You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High-Sensitivity Monolithic Silicon CMOS APD and ROIC

    SBC: FREEDOM PHOTONICS LLC            Topic: AF14AT13

    ABSTRACT: In this effort, Freedom Photonics will develop a high-sensitivity high-resolution coherent imaging system based on a Si avalanche photodiode (APD) array and corresponding bias and read-out electronics. This will be a monolithic APD and ROIC (readout-integrated-circuit) focal plane array (FPA) system. We start from a proven high-performance CMOS electronics backplane and build the photon ...

    STTR Phase I 2015 Department of DefenseAir Force
  2. AFSCN Upgrade Based on Smart Antenna and Cognitive Satellite Radio

    SBC: INTELLIGENT FUSION TECHNOLOGY, INC.            Topic: AF14AT16

    ABSTRACT: This proposal presents an Air Force Satellite Control Network (AFSCN) upgrade scheme using smart antenna and cognitive satellite radio techniques. On the remote tracking station (RTS) side, switched beam smart antenna, distributed beam forming technique, multiple access technique based on FDMA and/or CDMA are applied to obtain multiple satellites reception objective. On the satellite si ...

    STTR Phase I 2015 Department of DefenseAir Force
  3. A Range Segment Upgrade for Air Force Satellite Control Network with Smart Antennas and Cognitive Satellite Radios

    SBC: INFOBEYOND TECHNOLOGY LLC            Topic: AF14AT16

    ABSTRACT: A range segment upgrade for Air Force satellite control network (AFSCN) will significantly improve system effectiveness via spectrum sharing and seamless interoperation. However, the upgraded system requires new capabilities such as real-time and accurate RF interference detection and mitigation, array antenna backlobe/sidelobe suppressions, accurate performance degradation prediction, ...

    STTR Phase I 2015 Department of DefenseAir Force
  4. GUARD: A Game-theoretic Universal Anti-RFI Defense framework for Satellite Communication

    SBC: INTELLIGENT FUSION TECHNOLOGY, INC.            Topic: AF14AT17

    ABSTRACT: In this proposal a Game-theoretic Universal Anti-RFI Defense (GUARD) framework for Satellite Communications is proposed. Key components of the GUARD framework include i) Radio Frequency Interferences (RFI) modeling and impact evaluation infrastructure, which allows the evaluation of the impact of RFI from various sources, and provides a comprehensive RFI knowledge base to SATCOM; ii) RF ...

    STTR Phase I 2015 Department of DefenseAir Force
  5. Phase Transitions, Nucleation and Mixing Modeling through Trans-Critical Conditions

    SBC: CASCADE TECHNOLOGIES INC            Topic: AF14AT23

    ABSTRACT: In this proposal, researchers from Cascade Technologies and Professors Matthias Ihme and Ali Mani from Stanford University lay out a plan to develop predictive modeling tools for transcritical flows. Phase I of the three phase plan is outlined in detail and extensions are proposed for Phases II and III. Central points of the Phase I plan include: A comprehensive review and assessment ...

    STTR Phase I 2015 Department of DefenseAir Force
  6. Low-Latency Embedded Vision Processor (LLEVS)

    SBC: SA PHOTONICS, LLC            Topic: AF15AT13

    ABSTRACT: Digital binocular helmet-mounted display (HMD) systems are now available that allow high resolution wide field-of-view (WFOV) digital imagery to be displayed on high resolution microdisplays. These digital HMD systems require a low-latency embedded vision processor (LLEVS) capable of implementing the necessary image processing algorithms. An SA Photonics LLEVS will be implemented on next ...

    STTR Phase I 2015 Department of DefenseAir Force
  7. Embedded Sensors for Flight Test (Every Aircraft a Test Aircraft)

    SBC: NEXTGEN AERONAUTICS, INC.            Topic: AF14AT01

    Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...

    STTR Phase II 2016 Department of DefenseAir Force
  8. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD RESEARCH CORPORATION            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  9. High Hesitivity Magnetic Materials for Magnetic Toroid and Flat Dipole Antennas

    SBC: JEM ENGINEERING, LLC            Topic: N16AT001

    In our Phase I program, JEM and ASU will demonstrate a low cost manufacturing process to achieve the full theoretical hesitivity of a magnetic film that would enable greater effective hesitivity laminate. In Phase II we will develop a viable continuous process for two such materials to achieve light weight, low cost, and improved radiation efficiency; and we will seek to productize this process to ...

    STTR Phase I 2016 Department of DefenseNavy
  10. Process diagnostics to quantify mechanical performance of AM parts

    SBC: POLARONYX INC            Topic: N16AT004

    This Navy STTR Phase I proposal presents an unprecedented NDI tool to quantify mechanical properties of metal parts made with laser additive manufacturing with material characteristics and process parameters. A fiber laser SAW and heterodyne detection is used with LIBS to study both in-process and post-process for both flat and shaped parts. It is the enabling technology for characterize the AM pa ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government