Award Data

ABSTRACT: Optical Sciences Corporation (OSC) and the University of Alabama in Huntsville"s Center for Applied Optics (UAH/CAO) will demonstrate the feasibility and present a plan for developing optical instrumentation for the monitoring, mitigation, and removal of cryodeposits accumulated on optical and mechanical surfaces in cryogenic-vacuum radiometric calibration chambers. OSC will investigat ...

In Phase I, ISSI will design and demonstrate a laser absorption-based sensor for time-resolved measurements of combustion fuel/product concentrations (H2O, CO, CO2 and fuel) and gas temperature within the detonation channels and nozzle exit-plane of a rotating detonation rocket engine (RDRE). The goal of this STTR is to develop a single sided sensor that plugs into the outer wall of the RDRE simil ...

The objective of this proposal is to demonstrate the feasibility of producing an automated delayering and imaging system with end point detection, material density detection with built in neural network error correction. This process, coined fast Automated Delayering-Image Capture System (ADICS) leverages off of the existing Pix2Net which is a proven automated imaging 3D microchip reconstruction ...

Locating objects that vibrate is a way to discern potential threats and locate targets. However, current vibrometry technology typically measures only the global vibration of target and cannot create an extended spatial measurement of the vibration profile of the target. These solutions cannot identify what the target is, nor can they locate potential weak spots on the target, because they lack sp ...

Efficient design, build, and test of an HEL system leverages modeling and simulation (M&S) to reduce cost and increase robustness. Designers use models to explore parameter variations and to estimate performance in conditions which cannot be tested due to physical or financial constraints. This provides significant savings in cost and time. Because live testing is so expensive, it is best used as ...

We will develop hybrid wave propagation approach that implements FFT and EMA (Efficient Matrix Algorithms) propagators in a fashion that is transparent to the user but insures the highest efficiency and accuracy for a given propagation problem. We will develop rules to decide which propagation approach is ideal for a given situation. The propagation algorithms will be coded in Vulkan/CUDA and C++ ...

The proposed effort aims to deliver a novel process model for carbon-carbon manufacturing to determine thermo-mechanical properties of these materials and their components, thereby enabling a faster cycle for material development for hypersonic platforms. The proposed solution consists of (1) requirement and functionality analyses, (2) a six-level model representing the key steps of the manufactur ...

hazardous chemicals such as JP8, chromium, and byproducts of led-free frangible ammunition and to hazardous environments. Of the many dangers Airmen face, the hypoxia-like unexplained physiological events pilots face are some of the most dangerous and elusive. Current wearable sensors cannot decouple complex, interdependent in vivo response. We propose to develop (design, fabricate, test, and demo ...

Metamaterials and photonic crystals are engineered composites that exhibit novel and interesting properties not found using ordinary materials. They have been shown to allow extraordinary control over the electromagnetic field, including molding the flow of energy, amplitude profile of the field, phase of the waves, intermodal coupling, and more. To achieve such control, a set of tools and procedu ...

The DoD lacks an multi-level security (MLS) cyber information management (CIM) system capable of collecting, sharing and disseminating cyber information containing threats, system vulnerabilities and mission impacts and risks for systems operating at multiple security levels. A system that can securely collect and persist this information from various systems operating at various security levels i ...