You are here

Home » Reports

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 81 - 90 of 3834 results
 
  • Record 1 TO 1000
  • Record 1001 TO 2000
  • Record 2001 TO 3000
  • Record 3001 TO 3834

  1. LOW-COST COMPOSITE MANUFACTURING PROCESS

    SBC: Adherent Technologies, Inc.            Topic: N/A

    THE ADVANTAGES OF THERMOPLASTIC MATRIX COMPOSITES FOR MANUFACTURING LOW-COST CMPONENTS HAVE YET TO BE REALIZED. AN IMPORTANT FACTOR LIMITING THERMOPLASTIC COMPOSITES IS THE LACK OF LOW-COST METHOD FOR PRODUCING HIGH-QUALITY PREPREGS AND PREFORMS. A METHOD OF PRODUCING THESE MATERIALS THAT IS COMPATIBLE WITH COMMONLY USED COMPOSITE FABRICATION TECHNIQUES SUCH AS FILAMENT WINDING, PULTRUSION, AND PR ...

    SBIR Phase II 1996 National Science Foundation

  2. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy

  3. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy

  4. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy

  5. Inflatable Spacecraft Using &quotRigidization On Command&quotTechnology

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration

  6. Ultrafast Polysilylene Scintillators

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy

  7. HIGH-TEMPERATURE FINISH FOR AMB-21 MATRIX COMPOSITES

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration

  8. SBIR Phase I: Tertiary Recycling Process for Polymer-Based Automotive Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1998 National Science Foundation

  9. PROPERTY RESTORAL ALGORITHMS FOR BLIND ADAPTATION OF RECEIVE-PATH & TRANSMIT-PATH ANTENNA ARRAYS IN GROUND-BASED COMMUNICATION SYSTEM

    SBC: Adv Countermeasure Sys            Topic: N/A

    AN SBIR PROJECT IS PROPOSED HERE TO DEVELOP NOVEL TECHNIQUES FOR DIRECTIVE/RETRODIRECTIVE COMMUNICATIONS, BY USING BLIND ADAPTATION ALGORITHMS TO ADJUST THE ARRAY WEIGHT ON THE RECEIVE/TRANSMIT PATHS OF A COMMUNICATION SYSTEM. THE PROPOSED PROCESSOR HAS THE CAPABILITY TO AUTOMATICALLY EXTRACT SIGNALS FROMTHE RECEIVED ENVIRONMENT, AND TO TRANSMIT SIGNALS BACK TO THE SIGNAL SOURCE USING AN ANTENNA P ...

    SBIR Phase I 1990 Department of DefenseArmy

  10. THREAT MISSILE SIMULATOR TECHNOLOGY

    SBC: Adv Countermeasure Sys            Topic: N/A

    THE OBJECTIVE OF THIS SBIR PROJECT IS TO IDENTIFY THE MEANS TO SUBSTANITALLY REDUCE THE SIZE AND WEIGHT OF THE ALQ-170 ELECTRONICS PACKAGE WHILE IMPROVING THREAT SIGNAL FIDELITY AND ADDING VERSATILITY. THE INITIAL EFFORT CONSISTS OF A STUDY TO BASELINE THE CURRENT PERFORMANCE OF THE ALQ-170 AND ITS SUBSYSTEMS, AND IDENTIFY AREAS WHERE IMPROVEMENT IS REQUIRED. NEXT, SUBSYSTEM PERFORMANCE SPECIFICAT ...

    SBIR Phase I 1990 Department of DefenseNavy
US Flag An Official Website of the United States Government