You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: PROSENSING INC. Topic: AF17CT01
This Phase I STTR proposal describes the development of a dual frequency millimeter-wave sun tracking radiometer designed to measure total atmospheric attenuation from ground level to the top of the atmosphere.The suns brightness temperature, which is on the order of 10,000K at millimeter-wavelengths, provides an ideal background reference allowing high dynamic range estimation of total atmospheri ...STTR Phase I 2018 Department of DefenseAir Force
SBC: DYNAFLOW, INC. Topic: AF17BT001
The widespread use of Aqueous Film Forming Foams (AFFF) at DOD facilities for firefighting, training, and fire suppression systems has resulted in numerous contamination sites. The perfluoroalkyl (PFA) compounds used in the AFFF, such as perfluoroalkyl sulfonates (PFOS) and perfluoroalkyl carboxylic acids (PFOA) are extremely stable in the environment and have been shown to be resistant to typical ...STTR Phase I 2018 Department of DefenseAir Force
SBC: CFD RESEARCH CORPORATION Topic: AF18AT011
This SBIR project will develop and demonstrate efficient electron emitter based on carbon nanotubecopper (CNT-Cu) composite for passive discharging of spacecraft in plasma environment. A spacecraft moving through harsh plasma environment collects electrons, which leads to the spacecraft charging up to several kilovolts. High voltage between different parts of the spacecraft can ignite arcing, whic ...STTR Phase I 2018 Department of DefenseAir Force
SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION Topic: AF16AT17
Micro-RDC proposes to demonstrate the feasibility of developing low-cost, low-weight, reliable packaging materials and processes to produce low-power advanced Integrated Circuits (ICs) that can operate continuously at temperatures between -55C and +225...STTR Phase I 2016 Department of DefenseAir Force
SBC: METROLASER, INCORPORATED Topic: AF15AT38
ABSTRACT: An unseeded measurement technique is proposed for simultaneous spatially-resolved measurements of density, temperature, and velocity in hypersonic wind tunnel flows with the future potential for time-resolved measurement capability. A variant of filtered Rayleigh scattering (FRS) will be developed that takes advantage of unique monotonic relationships between molecular vapor cell filter ...STTR Phase I 2015 Department of DefenseAir Force
SBC: Enig Associates, Inc. Topic: AF15AT22
ABSTRACT: Enig Associates, Inc., a small business providing advanced modeling and simulation capabilities to the DoD and DoE, is proposing an innovative and novel electrical approach, using explosive-driven flux compression generators (FCG) to convert explosive chemical energy to electromagnetic energy with very high current output and superb energy conversion efficiency and then Joule heat light ...STTR Phase I 2015 Department of DefenseAir Force
SBC: CARBON TECHNOLOGY INC Topic: AF15AT15
ABSTRACT: Carbon nanotubes (CNTs) have great potential for high performance RF applications. Theoretical study has shown that the electrical current in a CFET is intrinsically linear. Today, linearity is the underlying limitation in increasing the data transport densities of wireless networks. The complex modulation protocols used to achieve higher data rates requires linear amplifiers. Increasing ...STTR Phase I 2015 Department of DefenseAir Force
Validation Experiments to Measure Transient Aerothermoelastic Response of a Curved Panel to Hypersonic FlowsSBC: METROLASER, INCORPORATED Topic: AF16AT24
An experiment to obtain validation data on the transient aerothermoelastic response of a curved panel in hypersonic flows will be designed and evaluated for its feasibility. Significant challenges must be overcome for a successful experimental campaign i...STTR Phase I 2016 Department of DefenseAir Force
SBC: INTELLIGENT FIBER OPTIC SYSTEMS CORP Topic: AF16AT16
Future gas turbine propulsion designs, in addition to incorporating variable geometrical engine features, will require controlling and integrating large power generation/extraction, as well as, managing thermal limits of the components. The engine contro...STTR Phase I 2016 Department of DefenseAir Force
SBC: Kord Technologies, Inc. Topic: AF18AT004
Design analysis of parachute recovery systems has relied on a combination of core design principles, historical empirical data, and extensive testing for decades. Parachute motion involves complex phenomena involving porous bluff-body aerodynamics and highly deformable cloth. The proposed project is a plugin for the DoD CREATE-AV Kestrel simulation suite that will enable high-fidelity simulations ...STTR Phase I 2018 Department of DefenseAir Force