List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. HIGH FREQUENCY MAGNETOSTRICTIVE MOTOR

    SBC: Technical research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  2. AIR-SPARGED HYDROCYCLONE TECHNOLOGY FOR REMOVAL OF OIL AND AFFF FROM WASTE WATER

    SBC: Advanced Processing Tech.,            Topic: N/A

    It is difficult to remove oil and AFFF from voluminous streams. Research has been continously carried out to develop new technologies to be employed in this field of application with little success. Air-sparged hydrocyclone (ASH) flotation technology is a new technology developed by the University of Utah and Advanced Processing Technologies, Inc. It combines the advantages from both conventional ...

    SBIR Phase II 1996 Department of DefenseNavy
  3. Microscopic Batteries for Use in MEMs

    SBC: BIPOLAR TECHNOLOGIES            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  4. A Proposal to Develop an Automatic, Microfabricated Polymer Bilayer Air-Fluid Sampling Inlet

    SBC: Bomec, Inc.            Topic: N/A

    A critical component of a biochemical sensor system for detection and analysis of airborne pathogens are mechanisms for automated acquisition and transport of an air sample from the sensor inlet to the analysis chamber. While considerable capability already exists for sampling and handling of macroscopic volumes of gas, formidable technological challenges needed to be overcome before microfabrica ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  5. Study to define an unmanned vehicle based digital cellular telephone payload system

    SBC: Cerebral Developments, Inc.            Topic: N/A

    There has been continuous improvement in commercial Land Cellular telephone technology since deployment of the first analog system - Advanced Mobile Phone Service - in 1984. Each new generation of air interface embodies increasingly sophisticated signal modulation schemes providing improved spectrum utilization and network capacity. Today, a state-of-the-art commercial digital Cellular ...

    SBIR Phase I 1996 Department of DefenseAir Force
  6. Ion Propulsion for MEMS Flight Vehicles (rev 7-1)

    SBC: Daedalus Research Inc.            Topic: N/A

    A novel approach to the propulsion of very small, micro air vehicles is proposed in which electrostatic forces acting between an ion gas cloud and an appropriate anode are harnessed for thrust or lift. A means is proposed for the generation and maintenance of the ion gas from ambient air and for the regulation of the propulsor. Preliminary study indicates the new concept is valid only for air v ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  7. Microwave Removal/Conversion of High Explosives From Loaded Munitions

    SBC: El Dorado Engineering, Inc.            Topic: N/A

    The U.S. Department of Defense currently has ever 3,000,000 short tone Of CONUS munitions that have been declared obsolete and are awaiting disposal. Current demilitarization techniques include open detonation and traditional washout methods or meltout. Open detonation includes uncontrolled air emissions, and is unpopular with the general public; traditional washout or meltout methods may requir ...

    SBIR Phase I 1996 Department of DefenseNavy
  8. Target Discrimination Techniques for Infrared Search and Track

    SBC: Jeffery Bell            Topic: N/A

    The purpose of this Phase I of fort is to develop an advanced IRST discrimination algorithm by applying a newly developed mathematical technique to tracking filters and thus exploiting the reduced 'tracking error in the predicted position to better reject false detections. 'the new filter concept is founded on penetrating implicit (and presumably heretofore unrecognized) assumptions upon ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. A Solid FreeForm Fabrication Process to Produce Functional Metal Parts and Tools

    SBC: LONE PEAK ENGINEERING COMPANY            Topic: N/A

    The supply of critical replacement parts to maintain the readiness of military units serving overseas can be a problem. Lone Peak Engineering (LPE) has identified an opportunity to develop a solid freeform fabrication (SFF) process to manufacture functional metal components. These metal components, prepared in a manner of hours from computer-generated models without hard tooling could be quickly ...

    SBIR Phase II 1996 Department of DefenseNavy
  10. Modeling the Powder Injection Molding Process for Defect-Free, Net-Shape Metal and Ceramic Components.

    SBC: LONE PEAK ENGINEERING COMPANY            Topic: N/A

    The Army has identified a need for process innovations that would support the production of components for light weight vehicles out of advanced materials. The use of advanced, lightweight structural materials in vehicular applications presents an opportunity to enhance the effectiveness of Army units. Through more effective energy utilization, fuel will be conserved, which will simplify the log ...

    SBIR Phase I 1996 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government