the United States Government