You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Isolator for Fiber Laser Amplifier Arrays
SBC: ADVALUE PHOTONICS INC Topic: AF093008High power fiber lasers have made significant progress in last several years. Several kW of output power has been demonstrated, which enables a wide range of new applications from laser welding, laser cutting, and laser drilling to military defense. While high power fiber lasers have been successfully deployed in industry, one piece of critical components, fiber isolator, is still not available. F ...
SBIR Phase I 2010 Department of DefenseAir Force -
Innovative Eye-Safe Wavelength High Power Fiber Laser
SBC: ADVALUE PHOTONICS INC Topic: A10028High power fiber lasers have made significant progress in the last several years. Ten kW of diffraction-limited output power at 1 micron from one single mode fiber has been demonstrated. Department of Defense (DoD) needs 100s of kW for missile defense as well as for protection against rockets, artillery, and mortars (RAM). There is serious concern about current 1 micron fiber laser system potentia ...
SBIR Phase I 2010 Department of DefenseArmy -
A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys
SBC: ALPHASENSE, INC. Topic: N09T022In phase I, we have proven the feasibility of using the microwave cavity perturbation technique to detect and quantify DoS in marine aluminum alloys. We implemented an alpha version sensor prototype, characterized and validated its performance using ASTM G67 method. We also identified methods to further enhance the sensor sensitivity, so that DoS in the low (a few mg/cm2) to moderate range can be ...
STTR Phase II 2010 Department of DefenseNavy -
A Novel Automated and Controlled Dual Laser Ablation System for Selective Removal of Thermal Barrier Coatings
SBC: ALPHASENSE, INC. Topic: AF093120Thermal barrier coatings have been widely used to provide thermal protection to superalloy components in gas turbine engines. After certain amount of service time, the coating experiences a reduction in thickness by processes such as wear, erosion and foreign/domestic object damage. When the thickness decreases below a critical value, the thermal barrier effect provided by the coating is no longer ...
SBIR Phase I 2010 Department of DefenseAir Force -
A Compact, Low Cost, Handheld Sensor for Non- Destructive Material Case Depth Verification
SBC: ALPHASENSE, INC. Topic: N102141In this proposal, AlphaSense, Inc. and the Center for Non-destructive Evaluations at Iowa State University detail the development of a compact, low cost handheld sensor for non-destructive material case depth verification. The key innovations of this proposal include the following: a) case depth evaluations based on electromagnetic property measurements, b) a model based alternating current potent ...
SBIR Phase I 2010 Department of DefenseNavy -
Compact, Low Cost, MEMS Hotplate Sensors for Battery Offgassing Analysis
SBC: ALPHASENSE, INC. Topic: N101056In this proposal, Alphasense Inc. and the Institute for MEMS and VLSI technologies at the George Washington University detail the development of compact, low cost MEMS microhotplate sensors for battery offgassing analysis. Key innovations of the proposed sensor include: a) the application of metal oxide coated microhotplates to ensure high sensitivity and stability, b) the application of a bi-laye ...
SBIR Phase I 2010 Department of DefenseNavy -
A Handheld Sensor for Amorphous Coating Integrity Evaluation
SBC: ALPHASENSE, INC. Topic: SB093002Under the DARPA sponsored Naval Advanced Amorphous Coating (NAAC) program, a novel, thermal sprayed amorphous metal coating has been developed. Such a coating has demonstrated superior mechanical and corrosion resistance properties. Although the coating is designed to be life-of-ship, the application and operational conditions may compromise the integrity of the coating. For example, the applicati ...
SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency -
Ultra Low Power, High Performance Microprocessor Core for Military and Space Applications
SBC: American Semiconductor, Inc. Topic: AF093082For Phase I, an ultra low power, high performance microprocessor core using a combination of double-gated and independent double-gated Flexfet™ SOI CMOS technology from American Semiconductor will be designed to address the requirements of military and space communication systems. High integration feasibility using Flexfet technologies followed by confirmation of the power and performance improv ...
SBIR Phase I 2010 Department of DefenseAir Force -
DIPAIN-Based Handheld Assay for the Detection of T-2 Toxin in Water Using a Handheld Reader
SBC: ANP TECHNOLOGIES INC. Topic: A10AT021A rapid assay for the detection of T2 trichothecene mycotoxin in water is proposed that will use ANP Technology, Inc.'s established handheld reader and rapid acetylcholinesterase (AChE) inhibitor test ticket format. Dipain-II and other candidate Dipain derivatives will be immobilized on cellulose and other solid supports mounted as discs in wells on the existing test ticket, similar to the AChE i ...
STTR Phase I 2010 Department of DefenseArmy -
Advanced Dielectric Insulation Techniques for High Voltage Pulsed Power Systems
SBC: Applied Energetics, Inc. Topic: AF093014Current state-of-the-art, high voltage, pulsed power systems designed to drive high power microwave (HPM) sources utilize Marx generator designs. The high voltage insulation of these devices has been traditionally based on either high dielectric strength oil or sulfur hexafluoride (SF6). The dielectric strength of the insulating medium determines the minimum size of the tank enclosure of the Mar ...
SBIR Phase I 2010 Department of DefenseAir Force