You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Advanced Ionospheric Monitor using a High-sensitivity Imager (AIM-HI)
SBC: ALO, INC. Topic: AF071290The objective of this proposal is to conduct a detailed design study in Phase I for the next generation space-based FUV imaging sensors that will yield key ionospheric parameters necessary for use with the forecasting models. At the end of Phase I, the design of Advanced Ionospheric Monitor using a High-sensitivity Imager (AIM-HI) is expected to be matured to a point that an engineering model coul ...
SBIR Phase I 2007 Department of DefenseAir Force -
Advanced 50-kW Thermal Management System Demonstration
SBC: TIAX LLC Topic: OSD06EP8This proposal addresses the need for a compact thermal management system for cooling of high-heat-flux surfaces of DEW weapons systems which uses polyalfaolefin (PAO) fluid to transport system heat to ram air. TIAX proposes to develop a compact thermal management system technology based on the use of carbon dioxide refrigerant and the direct use of CO2 refrigerant and the PAO coolant for the two ...
SBIR Phase I 2007 Department of DefenseAir Force -
Advanced Large Diameter Air Seals
SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC. Topic: AF071187The challenges facing seals for large diameter rotor systems is the requirement to accommodate centrifugal and axial growth of 0.150 inches or more due to loads on the rotating engine components; accommodate surface speeds in excess of 1200 ft/sec; and be capable of operating reliably at temperatures in excess of 800° F. MiTi® proposes the development of its close clearance, non-contacting, com ...
SBIR Phase I 2007 Department of DefenseAir Force -
Advanced Life Raft Fabrics (1001-050)
SBC: TRITON SYSTEMS, INC. Topic: AF071123Triton Systems Inc proposes to develop new life raft fabric materials which is composed of nanoparticle filled outer coating layers laminated to a core fabric. The nanoparticle filled coating layers will provide improved abrasion and puncture resistance while providing exceptional gas barrier properties, while the strength will be provided by the nylon fabric. This technology, together with innova ...
SBIR Phase I 2007 Department of DefenseAir Force -
Advanced, Lightweight Structural Materials
SBC: Firehole Technologies, Inc. Topic: AF063009The extreme operating environment and high performance requirements of space vehicles and structures necessitate designs that simultaneously optimize mass efficiency and reliability. These criteria are in direct opposition since reliability comes with a weight penalty and, conversely, extreme mass efficiency leads to reduced reliability. These conflicting goals, in the unforgiving, expensive ope ...
SBIR Phase I 2007 Department of DefenseAir Force -
ADVANCED MAGNETIC TURBINE BEARINGS
SBC: IAP RESEARCH, INC. Topic: N/AMAGNETIC BEARINGS HAVE POTENTIAL FOR LONG LIFE OPERATION AT HIGH SPEEDS AND HIGH TEMPERATURES. THE OBJECTIVE OF THIS PROGRAM IS TO DEVELOP MAGNETIC BEARINGS WITH ADEQUATE LOAD AND STIFFNESS CAPABILITY FOR APPLICATION TO ADVANCED TURBINE USE. A NOVEL, NON-FERROMAGNETIC APPROACH WILL BE INVESTIGATED. DETAILED MECHANICAL, MAGNETIC, AND THERMAL ANALYSIS WILL BE PERFORMED TO DETERMINE FEASIBILITY.
SBIR Phase I 1987 Department of DefenseAir Force -
ADVANCED MANNED AERIAL SCOUT
SBC: Amas Consortium Topic: N/ATHE ADVANCED MANNED AERIAL SCOUT (AMAS) PROJECT ISA PHASE PROGRAM TO DEFINE AND DEVELOP A MODERN, LIGHT, FIXED-WING AIRCRAFT TO BE THE LINCHPIN OF COMBINED-ARMS OPERATIONS AND DOMINATE THE LOW-ALTITUDE BATTLEFIELD ARENA. IT IS INTENDED NOT ONLY TO REPLACE EXISTING OBSERVATION AIRCRAFT, BUT ALSO TO SUPPLANT THE CURTAILED OH-58D PROGRAM, COMPLIMENT THE LHX, ACAF, AND INTERIM CAS PROGRAM, AND MAKE PO ...
SBIR Phase I 1987 Department of DefenseAir Force -
Advanced Manufacturing Processes for Reduced Cost of Ceramic Matrix Composite Engine Components
SBC: Synterials, Inc Topic: AF06103The Phase II effort is to enhance the deposition rate of the pilot reactor, under design and construction, at the planned production facility. Currently the coating rate is limited to a reference rate of 1X. This work is to demonstrate, in the Synterials reactor, a rate of 5X. This rate is limited by the constraints on the pilot reactor. These improvements would be a major step toward reducing ...
SBIR Phase II 2007 Department of DefenseAir Force -
Advanced Manufacturing Techniques for High-Efficiency Functional Gradient Solid Oxide Fuel Cells
SBC: OPTOMEC, INC. Topic: AF06174Optomec’s M3D technology will be utilized to fabricate functionally graded fuel cell structures, a methodology that could result in significant performance/weight improvements over existing designs. One of the main applications for the light-weight, high performance cells is in UAVs (unmanned aerial vehicles) which are being used increasingly in military activities. Phase 1 research has clearl ...
SBIR Phase II 2007 Department of DefenseAir Force -
Advanced Micro Optics Technology
SBC: MZA ASSOCIATES CORP Topic: AF071003We propose to demonstrate two different novel process techniques for creating custom micro-optics.
SBIR Phase I 2007 Department of DefenseAir Force