You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Gigawatt Nonlinear Transmission Lines (GW-NLTL)

    SBC: NumerEx            Topic: AF09BT14

    Nonlinear transmission lines offer new vistas in the generation of high power microwave wave (HPM) signals. All electromagnetic sources use an active medium to convert electrical energy to high frequency waves and ultra-wide band signals that can perform useful work. Traditional methods rely on electron beams for the active medium. Nonlinear transmission lines use nonlinear circuit elements to ...

    STTR Phase I 2010 Department of DefenseAir Force
  2. Realistic State and Measurement Error Uncertainty Computation and Propagation for Space Surveillance and Reconnaissance

    SBC: NUMERICA CORPORATION            Topic: AF09BT11

    Space surveillance is the component of space situational awareness focused on the detection of resident space objects (RSOs) and the use of multisource data to track and identify space objects. While the propagation of the states of RSOs has been investigated extensively over the last fifty years, the correct propagation of their covariance or the more general (non-Gaussian) probability distribut ...

    STTR Phase I 2010 Department of DefenseAir Force
  3. Instrumentation for hypersonic, air-breathing engines

    SBC: Luna Innovations Incorporated            Topic: AF09BT32

    Luna Innovations Incorporated and CURBC (Calspan – University of Buffalo Research Center) are proposing to develop miniature, high-speed, high-temperature, fiber-optic pressure sensors that will fill the void that currently exists between ground and flight test instrumentation. The sensors small size (ø 0.007”) and high-sensitivity (better than ±0.01 psi) combined with a high-speed fiber-op ...

    STTR Phase I 2010 Department of DefenseAir Force
  4. Innovative Combat Simulation to Craft Tomorrow’s UAV Operational Doctrine

    SBC: John Tiller Software, Inc            Topic: AF09BT31

    This proposal is for the use of state-of-the-art computer wargames to be used in the research on the impact and optimal use of unmanned aerial vehicles (UAVs) in realistic combat scenarios. High fidelity, historically calibrated wargames ranging from sub-tactical ground-centric game engines through operational, strategic, air campaign, and naval-centric game engines will be used to address the fu ...

    STTR Phase I 2010 Department of DefenseAir Force
  5. Nanotechnology and Molecular Interconnects

    SBC: NEXGENSEMI CORPORATION            Topic: AF09BT35

    Graphene has become one of the most promising new materials to form semiconductor devices and microelectronic interconnects. NexGenSemi Corporation in collaboration with Sandia National Labs will develop a “Patterned Graphene Interconnect (PGI) and material modification for nanofabrication of transistor devices. This process resolution will dip deep down into the state-of-the-art technology no ...

    STTR Phase I 2010 Department of DefenseAir Force
  6. High Speed Nano-Infrared Spectroscopy

    SBC: Anasys Instruments Corp.            Topic: AF08BT30

    Anasys Instruments in collaboration with University of Illinois Urbana-Champaign and subcontractor Dr. Konstantin Vodopyanov propose to develop the world’s first high speed nano infrared spectroscopy (“NanoIR”) capability. By combining and extending the capabilities of infrared spectroscopy and atomic force microscopy, this breakthrough platform will provide sub-100 nm chemical mapping capa ...

    STTR Phase I 2010 Department of DefenseAir Force
  7. Aerosol Jet Printing of Single-Wall Carbon Nanotube Transistors on Plastic Substrate

    SBC: OPTOMEC, INC.            Topic: AF09BT26

    Aerosol Jet printing is proposed as a method for printing large area, CNT-based transistor arrays on flexible substrate. The teaming relationship combines expertise in high resolution printing along with device and materials expertise. All semiconductor, dielectric, and conductive materials comprising the TFTs will be solution processed and printed with a single machine. This will lead to a cos ...

    STTR Phase I 2010 Department of DefenseAir Force
  8. Improving Software and Data Security in Industrial Control Systems

    SBC: Pikewerks Corporation            Topic: OSD09T003

    Industrial Control Systems (ICS) are critical elements in electrical, water, oil/gas, and manufacturing services involving supervisory control and data acquisition (SCADA), distributed control systems (DCS), and programmable logic controllers (PLCs). These systems allow operators to monitor sensor data and remotely control field devices. Initially, these devices were designed for closed-network or ...

    STTR Phase I 2010 Department of DefenseAir Force
  9. High Energy Density Nanocomposite Based on Tailored Surface Chemistry

    SBC: TPL, Inc.            Topic: AF09BT05

    High energy density capacitors are required for practical implementation of GW-class pulse power loads. In response to this need, TPL has established unique dielectric and capacitor capabilities. Revolutionary materials, designs and manufacturing process have been developed for power sources that have potential for an order of magnitude reduction in mass and volume relative to current commercial ...

    STTR Phase I 2010 Department of DefenseAir Force
  10. Fusion of a Real-time Analytical Model with Facility Control Systems

    SBC: STREAMLINE AUTOMATION LLC            Topic: AF09BT16

    AEDC personnel have developed and demonstrated the effectiveness of coupling a control volume model with a wind tunnel control system. The performance of the model was hampered because parameters of the model were assumed to be constant, when they are likely variables. A method for using facility data to determine functional relationships defining these parameters would allow them to vary during ...

    STTR Phase I 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government