You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 71 - 80 of 4081 results
  1. Adaptive Radar Detection Approaches for Low-RCS Maritime Vessels in Highly Variable Clutter Conditions

    SBC: Arete Associates            Topic: N141067

    Arete Associates proposes a Phase I effort to develop a radar mode that leverages a long coherent integration times to improve the detection of small boat targets in maritime environments up to sea state 4. The overall objective of this SBIR project is to then integrate these techniques and necessary algorithms into an end-to-end radar system signal processing system. The Phase I base effort will ...

    SBIR Phase I 2014 Department of DefenseNavy
  2. Adaptive Training Protocols (ATP)

    SBC: CHARLES RIVER ANALYTICS, INC.            Topic: N172132

    Marine physical fitness is a core element of force readiness: toward an end state of a healthy and fit force able to better answer the call in any clime and place (ALMARS 022/116). Marine physical training programs must be tailored to individuals in order to maximize the physical potential of every Marine. To meet this need, Charles River Analytics proposes to design and demonstrate a prototype sy ...

    SBIR Phase I 2018 Department of DefenseNavy
  3. Adaptive UGV Routing via Object Recognition and Analysis (AURORA)

    SBC: CHARLES RIVER ANALYTICS, INC.            Topic: OSD141AU5

    The Army has identified a need to develop a system that can identify, classify, and analyze visual data from unmanned ground vehicle (UGV) and stationary visual surveillance sources to enable real-time decisions and system-wide planning regarding route, speed, and tasks on board UGVs. We propose to design and develop a system for Adaptive UGV Routing via Object Recognition and Analysis (AURORA). A ...

    SBIR Phase I 2014 Department of DefenseArmy
  4. Adaptive Visualization of Social Networks (ADVIS)

    SBC: Perceptronics Solutions, Inc.            Topic: ST12A004

    This proposal is to extend into Phase II our development of a new system for Adaptive Visualization of Social Networks (ADVIS). Recent years have seen a dramatic increase in the collection and study of social network data. Numerous social network visualizations have been developed to support user exploration and understanding of these data. However even in the few best systems, cognitive and de ...

    STTR Phase II 2014 Department of DefenseDefense Advanced Research Projects Agency
  5. Additively Manufactured Dynamically Adjustable Venturi

    SBC: PARABILIS SPACE TECHNOLOGIES INC            Topic: H10

    Parabilis Space Technologies is pleased to propose development of a novel additive manufacturing based design which enables creation of a dynamically-adjustable, in-line, cavitating flow-control and measurement venturi for use in advanced propulsion system ground testing. This innovative capability dramatically adds to and extends the advantages of using a cavitating venturi to isolate combustion ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Additively Manufactured Engineered Molds For Investment Cast Turbine Airfoils Using Ceramic Stereolithography

    SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC.            Topic: AF141151

    ABSTRACT: In this Phase I SBIR project TA & T will use ceramic stereolithography to fabricate engineered molds for investment cast turbine airfoils with the goals of reduced dimensional and metallurgical variability, finer cast features, and improved yield. The application target will be advanced high pressure turbine (HPT) airfoils cast in single crystal superalloys, the most difficult to fabri ...

    SBIR Phase I 2014 Department of DefenseAir Force
  7. Additively Manufactured Fractal Heat Exchanger

    SBC: PHYSICAL SCIENCES INC.            Topic: AF173006

    Physical Sciences Inc. (PSI) will develop an innovative refrigeration condenser for airborne applications based on PSIs established fractal heat exchanger geometry. This configuration is 60% smaller and 20% lighter than comparable heat exchangers because it uses a branched feed network instead of pipe headers (the heaviest parts of existing heat exchangers).Test articles will be produced with a vo ...

    SBIR Phase I 2018 Department of DefenseAir Force
  8. Additively Manufactured Liquid Injection Thrust Vector Control System

    SBC: PARABILIS SPACE TECHNOLOGIES INC            Topic: S4

    Parabilis Space Technologies is pleased to propose the development of a Liquid Injection Thrust Vector Control (LITVC) system integrated into a regeneratively cooled, additively manufactured nozzle in response to solicitation S4.03, Spacecraft Technology for Sample Return Missions. The use of additive manufacturing and regenerative cooling prevents nozzle erosion near the injection ports, enables ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. Additive Manufacture of Respiratory Protection

    SBC: AKITA INNOVATIONS LLC            Topic: CBD181001

    In the proposed SBIR project Akita Innovations and Adaptive 3D will develop feedstock materials and methods for the additive manufacture of soft elastomers that exhibit resistance to the permeation of chemical agents.The goal of the effort is to produce a fully functional Air Purifying Respirator (APR) and to demonstrate advantages of additive manufacturing to provide innovations such as custom si ...

    SBIR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  10. Additive Manufacturing for Affordable Missile Defense

    SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC            Topic: MDA16013

    The efforts will leverage advanced multi-scale material modeling, multi-physics additive manufacturing (AM) simulation technologies to suggest optimized AM process and build parameters before printing in an attempt to deliver quality Direct Metal Laser Sinteringparts.Components/materials fabricated will meet MDA/Raytheon specifications. The qualification of each component will be shown by DOE, and ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government