You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. W-Band RF Instrumentation

    SBC: SRICO INC            Topic: A18BT002

    W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...

    STTR Phase I 2019 Department of DefenseArmy
  2. W-Band RF Instrumentation

    SBC: MAGIQ TECHNOLOGIES, INC.            Topic: A18BT002

    In the program, MagiQ Technologies Inc., in conjunction with professor Gabriel Rebeiz from the University of California, San Diego (UCSD), is proposing a high dynamic range W-band CW/pulse RF power meter for the US Army’s application in the development of W-band radar and satellite communications. Base on unique noise reduction technique in MagiQ technologies, The power meter can operate in a hi ...

    STTR Phase I 2019 Department of DefenseArmy
  3. RODEO: Roll-Over Detection for Equipment-transporter Operation

    SBC: Intelligent Automation, Inc.            Topic: A18BT025

    To gain tactical advantages over adversaries in dismounted operations, infantrymen are often required to carry heavy loads on themselves. However, enduring a long distance walk while carrying a heavy march load is notorious for quickly exhausting the Solider, which consequently impedes the OPTEMPO of the troop. Addressing this problem, the Army is seeking a robust unmanned ground vehicle that can ...

    STTR Phase I 2019 Department of DefenseArmy
  4. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: NOVAA LTD            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  5. Universal textile functionalization chemistry for molecular and particulate attachment based on a novel activation treatment

    SBC: Nano Terra, Inc.            Topic: A18BT024

    Nano Terra and the El-Shafei group (North Carolina State University) propose to demonstrate, optimize and expand a universal platform for textile functionalization. The approach is one developed in the El-Shafei group that has already been explored for its utility in cotton, nylon-cotton blends and polypropylene. The functionalization method imparts a high-level of flame retardancy (without haloge ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Scalable Biological Agent Detection Network

    SBC: PHYSICAL SCIENCES INC.            Topic: A17AT020

    Physical Sciences Inc., in cooperation with University of Notre Dame, will develop a method for the persistent detection of aerosolized biological warfare agents using a distributed and cooperative sensor network within a Bayesian framework. The proposed system, named BioNet, will provide a wider coverage and two-fold reduction in false alarm rate over individual sensor performance through intelli ...

    STTR Phase II 2019 Department of DefenseArmy
  7. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA RESEARCH, INC.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Compact and Efficient Membraneless Water Purification

    SBC: LYNNTECH INC.            Topic: A18BT005

    Local water production for troops using standard membrane filtration processes presents a significant logistics burden because of high energy consumption for removing particles based on size-exclusion methods and the constant need to replace fouled membranes. A membraneless filtration method using dissolved CO2 has been demonstrated to separate charged particles through the mechanism of diffusioph ...

    STTR Phase I 2019 Department of DefenseArmy
  9. Multiferroic Materials for RF Applications

    SBC: WINCHESTER TECHNOLOGIES LLC            Topic: ST13B003

    Built upon the progress in Phase I period, Winchester Technologies, LLC is pleased to propose to investigate practical magnetoelectric antennas during the Phase II period based on solidly mounted resonators (SMR), which will have enormous impacts on DoD and civilian antenna applications. State of the art antennas suffer from three major open challenges: (1) large antenna size > ?0/10, (2) antenna ...

    STTR Phase II 2019 Department of DefenseArmy
  10. Additive Manufactured Smart Structures with Discrete Embedded Sensors

    SBC: 3DFlexible Inc            Topic: A17AT024

    Recent advances in 3D structure printing and 3D direct printed electronics have widened the scope of possibilities for the Internet of Things (IoT). New near room temperature 3D direct ink writing (DIW) additive manufacturing (AM) printing processes allow many different type of sensors and they can be embedded anywhere in a structure, which offers several benefits. 1. Protection: sensors face degr ...

    STTR Phase II 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government