You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. STRUCTURAL LATCH MECHANISM CONCEPTS WILL BE DEVELOPED TO BE USED ON FUTURE FIGHTER AIRCRAFT FOR INTERFACING THE CREW ESCAPE CAPSULE WITH THE AIRFRAME.

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    STRUCTURAL LATCH MECHANISM CONCEPTS WILL BE DEVELOPED TO BE USED ON FUTURE FIGHTER AIRCRAFT FOR INTERFACING THE CREW ESCAPE CAPSULE WITH THE AIRFRAME. THE F-111 ESCAPE CAPSULE DESIGN WILL AID IN THE GENERATION AND VALIDATION OF PRELIMINARY DESIGN REQUIREMENTS. THREE PHILOSOPHIES WILL BE CONSIDERED IN DEVELOPING THE DESIGN CONCEPTS. ONE WILL MAXIMIZE THE LOAD DISTRIBUTION BETWEEN THE TWO STRUCTURES ...

    SBIR Phase I 1986 Department of DefenseAir Force
  2. THIS PROJECT PROPOSES TO CONDUCT A LIMITED NUMBER OF MUCK FLOW EXPERIMENTS USING A CONTROLLED MUCK MATERIAL AND A SPECIALLY FABRICATED CHUTE SYSTEM.

    SBC: Shannon & Wilson Inc            Topic: N/A

    THIS PROJECT PROPOSES TO CONDUCT A LIMITED NUMBER OF MUCK FLOW EXPERIMENTS USING A CONTROLLED MUCK MATERIAL AND A SPECIALLY FABRICATED CHUTE SYSTEM. THE PROJECT WILL ATTEMPT TO DETERMINE HOW SOME OF THE FLOW FACTORS INTERACT WITH ONE ANOTHER TO INFLUENCE MUCK FLOW RATE. MEASUREMENTS OF MASS FLOW RATE IN TERMS OF THE RATE OF MUCK ACCUMULATION AT THE END OF THE CHUTE WILL BE MADE FOR 2 CHUTE ANGLES ...

    SBIR Phase I 1986 Department of DefenseAir Force
  3. DEVELOPMENT OF AN IMPROVED NECK FOR EJECTION SYSTEM TESTING MANIKINS

    SBC: Simula, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  4. LIGHTWEIGHT SEALED PARACHUTE AND HARNESS ASSEMBLY

    SBC: Simula, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseNavy
  5. ELASTOMERIC MATRIX MATERIALS FOR USE IN AIRCRAFT PRIMARY STRUCTURES EVALUATION

    SBC: Simula, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseArmy
  6. HYDRAULIC EXPLOSIVE TECHNIQUE FOR RAPID EGRESS

    SBC: Waterjet Technology Inc            Topic: N/A

    THE PROPOSED PROJECT ADDRESSES THE NEED FOR CONTINUOUS HARD ROCK EXCAVATION TECHNIQUES WHICH EXPLOIT THE EFFICIENCY AND VERSATILITY OF EXPLOSIVE ROCK FRAGMENTATION WHILE OVERCOMING THE DELAYS AND HAZARDS ASSOCIATED WITH THE USE OF CHEMICAL EXPLOSIVES. AN EVALUATION WILL BEMADE OF THE FEASIBILITY OF USING A HYDRAULIC EXPLOSIVE DEVICE FOR RAPID, ENERGY EFFICIENT EXCAVATION OF HARD ROCK. THE DEVICE W ...

    SBIR Phase II 1986 Department of DefenseAir Force
  7. FLAW INSPECTION IN NONFERROUS CONDUCTORS USING MAGNETO- OPTIC DETECTION METHODS

    SBC: Sigma Research Corp            Topic: N/A

    A NEW METHOD FOR ACHIEVING VISUALIZATION OF FLAWS IN NONFERROUS CONDUCTORS SUCH AS ALUMINUM IS PROPOSED. LESS DIRECT VISUALIZATION TECHNIQUES, INCLUDING EDDY CURRENT AND DYE PENETRANT TECHNIQUES, ALREADY EXIT. HOWEVER, THESE METHODS ARE TIME CONSUMING AND REQUIRE CONSIDERABLE SUPPORT AND PREPARATION. THE NEW METHOD PROPOSES TO ACCOMPLISH DIRECT VISUALIZATION OF FLAWS IN NONFERROUS MATERIALS USING ...

    SBIR Phase II 1986 National Science Foundation
  8. THIS PROJECT WILL DEVELOP HIGH-TEMPERATURE AMORPHOUS INTERMETALLIC ALLOYS WITH CRYSTALLIZATION TEMPERATURES, TX, AS HIGH AS 1000OC (1273K) FOR EXTENDED APPLICATION IN OXIDATION, SULFIDATION, CORROSION, WEAR, AND CATALYTIC REACTIONS.

    SBC: Flow Research Inc            Topic: N/A

    THIS PROJECT WILL DEVELOP HIGH-TEMPERATURE AMORPHOUS INTERMETALLIC ALLOYS WITH CRYSTALLIZATION TEMPERATURES, TX, AS HIGH AS 1000OC (1273K) FOR EXTENDED APPLICATION IN OXIDATION, SULFIDATION, CORROSION, WEAR, AND CATALYTIC REACTIONS. PHASE I OF THE PROJECT WILL ESTABLISH CRITERIA FOR QUANTITATIVE INTERPRETATION AND PREDICTION OF CRYSTALLIZATION TEMPERATURE OF BINARY AMORPHOUS INTERMETALLIC COMPOUND ...

    SBIR Phase I 1986 Department of Energy
  9. WHISKER MATRIX INTERFACE IN CERAMIC-CERAMIC COMPOSITES

    SBC: Flow Research Inc            Topic: N/A

    THE PROPOSED WORK WILL EVALUATE THE FEASIBILITY OF USING PROCESSING SCIENCE TO TAILOR THE COMPOSITION AND INTERFACE BONDING OF WHISKER-REINFORCED CERAMIC COMPOSITES. MICROSTRUCTURAL CONTROL WILL BE EVALUATED BY VARYING GEL STRUCTURES (COLLOIDAL VERSUS POLYMERIC) AND SINTERING (LIQUID STATE VERSUS SOLID STATE) CONDITIONS. THE MULLITE-MULLITE AND MULLITE-ALUMINA COMPOSITES WERE SELECTED FOR THE STUD ...

    SBIR Phase I 1986 Department of Energy
  10. THE DIRECT PRODUCTION OF INTERMETALLIC COM- POUND POWDER

    SBC: ATS-MER, LLC            Topic: N/A

    THE PRESENT PROCESS OF PRODUCING INTERMETALLIC ALLOY POWDER BY MELTING, CASTING, AND A POWDER ATOMIZA- TION STEP IS EXPENSIVE AND TECHNICALLY LACKING, THUS LIMITING THE ULTIMATE MECHANICAL AND PHYSICAL PRO- PERTIES OF THE INTERMETALLIC MATERIAL. THIS PROJECT EX- AMINES THE FEASIBILITY OF PRODUCING NICKEL AND TITA- NIUM ALUMINIDE INTERMETALLIC ALLOY POWDER BY THE DIRECT REDUCTION OF METAL CHLORIDE ...

    SBIR Phase II 1986 Department of Energy
US Flag An Official Website of the United States Government