List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Small, Portable, and Powerless Sterilization System for Medical/Dental Instruments

    SBC: Lynntech Inc.            Topic: A05167

    The U.S. military has a significant need to sterilize medical and dental instruments in environments where standard non-portable, power-consuming sterilization methods are limited and/or unavailable. Lynntech proposes to develop a small, light-weight, and powerless steam sterilization system for field use. The system includes small, disposable heating/cooling cartridges that exploit well-known e ...

    SBIR Phase I 2005 Department of DefenseArmy
  2. A Novel Embedded Sensor Array for Corrosion Monitoring

    SBC: Lynntech Inc.            Topic: A05225

    Military vehicles such as trucks, tanks, aircraft, and ships are used in a variety of harsh environmental conditions such as salt water oceans, arid desserts, the humid tropics, as well as cold climates. As a result of these extreme environmental conditions, the Department of Defense spends close to $20 billion annually in corrosion-related maintenance, repair/replacement, and personnel costs. C ...

    SBIR Phase I 2005 Department of DefenseArmy
  3. A Novel, Small High-power Output Biofuel Cell

    SBC: Lynntech Inc.            Topic: AF05148

    The development of small, high-power output biofuel cells as alternate power sources are very important for stand-alone sensors, sight and illumination devices, implantable devices, and biological sensors. The biofuel cells must be lightweight, cost-effective, and provide greater power densities than currently available power sources. This Phase I SBIR proposal describes the development of a dua ...

    SBIR Phase I 2005 Department of DefenseAir Force
  4. A Plasma-Based Multi-Fuel Reformer

    SBC: Lynntech Inc.            Topic: AF05282

    Natural gas is an ideal feedstock for hydrogen reformers in the United States because it is inexpensive, hydrogen rich, and readily available in the United States. Oversees, natural gas is not readily available; however JP-8, the NATO single fuel for the battlefield is readily available anywhere the Air Force would be deployed. Hydrogen reformers exist today that utilize either natural gas or JP ...

    SBIR Phase I 2005 Department of DefenseAir Force
  5. Rugged, Hand-held, and Array-based Traumatic Brain Injury Biomarker Biosensor

    SBC: Lynntech Inc.            Topic: OSD05T003

    On the battlefield, 30-40% of all injuries have a head injury component. A field medic must quickly assess the extent of brain injury for rapid triage of the injured soldier. Researchers have identified traumatic brain injury (TBI) related biomarkers that appear in blood some time after trauma has occurred. Lynntech proposes to develop a handheld, rugged, reagentless, inexpensive, and versatile (p ...

    STTR Phase I 2005 Department of DefenseArmy
  6. Innovative, Weight Efficient, Composite/Metallic Structural Joining Concepts

    SBC: M&P TECHNOLOGIES, INC.            Topic: AF05248

    Currently aircraft composite and metal structures are joined by fastening them in place using riveted or bolted joints. Although fastened joints largely avoid concerns associated with thermally induced stresses and strains from CTE mismatches, such designs add weight, manufacturing complexity and cost to the design. Recent advances have given rise to new opportunities to increase the integrity a ...

    SBIR Phase I 2005 Department of DefenseAir Force
  7. Novel High Temperature, High Strength, Oxide-resistant Composites for Wind Tunnel

    SBC: MATERIALS PROCESSING, INC.            Topic: AF05298

    To produce a hypersonic flight vehicle, it is necessary to utilize an airbreating propulsion cycle. Most US aeropropulsion programs focus on the operation of a multi-mode engine with a ramjet and scramjet cycle that allows speeds from Mach 2 to over Mach 8. The testing of these engines is possible on the ground, in specially designed wind tunnels. The desire to simulate flight at Mach 8 or more ...

    SBIR Phase I 2005 Department of DefenseAir Force
  8. Laser Assisted Machining Applied to Rifling of Ceramic Barrels

    SBC: MATERIALS PROCESSING, INC.            Topic: A04058

    Ceramic barrels have found little application as their extreme hardness make them quite brittle and difficult to machine. Grinding and diamond machining have found some success but both yield very low material removal rates and can induce defects. To address this problem Nanohmics Inc. and Dr. Y. C. Shin of Purdue University propose to apply the recently developed technique of laser assisted machi ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. Enhancement of YBCO Coated Conductor Performance by In Situ Chemical Pinning

    SBC: METAL OXIDE TECHNOLOGIES INCORPORATED            Topic: N/A

    Advanced coated conductor development for high current carrying capacity HTS wires and tapes requires a high current density and also a large YBCO film thickness in the coated conductor. The inclusion of secondary phase particles, i.e., Chemical Pinning, is a highly viable approach to increase Jc from a production point of view, especially since in our application of metal organic chemical vapour ...

    SBIR Phase I 2005 Department of DefenseAir Force
  10. Enhancement of YBCO Coated Conductor Performance by In Situ Chemical Pinning

    SBC: METAL OXIDE TECHNOLOGIES INCORPORATED            Topic: OSD04EP6

    Advanced coated conductor development for high current carrying capacity HTS wires and tapes requires a high current density and also a large YBCO film thickness in the coated conductor. The inclusion of secondary phase particles, i.e., Chemical Pinning, is a highly viable approach to increase Jc from a production point of view, especially since in our application of metal organic chemical vapour ...

    SBIR Phase II 2005 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government