Award Data

The NAVY solicits new non-destructive inspection (NDI) methods to address detection and evaluation of kissing bonds and bondline integrity in aerospace composites since no currently accepted standard exists. In response AS & T Inc. propose, the Conformal Array Laser Imager for Bondline Evaluation and Repair (CALIBER), designed expressly for this purpose. The novelty of the proposed approach lies i ...

Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

The objective of Phase I is to identify the strengths and weaknesses of the various multi-reference coupled-cluster (MRCC) methods that have been proposed for the description of molecular states depending upon near degeneracies and non-dynamic electron correlation. Such effects are encountered in bond breaking, at transition states, for complex open shell systems like transition metal atoms, and f ...

The rotorcraft aerodynamic interaction is a complicated problem and remains an extremely challenging aspect of rotorcraft analysis. This STTR is dedicated to developing a solution for the complicated rotorcraft aerodynamic interaction problem. The Phase I research coupled a state-of-the-art vortex particle method (VPM) with an unstructured Navier-Stokes CFD body surface solver and prototyped a hyb ...

ABSTRACT: Optical Sciences Corporation (OSC) and the University of Alabama in Huntsville"s Center for Applied Optics (UAH/CAO) will demonstrate the feasibility and present a plan for developing optical instrumentation for the monitoring, mitigation, and removal of cryodeposits accumulated on optical and mechanical surfaces in cryogenic-vacuum radiometric calibration chambers. OSC will investigat ...

Military shelters currently use electrically driven Environmental Control Units (ECUs) to provide cooling for the air inside the shelter. The ECU is vapor compression cycle powered by a diesel generator, operating on JP-8 fuel. Other than fueling jet engines, the largest drain on U.S. military fuel supplies in current operations comes from running generators at forward operating bases. In hot cli ...

Modern processor design is trending increasingly toward multicore architectures. This is problematic for programmers because writing a correct parallel program is known to be difficult compared to writing the equivalent sequential program. Additionally, a wide body of sequential code has already been developed that cannot exploit the power offered by these new cores because it was written in a s ...

In response to SBIR topic MDA09-T006, USCI proposes to develop the first medium-level integrated circuit for radiation-tolerant applications. The advanced integrated circuit will be demonstrated based on a novel yet simple design SiC transistor that has the potential to provide a factor of 10X improvement in performance comparison to state-of-the-art. The SiC transistor can be fabricated by a subs ...

FuelCell Energy, Inc., in collaboration with the University of Minnesota, is proposing to develop an innovative fuel processor for person-portable fuel cell power system applications. The system will be designed to reform butanol into a hydrogen-rich stream suitable for use in a low-temperature Proton Exchange Membrane (PEM) fuel cell. The technical approach will focus on the development of a no ...

This proposal is being submitted in response to the solicitation topic N10A-T002 (Development of a Computational Method for Prediction of After Burning Effect) by BUSA Engineering Consulting (Dr. Jianghui Chao) in collaboration with University of Florida (PI: Prof. S. Balachandar). The overall objective of the proposed effort is to contribute to national defense and security by advancing the state ...