You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraft maritime operation in support of Anti-Submarine Warfare (ASW). The vibratory rotary wing platform combined with the long and flexible towing cable, the low mass ratio of the towed body to the total mass (the sum of the tow body and the towing aircraft), and the rotor downwash impingement on the towed body duri ...

    STTR Phase I 2015 Department of DefenseNavy
  2. Reliable Manufacturing of Scandia-Doped Tungsten Powders for Thermionic Cathodes

    SBC: NGIMAT, LLC            Topic: N15AT010

    In this STTR effort nGimat will partner with the University of Kentucky to develop a new process for manufacturing scandia-doped tungsten powder for use in vacuum tube cathode devices. While a significant amount of research over the last several decades has shown promise for scandate cathode materials, reliable manufacturing processes that enable commercialization of this technology have remained ...

    STTR Phase I 2015 Department of DefenseNavy
  3. Nanocomposite Scandate Tungsten Powder for High Current Density and Long Life Thermionic Cathodes

    SBC: Vacuum Process Engineering, Inc.            Topic: N15AT010

    Vacuum Process Engineering Inc. in collaboration with the UC Davis millimeter wave research group proposes to develop a large scale production process for nanocomposite scandate tungsten powder for advanced high current density and long life thermionic cathodes that have been previously demonstrated by UC Davis to be superior to the commercially available state-of-the-art. The produced cathodes de ...

    STTR Phase I 2015 Department of DefenseNavy
  4. Object Cueing Using Biomimetic Approaches to Visual Information Processing

    SBC: MAYACHITRA, INC.            Topic: N14AT008

    Thousands of years of evolution have produced the human vision system that computers cannot replicate well. Humans are still unsurpassed in their ability to search for objects in visual scenes. To successfully detect objects in cluttered scenes, the human brain is thought to rely on multiple factors: prior probabilities of object occurrence, global scene statistics and object co-occurrence. Machin ...

    STTR Phase II 2015 Department of DefenseNavy
  5. Hybrid High Ampacity Electric Power Cable

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: N15AT016

    The Navy is interested in developing hybrid superconducting power transmission cables that would carry at least 5 kA of current and have a current density of at least 35 MA/m2. The cable should be able to carry 30 % of the rated current even when the superconducting cable fails. We propose to develop a hybrid superconducting cable, based on CORC cables, which potentially have a current density of ...

    STTR Phase I 2015 Department of DefenseNavy
  6. Aircraft Carrier-based Precision Ship-Relative Navigation Guidance for Aircraft Landing under Emissions Control Conditions

    SBC: COHERENT TECHNICAL SERVICES, INC.            Topic: N15AT014

    This research will show how data-capable laser communication retro-reflectors integrated with multispectral image processing can provide extreme reliability positioning suitable for full time automatic landing aboard ship of piloted fixed wing aircraft. The positioning system supports the SALRS long-term objective to reduce or eliminate pilot training to perform manual landing aboard ship includin ...

    STTR Phase I 2015 Department of DefenseNavy
  7. In situ NDI and correction of the AM process with laser SAW and heterodyne detection

    SBC: POLARONYX INC            Topic: N15AT008

    This Navy STTR Phase I proposal presents an unprecedented NDI tool to support laser additive manufacturing of metal parts by using fiber laser SAW and heterodyne detection. It is the enabling technology for real time characterize the AM parts in terms of temperature, cooling rate, grain structure, and defects. A proof of concept demonstration will be carried out at the end of Phase 1.Prototypes wi ...

    STTR Phase I 2015 Department of DefenseNavy
  8. Innovative Physics-based Modeling Tool for Application to Passive Radio Frequency Identification System on Rotorcraft

    SBC: MATHEMATICAL SYSTEMS & SOLUTIONS INC            Topic: N15AT005

    We propose development of a software capability which, based on use of MathSysaccurate and efficient exact-physics computational electromagnetics (CEM) solvers, will enable modeling and optimization of the properties of on-platform pRFID tag/reader antenna systems. Passive Radio Frequency Identification devices (pRFID) mounted on complex rotorcrafts pose challenging modeling problems: since pRFID ...

    STTR Phase I 2015 Department of DefenseNavy
  9. Novel Approach to Hybrid High Temperature Superconducting Cable

    SBC: TAI-YANG RESEARCH CO            Topic: N15AT016

    To handle the so-called black start fault contingency, Energy to Power Solutions proposes the use of a novel hybrid cable design. The cable would be designed to handle the full 100 % electric power load under normal operating and battle conditions (i.e. a fully/partially functioning cryogenic cooling system operating at cryogenic temperatures ~ 50-60 K), and capable of handling 30 % of the rated p ...

    STTR Phase I 2015 Department of DefenseNavy
  10. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS INC            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase I 2015 Department of DefenseNavy
US Flag An Official Website of the United States Government