You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Integrated learning-based and regularization-based super resolution for extreme MWIR image enhancement
SBC: OPTO-KNOWLEDGE SYSTEMS INC Topic: N17AT016OKSI and Northwestern University propose to develop a super-resolution (SR) methodology for mid-wave infrared (MWIR) imagery that produces extreme enhancement of low resolution images. Image enhancement of at least 4x is expected using a standard imaging system. OKSI and Northwestern University will also develop a detector-limited imaging system specifically designed to be used with the SR methodo ...
STTR Phase I 2017 Department of DefenseNavy -
Integrated photonic Raman sensor on a chip
SBC: PARTOW TECHNOLOGIES LLC Topic: N19AT023A photonic integrated spectrometer based on high-index contrast thin film platform is proposed for Raman signal processing. Raman signal generation on the chip via waveguide collection integrated with a spectrometer is proposed to increase the efficiency and signal to noise ratio and significantly reduce cost and the size of Raman sensor systems. All components of the proposed Raman detection syst ...
STTR Phase I 2019 Department of DefenseNavy -
Intelligence and Intuition for Enhanced Decision Making (I2EDM)
SBC: MODUS OPERANDI, INC. Topic: N13AT024The focus of our Intelligence and Intuition for Enhanced Decision Making (I2EDM) Phase 1 research is to provide efficient and timely automated production and dissemination of information products in support of doctrinal Decision Points for the Company and below in austere environments. Operating in the Cloud, I2EDM will continuously fuse tactical information with human intuition and experience to ...
STTR Phase I 2013 Department of DefenseNavy -
Interlaminar Mode I and Mode II Fracture Toughnesses in Ceramic Matrix Composites (CMCs)
SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC Topic: N13AT008Ceramic Matrix Composite (CMC)'s are highly susceptible to interlaminar shear failure at elevated temperatures. Therefore, interlaminar properties, critical design limitation of CMC should be assessed accurately with appropriate test methods to ensure overall structural reliability/integrity of components in Naval gas turbine engines. AlphaSTAR proposes to develop rigorous, precise, and innov ...
STTR Phase I 2013 Department of DefenseNavy -
Large Eddy Simulation (LES) Flow Solver Suitable for Modeling Conjugate Heat Transfer
SBC: Kord Technologies, Inc. Topic: N19BT027Accurate prediction heat transfer in gas turbine components subject to cooling requires high fidelity modeling of heat transfer in the presence of high Reynolds number turbulent flow. The cooling internal to the blades results in sustained temperature gradients within the structural parts, from low temperature in the interior of the structure to increasingly higher temperature closer to the surfac ...
STTR Phase I 2019 Department of DefenseNavy -
Low-Cost Ball/Air/Magnetic Hybrid Bearing System for Extended-Life Micro Gas Turbine Engines
SBC: Nastec, Inc. Topic: N10AT037A unique type of air lubricated thrust bearing called a Wave Bearing is proposed to assist a rolling element bearing to carry the thrust load and to improve the bearing’s life when used in a micro gas turbine engine. The Wave Bearing technology will provide improved reliability, safety and life compared to rolling element bearings used alone, as well as to allow simplification of engine design a ...
STTR Phase I 2010 Department of DefenseNavy -
Low Cost OPAM for sea mine detection
SBC: QUSPIN INC. Topic: N17AT013Optically pumped magnetometers provide very high performance but they cost tens of thousands of dollars, and they are large and power hungry. Recently we successfully developed and commercialized laser pumped magnetometers with size, weight and power consumption that is an order of magnitude below current state-of-the-art without sacrificing performance. In this project, the focus will be on produ ...
STTR Phase I 2017 Department of DefenseNavy -
Maneuver Prediction and Avoidance Logic For Unmanned Aircraft System Encounters with Non-Cooperative Air Traffic
SBC: NUMERICA CORPORATION Topic: N13AT003For Unmanned Aircraft Systems (UAS) to operate seamlessly in both the U.S. National Airspace System (NAS) and abroad, it will be crucial that they possess a sense-and-avoid (SAA) capability that can ensure safe operations among maneuvering, non-cooperative aircraft. Numerica Corporation, in partnership with Johns Hopkins University, proposes to develop a set of algorithms to model the uncertaintie ...
STTR Phase I 2013 Department of DefenseNavy -
Mask integrated Volatile Organic Compound (VOC) sensor for real-time warfighter physiological status monitoring in extreme and toxic environments
SBC: BAYSPEC, INC. Topic: DHP16C002BaySpec Inc., in collaboration with Pacific Northwest National Laboratory, proposes to develop an innovative orthogonal sensor systemthat would be able to detect, identify and quantify the inorganic components of breathing mixes, (i.e., nitrogen, oxygen, carbon dioxide, argon, helium, and water vapor), as well as individual detectable VOCs within the exhaled breath in real-time. The Phase I resear ...
STTR Phase I 2017 Department of DefenseDefense Health Agency -
Mechanical Property Characterization and Modeling for Structural Mo-Si-B Alloys for High Temperature Applications
SBC: Imaging Systems Technology, Inc. Topic: N13AT012Under this STTR, Imaging Systems Technology (IST) in cooperation with Georgia Institute Technology (GIT) will develop and mature models to predict mechanical properties of refractory alloys with an eye toward tailoring these alloys for specific applications. In particular, this research will focus on addressing core aspects of Integrated Computational Materials Engineering (ICME) as it applies to ...
STTR Phase I 2013 Department of DefenseNavy