Award Data

N/A

The detection and recognition of man-made objects under foliage conditions requires the use of VHF/UHF ultra-wideband (UWB) radars such as P-3/SAR system developed by ERIM for NAWC/AD and DARPA. At low frequencies and long wavelengths, most of the scatters are in the Rayleigh scattering region and their RCS is low, which enables foliage penetration. However, this also results in a small number o ...

The overall goal of the proposed effort is to develop a fusion process that integrates SAR and hyperspectral sensor data in order to overcome the current performance limitations of single sensor automatic target cueing. In the Phase I effort, we will define a concept of operation for SAR/hyperspectral automatic target cueing. The nature of the imaging domains of SAR and HS sensor as well as the ...

N/A

N/A

N/A

It is proposed to evaluate the feasibility of affordable fuel cells of simple design, having energy densities of 6 to 7 MJ/kg and about 3 Mj/liter, as candidates for the power supply in micro air vehicles. The feasibility of mass producing Fly-on- the-Wall- sized fuel cell power supplies will be determined from product and manufacturing design studies and by testing the product made from tempora ...

Currently available rad curable resins such as acrylates are inhibited by oxygen in ambient air, lack thermal stability and have poor fracture toughness. Recent Rad curable BMIs and epoxies suffer from voids due to lack of processability. Aeroplas Corporation International (ACI) proposes to demonstrate and further develop their line of atomic oxygen resistant (AOR) E-Beam curable composite resin ...

A radical, high performance system design concept for UAV missions is proposed. Its characteristics derive directly from propulsion and power generation capabilities inherent in microturbine technology under development at MIT. The proposed vehicle configurations is an oblate spheroid, giving a high package volume with sufficient fuel capacity for hover duration of about one hour. Thrust from m ...

A one watt 94 GHz power amplifier with >2 GHz bandwidth will be designed, and an operational brassboard model fabricated. The approach is based upon power combining of four single-diode silicon IMPATT amplifier modules using magic-tees. The brassboard model will serve as a developmental unit during Phase II in which a product development effort will lead to a production version. Also on Phase I ...