You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: Space Information Laboratories, LLC Topic: N15AT001
An advanced Li-Ion Battery Management System for DOD mission and safety critical platforms. The majority of Li-Ion Battery Management Systems (BMS) for DoD aircraft, helicopter, and directed energy weapons are custom designs for the individual Aerospace platform. This leads to increased cost over the battery life cycle due to the requirement to maintain the production facilities which produce repl ...STTR Phase II 2017 Department of DefenseNavy
SBC: Cognionics, Inc. Topic: A16AT014
This Phase I STTR project will develop a platform to demonstrate high-quality, multi-modal acquisition of neurophysiological signals, including EEG, heart rate/blood oxygenation via photoplethysmography (PPG), electrodermal (EDA) activity, temperature plus environmental factors such as ambient light and sound in a simple, wearable headband. The hardware will be coupled with the development of a cl ...STTR Phase I 2016 Department of DefenseArmy
Validation Experiments to Measure Transient Aerothermoelastic Response of a Curved Panel to Hypersonic FlowsSBC: Metrolaser, Inc. Topic: AF16AT24
An experiment to obtain validation data on the transient aerothermoelastic response of a curved panel in hypersonic flows will be designed and evaluated for its feasibility. Significant challenges must be overcome for a successful experimental campaign i...STTR Phase I 2016 Department of DefenseAir Force
SBC: NESS ENGINEERING, INC. Topic: A14AT004
The objective of this Phase II proposal is to continue the development of a Photoconductive Semiconductor Switch (PCSS) with an integrated optical trigger that can switch at least 30 kV, 1 kA, 20 ns pulses with jitter 108 shots. Ness Engineering, Inc. (NEI) and Texas Tech University (TTU) propose to utilize wide bandgap materials to demonstrate lock-on switching and allow much less optical trigger ...STTR Phase II 2016 Department of DefenseArmy
SBC: Global Aerospace Corporation Topic: AF16AT24
The Air Force is interested in developing technology that would enable long duration hypersonic flight with reusable aircraft. Hypersonic flow presents many design challenges that can be encapsulated into an aerothermoelastic problem, i.e., a complex dyn...STTR Phase I 2016 Department of DefenseAir Force
SBC: MRV SYSTEMS LLC Topic: N14AT020
This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...STTR Phase II 2016 Department of DefenseNavy
SBC: ATTOLLO ENGINEERING, LLC Topic: AF16AT22
Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid cr...STTR Phase I 2016 Department of DefenseAir Force
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitionsSBC: MAKEL ENGINEERING INC Topic: DTRA16A001
This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
Parallel Two-Electron Reduced Density Matrix Based Electronic Structure Software for Highly Correlated Molecules and MaterialsSBC: Q-CHEM, INC. Topic: A14AT013
Variational two-electron reduced-density-matrix (v2RDM) methods can provide a reference-independent description of the electronic structure of many-electron systems that naturally captures multireference correlation effects. These methods offer one of the few possible routes to performing the large-active-space computations that are necessary for the qualitative description of strongly-correlated ...STTR Phase II 2016 Department of DefenseArmy
SBC: Pranalytica, Inc. Topic: A14AT015
In response to the Army STTR Topic A14A-T015 solicitation for tunable high-power LWIR lasers for standoff detection applications, Pranalytica proposed to develop a compact, rugged and highly reliable wavelength tunable quantum cascade laser (QCL) module delivering over 5W of peak power and over 0.5W of average power in the spectral region spanning from 7 to 11m. The proposed approach is based on a ...STTR Phase II 2016 Department of DefenseArmy