You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Polymer Based, Thermally Conductive and Erosion Resistant Boot Materials/Concepts for Rotor Blade Leading Edge Protection

    SBC: HONTEK CORP.            Topic: N06T013

    The leading edge of the V-22 rotor blade is made of titanium and nickel abrasion strips bonded to the composite substrate. Although effective for rain erosion protection, nickel and titanium show poor sand erosion resistance. In addition, this metal and composite hybrid configuration limits working strain and fatigue life. This hybrid concept also hampers field serviceability and increases the ...

    STTR Phase I 2006 Department of DefenseNavy
  2. Flex-Skins Using Cellular Cores (XSCL)

    SBC: NEXTGEN AERONAUTICS, INC.            Topic: AF06T013

    Morphing aircraft structures have been under focused development over the last five years, primarily under DARPA and Air Force sponsorship. NextGen has been a leader in this effort; prior and on-going work by the NextGen team has identified significant technology barriers which need fundamental understanding as well as innovative solutions. Key among these is the development of skins which have in ...

    STTR Phase I 2006 Department of DefenseAir Force
  3. High Speed CMC Laser Machining

    SBC: PHYSICAL SCIENCES INC.            Topic: N06T012

    Physical Sciences Inc. (PSI) proposes to develop a high speed laser machining process for ceramic matrix composites. The recent development of high rate, high pulse power lasers and the non-contact nature of the PSI process minimize the damage typical of other laser machining processes. It also enables precise placement of through holes, trenches and identification markings. The goal of the Phase ...

    STTR Phase I 2006 Department of DefenseNavy
  4. Thermally-Conductive Nanocomposite Elastomer Boot System (TCNEBS) for V-22 Rotor Blade Leading Edges

    SBC: Infoscitex Corporation            Topic: N06T013

    The metal sheath used to protect the V-22 aircraft rotor blade leading edge against sand, rain and ice erosion, and provide heating to prevent ice buildup, is heavy, rigid and expensive. An elastomeric boot can offer lower weight, flexibility, abrasion-resistance and field repairability. However, elastomeric boots have exhibited delamination and creep failure caused by high centrifugal loads and ...

    STTR Phase I 2006 Department of DefenseNavy
  5. Combustion Stability Innovations for Liquid Rocket

    SBC: METACOMP TECHNOLOGIES INC            Topic: AF06T005

    The proposed effort can provide the framework for a unified modeling & simulation program to substantially improve the capability for understanding, analyzing, and predicting the underlying mechanisms dictating the combustion stability characteristics of liquid-propellant rocket engines. Emphasis will be placed on the effects of atomization, mixing, and distributed combustion of liquid oxygen (LO ...

    STTR Phase I 2006 Department of DefenseAir Force
  6. Development of Dilute Nitride SL Technology for VLWIR Detectors

    SBC: Epitaxial Technologies, LLC            Topic: MDA06T011

    Epitaxial Technologies' overall objective is to develop innovative detector technologies that can be used to produce enhanced quantum efficiency and high detectivity VLWIR sensors that can operate at high temperatures. The goal of Phase I will be to investigate dilute nitride strain layer superlattice material structures that are capable of enhanced gain and detectivity and then grow and fabricate ...

    STTR Phase I 2006 Department of DefenseMissile Defense Agency
  7. Innovative Technologies Supporting Affordable Increases in Power, Efficiency, and Bandwidth for Ballistic Missile Defense System (BMDS) X-Band Radars

    SBC: Group4 Labs, LLC            Topic: MDA06T012

    This Phase-I STTR MDA Proposal proposes the use of a new class of diamond-seeded solid-state material system for the manufacture of virtually all heat-generating solid-state electronics in X-band and Ballistic Missile Defense radar components and systems. In this proposal wherein much preliminary (DARPA- and MDA-funded) work has been demonstrated hitherto by the authors, all or most of the basic s ...

    STTR Phase I 2006 Department of DefenseMissile Defense Agency
  8. Software Tool for Composite Durability Prediction

    SBC: METIS DESIGN CORPORATION            Topic: A06T027

    Durability is the effect of time dependant processes, including fatigue, creep, moisture absorption, thermal-oxidation, abrasion, chemical reactions and physical ageing on mechanical properties. The ability to predict accurately the durability of composite materials and structures is critical to successfully designing for longevity. The existence of models alone is not sufficient; practical soft ...

    STTR Phase I 2006 Department of DefenseArmy
  9. Real Time Parallel Channel Spectrometer for 3D Cloud Profiling

    SBC: Optra, Inc.            Topic: A06T023

    OPTRA is proposing the development of a 3D cloud profiling system that combines an innovative Imaging Open Path Fourier Transform Infrared Spectrometer (I-OPFTIR) with advanced computational tomography algorithms. The proposed technology expands the capability of OP-FTIR systems to 3D profiling applications. It does this by adding a spatially dispersed array of sensors at the focal plane of a si ...

    STTR Phase I 2006 Department of DefenseArmy
  10. CIFTS:Communications and Information Flow Tracking System

    SBC: APTIMA INC            Topic: AF06T027

    Electronic text chat has become a primary medium of communication throughout the military over the past fifteen years. In organizations such as the Air and Space Operations Center’s Dynamic Targeting Cell (DTC), it is used extensively among team members as they collaboratively process information about time sensitive targets for prosecution. To assure the highest degree of performance, operators ...

    STTR Phase I 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government